Casio Projector XJ-A155V XJ-A235V User Manual

							
21
Drive Menu
Entering the Presentation Mode, Slide Mode, or Movie Mode while there are multiple memory devices 
connected to the Data Projector (multiple USB memory devices connected via a USB hub, multiple 
memory cards loaded in the memory card reader connected to the Data Projector, etc.) will cause a 
menu like the one shown below to appear on the projection screen.
When this happens, use the cursor ke ys to move the highlighting to the drive you want to use and then 
press the [ENTER] key. This will display a menu of files for the mode you are entering.
NoteThe Data Projector can recognize up to four drives. 
						

							22
Projecting an ECA (Presentation) File
Use the Viewer Presentation Mode to project ECA files.
To project an ECA file
1.Connect the memory device where the ECA file you want to project is stored to 
the Data Projector.
 This will project the main Viewer window. If the main Viewer window does not appear, press 
the [INPUT] key and select “USB” as the input source.
2.Use the cursor keys to move the highligh ting to “Presentation” and then press 
the [ENTER] key.
 This will project a file menu like the one shown below.
 If the ECA file you want to play back is located in a particular folder, use the cursor keys to 
move the highlighting to that folder and then press the [ENTER] key.
3.Use the cursor keys to move the highligh ting to the ECA file you want to play 
back and then press the [ENTER] key (or the [ O] key).
 This will start playback of the selected ECA file.
4.Perform page change and other operations as required.
For details about operations you  can perform during projection of an ECA file, see “Operations 
during ECA File Projection” (page 23).
 To stop ECA file playback  and return to the file menu, press the [ESC] key. 
						

							23
Operations during ECA File Projection
The operations described below can be performed while an ECA file is playing.
The operations described below can be performed while ECA  file playback is paused.
To do this:Perform this operation:
Go to the previous page Press the [] key.
Go to the next page Press the [] key.
Pause ECA file playback 1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor keys to move the  highlighting to “Pause” and  then press the [ENTER] key.
Jump to a specific page 1. Press the [O] key to display a page menu.
2. Use the cursor keys to move the highlighting to the thumbnail of the page  where you want to start playback of the presentation and then press the 
[ENTER] key.
 For information about the other operations you can perform while the page 
menu is displayed, see “Page Menu Operations” (page 24).
Stop playback and return to the file 
menu Press the [ESC] key.
To do this:Perform this operation:
Resume ECA file  playback from 
where it was paused Press the [ENTER] key. 
						

							24
Page Menu Operations
Pressing the [O] key while an ECA file is being played will project a page menu like the one shown 
below.
The operations described below  can be performed while the page menu is being projected.
To do this:Perform this operation:
Re-start file playback from a 
particular page Use the cursor keys to move the high
lighting to the thumbnail of the page 
where you want to start playback of the presentation and then press the 
[ENTER] key.
Scroll to the next screen Press the [ Z] key.
Scroll to the previous screen Press the [ f] key.
Stop playback and return to the file 
menu Press the [ESC] key. 
						

							25
Projecting an Image File
Use the Viewer Slide Mode to project image files. You can also group image files and project them in a 
specific sequence as a slideshow.
To project an image file
1.Connect the memory device where the image file you want to project is stored to 
the Data Projector.
 This will project the main Viewer window. If the main Viewer window does not appear, press 
the [INPUT] key and select “USB” as the input source.
2.Use the cursor keys to move the highli ghting to “Slides” and then press the 
[ENTER] key.
 This will project a file menu like the one shown below.
 If the image file you want to project is located in a particular folder, use the cursor keys to 
move the highlighting to that folder and then press the [ENTER] key.
3.Use the cursor keys to move the highli ghting to the image file you want to 
project and then press the [ENTER] key.
 This will project the selected image file.
4.Perform the operations described below as required.
5.To stop image projection and return to  the file menu, press the [ESC] key.
To do this:Press this key:
Scroll back to the previous image [ ]
Scroll forward to the next image [ ]
Rotate the image right 90 degrees [ f]
Rotate the image left 90 degrees [ Z]
Start a slideshow from the image file [ O] 
						

							26
Projecting a Slideshow
The Data Projector’s Slide Mode lets you group multiple image files and project them in sequence as a 
slideshow. You can select either manual playback or auto playback for slideshow image display. The 
initial default setting is manual playback.
To prepare image files for slideshow play
Note the following points when preparing your slideshow on your computer.
 All of the image files in the slideshow must be in the same folder.
 Images will appear during a slideshow in the file name sequence the image files are arranged in the 
folder. To display images in a specific sequence, adjust their file names so they are listed in the 
folder in the sequence you want.
 Copy the folder with the slideshow images to a memory device.
To project image files as a slideshow
1.Connect the memory device where the image  files of the slideshow are stored to 
the Data Projector.
 This will project the main Viewer window. If the main Viewer window does not appear, press 
the [INPUT] key and select “USB” as the input source.
2.Select either manual or auto scroll,  and configure other slideshow settings.
For more information, see “Configu ring Viewer Settings” (page 33).
3.Use the cursor keys to move the highli ghting to “Slides” and then press the 
[ENTER] key.
 This will project a file menu.
4.Use the cursor keys to move the highligh ting to the folder that contains the 
image files that make up your slides how and then press the [ENTER] key.
5.Use the cursor keys to move the highligh ting to the image file you want to start 
the slideshow from and then press the [ O] key.
 This will project the selected image file and start the slideshow. 
						

