Casio Projector XJ-A155V XJ-A235V User Manual

31
To toggle the file menu between the list view and icon view
Press the [FUNC] key and then the [ENTER] key.
NoteYou can specify either the list view or icon view as the default view. For more information, see 
“Configuring Viewer Settings” on page 33.
To scroll the file menu
Press the [Z] key to scroll forward, and the [ f] key to scroll back.
To open a folder
Use the cursor keys to move the highlighting to the folder you wa nt to open and then press the 
[ENTER] key.
To exit the current folder and...

32
To view file properties
1.Display the file menu list view.
2.Use the [] and [ ] keys to move the highlighting to the file whose properties 
you want to view.
 A thumbnail and the properties of the currently hi ghlighted file will appear on the left side of 
the file menu.
 The following explains the information that appears in file properties.
Presentation Mode
Slide Mode
Movie Mode
This item:Shows this:
Type “ECA File” (Presentation file  converted with EZ-Converter FA)
Size File size
Date Date...

33
To return to the main Viewer window
1.Press the [FUNC] key.
2.On the function menu that appears, use the cursor keys to move the highlighting 
to “Back to Viewer Selection” and then press the [ENTER] key.
Configuring Viewer Settings
You can use the Viewer setup menu to configure the Viewer function settings described below.
The initial default setting for each item is indicated by an asterisk ( *).
Setting NameDescription
Image Zoom Zoom*:
Causes images to be projected at the Data  Projector’s maximum...

34
To display the Viewer setup menu
Perform either of the following operations.
Operation 1
1.Project the main Viewer window.
If you are playing a file in the Presentation, Slide, or Movie Mode, pause playback and return 
to the file menu. Next, press [FUNC], then [ ], then [ENTER].
2.Use the cursor keys to move the highligh ting to “Viewer Setup” and then press 
the [ENTER] key.
Operation 2
1.While the Viewer is being proj ected, press the [MENU] key.
If you are playing a file in the Presentation,...

35
To configure Viewer settings
1.Display the Viewer setup menu.
2.Use the [] and [ ] keys to move the highlighting  to the item whose setting you 
want to change.
3.Use the [ ] and [ ] keys to display the available settings.
4.After configuring all the settings you want, press the [ESC] key (or press the 
[FUNC] key and then the [ENTER] key).
 This will return to the main Viewer window.
To return Viewer settings  to their initial defaults
1.Display the Viewer setup menu.
2.Use the [] key to move...

36
Refer to the following whenever Viewer operations are not what you expect.
Memory Devices
Viewer Troubleshooting
ProblemCause and Required Action
Viewer does not appear when I 
connect USB memory to the Data 
Projector’s USB port. 
The USB memory you are connecting may have a format that cannot be 
recognized by the Data Projector. Connect the USB memory to your 
computer to check if its file system is FAT or FAT32. If it isn’t, reformat the 
USB memory to FAT or FAT32. Note that doing so will delete...

37
File Display and Playback
ProblemCause and Required Action
ECA files converted from 
PowerPoint files using 
EZ-Converter FA do not appear in 
the file menu. Viewer may be in a mode other than the Presentation Mode. To enter the 
Presentation Mode, highlight “Presentation” on the main Viewer window 
(page 20) and then press the [ENTER] key.
Image files do not appear in the file 
menu. 
Viewer may be in a mode other than the Slide Mode. To enter the Slide 
Mode, highlight “Slides” on the main Viewer...

38
Viewer Error Messages
ProblemCause and Required Action
Folder does not contain any image 
files. There is no displayable folder, ECA file, 
image file, or movie file in the folder 
you are trying to access with Viewer. Use your computer to check the 
contents of the folder. For details about file formats supported for Data 
Projector playback, see “About the Data Projector’s USB Functions” (page 5).
This ECA file cannot be played 
back. There may be an error in the ECA file it
self. Play back the ECA...

39
Performing a Presentation Using the YC-400/YC-430 Document Camera
This section explains how to  connect the CASIO YC-400/YC-430 Mu lti Projection Camera (document 
camera) to the Data Projec tor in order to project the images of documents placed on the document 
stage of the document camera. The Data Projector’s built-in application named YC Camera is used to 
project document images.
Important!A YC-400 document camera  can be connected to the Data Projector only if it is running firmware 
version 1.1...

40
To connect the document camera to the Data Projector and project the 
image of a document
1.Turn on the Data Projector.
Wait until the Data Projector’s POWE R/STANDBY indicator is lit green.
2.Connect the document camera to the Data  Projector using the USB cable that 
comes bundled with the document camera.
3.With nothing on the docu ment stage, press the [P] (power) button on the 
camera stand.
 This will turn on the document camera, which will cause its lens to extend.
 The Data Projector will...