Casio Lk270 Instruction Manual

English
Using Auto Accompaniment
E-39
Playing a chord with your left hand automatically adds bass 
and harmony accompaniment parts to the currently selected 
rhythm. It is just like having your own personal back up group 
on call.
1.Start play of the Auto Accompaniment rhythm 
part.
2.Press bn.
This enables chord input on the accompaniment 
keyboard.
3.Use the accompaniment keyboard to play 
chords.
This will cause bass and harmony Auto Accompaniment 
parts to be added to the rhythm part.
4.Play other...

Using Auto Accompaniment
E-40
■FINGERED 1, 2, and 3
With these three input modes, you finger 3-note or 4-note 
chords on the accompaniment keyboard. Note that with some 
chords, even if you do not finger the third or fifth note, they will 
be played anyway.
●FINGERED 1
Play the component notes of the chord on 
the keyboard.
●FINGERED 2
Unlike FINGERED 1, 6th input is not 
possible. m7 or m7
b5 is input.
●FINGERED 3
Unlike FINGERED 1, allows input of 
fraction chords with the lowest keyboard 
note as the...

English
Using Auto Accompaniment
E-41
Use the following procedures to play intro and ending 
patterns, to play fill-in patterns, and to play variations of basic 
Auto Accompaniment patterns.
■Auto Accompaniment Variation
Each Auto Accompaniment pattern has a basic “normal 
pattern” as well as a “variation pattern”.
1.Press bk.
This starts the variation pattern.
2.Pressing 9 returns to normal pattern.
■Auto Accompaniment Intro
Use the following procedure to play an intro of a few 
measures.
1.Press 8....

Using Auto Accompaniment
E-42
■Using Synchro Start
Use the following procedure to configure the Digital Keyboard 
to start Auto Accompaniment play as soon as you press a 
keyboard key.
1.Press bl.
This enters accompaniment start standby.
2.Play a chord on the keyboard.
This will start full part accompaniment (normal).
Any of the following operations can be performed while in 
synchro standby to start a non-normal pattern.
 To start with intro pattern, press 
8.
 To start with variation pattern play,...

English
Using Auto Accompaniment
E-43
Auto Harmonize automatically adds harmony to notes you 
play with your right hand, which adds rich depth to the melody 
of your performances. You can select from among 12 types of 
Auto Harmonize to suit the type of music you are playing.
 Auto Harmonize is controlled using the same button cr as 
the Arpeggiator (page E-50). Because of this, these two 
functions cannot be used at the same time.
1.Press bn to enable Auto Accompaniment with 
chords (ACCOMP indicator...

E-44
Recording Your Keyboard Play
The recorder feature lets you record your keyboard play.
Use the following procedure to record everything you play on 
the keyboard.
1.Press bq.
2.Press 5.
3.Press 5 again.
This will enter record stnadby.
4.Configure the tone, rhythm, and other settings 
you want to use.
5.Start playing.
Recording starts as soon as you play something on the 
keyboard.
 You can use Auto Accompaniment while playing. If you do, 
Auto Accompaniment also will be recorded.
6.To stop...

English
Recording Your Keyboard Play
E-45
8.Press 5 twice to exit the recorder mode.
 The flashing on the screen shown in step 3 becomes 
faster when remaining recorder memory capacity 
becomes less than 100 notes.
 Total recorder memory capacity is approximately 
12,000 notes. Recording will stop automatically when 
there is no more unused recorder memory remaining.
 Each press of 
5 cycles through the settings shown 
below. You can listen to the recorded data as many 
times as you like by pressing...

Recording Your Keyboard Play
E-46
1.Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under 
“Recording and Playing Back Keyboard Play” (page 
E-44).
2.Press 5.
This will enter record standby.
3.Press a button from ck to co to select the track 
number of the next track to which you want to 
record.
This will enter record standby for the track you selected.
Example:Track 2
 If you want to use a different tone than the one you 
used in Track 1, press 
bp and then use bs...

English
Recording Your Keyboard Play
E-47
You can record up to five songs (numbered 1 through 5) in 
memory. After that, you can select a specific song for 
playback.
1.Press bq.
2.Press 5.
A song number will appear in the upper left corner of the 
display for a few seconds. While it is, use 
bs (10-key) to 
specify the number of the song you want to record or play 
back. The song number will disappear if you do not 
perform any operation.
Example:Song 2
3.Press 5 to record, or bm to play back.
To stop...

Recording Your Keyboard Play
E-48
5.Press bn to cycle through the parts in the 
sequence shown below.
Example:Left-hand part recording
 Configure tone and tempo settings at this time as well.
6.Press bm to start built-in song playback and 
recorder recording.
Play along with the playback.
 To stop recording part way through, press 
bm.
7.Recording will stop automatically when the end 
of the built-in song is reached.
This will enter playback standby.
8.Press bm.
This will start playback of what you...