							27
6.Perform the operations described below as required.
The following operations can be performed while a slideshow is paused.
7.To return to the file menu after the sl ideshow is complete, press the [ESC] key.
Projecting a Movie File
Use the Viewer Movie Mode to project movie files.
NoteViewer supports playback of Motion JPEG form at AVI movie files (see page 5 for details). 
Playback of other format movie files is not supported.
 The CD-ROM that comes with th e Data Projector contains software (ArcSoft MediaConverter 
3 for CASIO Projector) for converting some movie file formats to the supported format. For 
information about installing this software , see “Installing the Software” (page 8).
To do this:Perform this operation:
Scroll back to the previous image Press the [ ] key.
Scroll forward to the next image Press the [ ] key.
Pause the slideshow (This option is available only 
when “Auto” is specified  for the “Image Switching” 
setting on the setup menu.) 1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor 
keys to move the highlighting to “Pause” and then 
press the [ENTER] key.
Rotate the image right 90 degrees Press the [ f] key.
Rotate the image left 90 degrees Press the [ Z] key.
To do this:Press this key:
Scroll back to the previous image [ ]
Scroll forward to the next image [ ]
Rotate the image right 90 degrees [f ]
Rotate the image left 90 degrees [Z ]
Resume the slideshow [O ] 
						

							28
To project a movie file
1.Connect the memory device where the movie file you want to project is stored to 
the Data Projector.
 This will project the main Viewer window. If the main Viewer window does not appear, press 
the [INPUT] key and select “USB” as the input source.
2.Use the cursor keys to move the highli ghting to “Movie” and then press the 
[ENTER] key.
 This will project a file menu like the one shown below.
 If the movie file you want to play back is located in a particular folder, use the cursor keys to 
move the highlighting to that folder and then press the [ENTER] key.
3.Use the cursor keys to move the highligh ting to the movie file you want to play 
back and then press the [ENTER] key (or the [ O] key).
 This will start playback of the selected movie file.
4.Perform pause and other operations as required.
For details about operations you can perform during projection of a movie file, see 
“Operations during Movie File Projection” (page 29).
 To stop movie file playback and return  to the file menu, press the [ESC] key.
 When playback reaches the end of the movie file, the projection image will show a still image 
of the final movie frame.
5.To return to the file menu after movie  playback is complete, press the [ESC] key. 
						

							29
Operations during Movie File Projection
The operations described below can be performed while a movie file is playing or paused.
* For details about fast forward and fast reverse, see “To perform fast forward and fast reverse during 
movie playback”, below.
To perform fast forward and fast reverse during movie playback
1.Perform steps 1 through 3 under “To proj ect a movie file” (page 28) to start 
playback of the movie file.
2.Press the [ ] key for fast forward or the [ ] key for fast reverse.
 This starts the corresponding operation and displays an icon (  for fast forward,   for 
fast reverse) in the upper left corner of the projection screen.
 Each press of the [ ] or [ ] key cycles the corresponding operation between three speeds.
 Movie playback stops automatically when a fast forward or fast reverse operation reaches the 
last or the first frame of the movie file.
To do this:Perform this operation:
Pause and resume movie playback Press the [ENTER] key.
 A pause icon ( ) is displayed  in the upper left corner of 
the projection screen while movie projection is paused.
Re-play the file from the beginning 1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor keys to  move the highlighting to “Play from beginning” and then 
press the [ENTER] key.
Display the play time in the upper left corner of 
the projection screen Press the [
O] key.
 Each press of the [ O] key toggles the time indicator between 
show and hide.
Fast forward
*Press the [ ] key.
Fast reverse
*Press the [ ] key.
Stop ECA file playback  and return to the file 
menu Press the [ESC] key.
This icon:Indicates this:
Fast forward (10-second increment)
6X fast forward (60-second increment)
60X fast forward (10-minute increment)
Fast reverse (10-second increment)
6X fast reverse (60-second increment)
60X fast reverse (10-minute increment)
Total movie play time
Elapsed movie play time 
						

							30
3.Perform the operations described below as required.
File Menu Operations
This section explains operations you can perform while the file list is displayed in the Presentation, 
Slide, or Movie Mode.
List View and Icon View
There are two different views for the Viewer file menu: a list view and an icon view.
List view:
This view lists the names of the folders and files on a memory device. This is the initial default view for 
the Presentation, Slide, or Movie Mode.
Icon view:
This view shows both icons and names for the folders and files on a memory device. Thumbnails are 
displayed for all of the files that can be played back by the Viewer.
To do this:Press this key:
Quit a fast forward or fast reverse operation and resume normal playback [ENTER]
Toggle display of the playback time between show and hide [ O]
Stop playback and return to the file menu [ESC]
List view Icon view