Casio Projector XJ-A155V XJ-A235V User Manual

11
Installing Multi Projection Camera Update Software
A YC-400 Multi Projection Camera can be connected to the Data Projector only if it is running firmware 
version 1.1 or higher. For information about how to check the firmware version of a camera, see the 
file named “YC-Update_Guide_English.pdf” in the “English” folder  inside the “User’s Guide” folder on 
the CD-ROM that comes with the projector.
To install Multi Projection Camera Update Software
1.Place the CD-ROM that comes with the pr ojector into...

12
Projecting the Contents of Files on a Memory Device
This section explains how to perform the following operations.
How to use EZ-Converter FA  computer software to convert Powe rPoint files to files that can be 
played back with the Data  Projector’s Viewer function.
 How to project the contents  of files stored on a memory device s with the Data Projector’s Viewer 
function.
Viewer is one of the Data Projec tor’s built-in applications. It lets you play back and project the 
contents of files from a...

13
Starting Up and Exiting EZ-Converter FA
To start up EZ-Converter FA
Perform either of the following operations to start up EZ-Converter FA on the computer.
Double-click the   icon  on your Windows desktop.
 On your computer’s Windows Start menu, select  [All Programs] - [CASIO] - [EZ-Converter FA].
Important!If your computer is running Windows Vista or Windows 7,  starting up EZ-Converter FA may 
cause the “User Account Control” message to appear. If it does, click [Allow].
EZ-Converter FA Window...

14
Converting a PowerPoint File to an ECA File
Important!Before performing any of the operations here,  you will need to have a file created using 
Microsoft Offi ce PowerPoint 2003, 2007 or 2010 on hand.
 Conversion of a PowerPoint file  to an ECA file requires playback of the original file from 
beginning to end. Note that th e time required for conversion will roughly correspond to the 
time required  for playback.
NoteStarting a conversion operation with EZ-Converter FA will temporarily change the...

15
6.Select the PowerPoint file you want to convert from and then click the [Open] 
button.
 This will display a dialog box like the one shown below for specifying the ECA file settings.
7.Configure the settings as re quired on the dialog box.
The following describes the meanings and settings of each of the items that appear on the 
dialog box.
8.After configuring all the settings you want, click [OK].
This will start playback of the PowerPoint file and start converting it to an ECA file.
 The...

16
To specify the screen resolution of the ECA file
1.Right-click the left side of the EZ-Converter FA window.
2.On the menu that appears,  click “Output Resolution”.
3.On the sub-menu that appears, select the resolution you want.
The following shows the resolution settings that  should be used for each Data Projector 
model.
 The setting you select here remains in effect until you change it.
To specify the maximum animation display time
1.Right-click the left side of  the EZ-Converter FA window.
2.On...

17
5.Click the   button to start playback.
This will display a control panel at the top of the screen.
 During file playback, you can use the control panel buttons to perform the operations 
described below.
To do this:Perform this operation:
Go to the previous page Click the   button.
Go to the next page Click the   button.
Jump to a specific page 1. Click the   button and then click “Slide Viewer” on the menu that appears. 2. On the page menu that appears, click the thumbnail  of the destination page...

18
Use the Data Projector’s Viewer application to project the contents of a file on a memory device. 
Viewer starts up automatically whenever you connect a memory device that is supported by the Data 
Projector into the Data  Projector’s USB port.
Connecting a Memory Device to the Data Projector
The Data Projector’s USB port supports connection of a FAT/FAT32 format memory device supported 
by the USB interface. The following are supported memory devices.
USB memory
 Memory cards
A commercially...

19
To connect a memory card to the Data Projector
1.Load the memory card into a USB card reader’s card slot.
For details about how to load a memory card into the USB card reader, see the user 
documentation that comes with the reader.
2.Connect the USB card reader to the Data Projector’s USB port.
To connect a digital camera to the Data Projector
1.If necessary, configure the digital cam era’s USB mass storage class setting.
2.Turn off the digital camera and connect a USB cable to it.
3.Connect the...

20
Starting Projection with Viewer
If the Data Projector is turned on and you are performing the proc edure under “Connecting a Memory 
Device to the Data Projector” (page 18) to connect USB memory  to the Data Projector will cause the 
main Viewer window show n below to be projected.
NoteIf Viewer projection does not  start automatically at this time , perform the following steps to 
select “Viewer” as the input source.
1.Press the [INPUT] key.
 This displays the input source selection screen.
2.Use...