Casio Lk100 Owners Manual
Have a look at the manual Casio Lk100 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-9662A-E-011A 1 MIC VOLUME slider 2 POWER/MODE selector 3 Power indicator 4 MAIN VOLUME slider 5 DEMO button 6 KEY LIGHT button RHYTHM CONTROLLER 7 SYNCHRO/FILL-IN button 8 START/STOP button 9 TEMPO buttons 0 SONG BANK button A RHYTHM button B TONE button C Percussion instrument list D CHORD root names E SpeakersF 100 SONG BANK list G Display H 50 RHYTHMS list See “Rhythm List” on page A-2 for details. I 100 TONES list See “GM Tone Map List” on page A-1 for details. J Voice 1 to 5 K TRANSPOSE/TUNE/LOCAL CONTROL operation guide L Number buttons 3-STEP LESSON M STEP 1 button N STEP 2 button O STEP 3 button P PART SELECT button Q ONE KEY PLAY buttons R SPEAK button ** Attachment of Score Stand Insert both ends of the music stand provided with the keyboard into the two holes on the top surface. * Rear Panel UVTSWXS MIDI OUT terminal T MIDI IN terminal U SUSTAIN jack V DC 9V jack W PHONES/OUTPUT jack For connection of commercially available headphones. Output from the speakers is automatically cut when headphones are connected. X MIC IN jack
E-10 1Set the POWER/MODE selector to NORMAL. 2Press the SONG BANK button. 3Find the tune you want to play in the Song Bank list, and then use the number buttons to input its two-digit number. •To select “13 TWINKLE TWINKLE LITTLE STAR”, input 1 and then 3. 4Press the STEP 1 button or STEP 2 button. •When you do, the STEP 1 indicator or STEP 2 indicator appears. •The keyboard sounds a count beat and waits for you to play something on the keyboard. The keys that you need to press first flash. •Play in accordance with the fingerings that appear on the display. Quick Reference 662A-E-012A This section provides a quick overview of keyboard operation using steps one and two of the 3-step lesson feature. See page E-21 for detailed explanations of these steps. 5Play the melody part on the keyboard. Play the notes with the ONE KEY PLAY buttons. •The accompaniment tempo automatically adjusts to play along with your melody. Play the notes on the keyboard. •A sub-melody (obbligato) plays in time with the melody. •With Step 1, the correct melody note is played no matter which keyboard key you press. Play the notes on the keyboard, pressing keys as they light. •Keep the key depressed as long as it stays lit. •If you selected any song from number 84 through 99, the lit key goes out as soon as you press it. •The key that corresponds to the next note you need to play will flash. •After you press the correct melody key, accompaniment proceeds to the next note. Tw i n k l e 13 4525 kTw i n l e Fingering SONG BANK indicator appears
E-11 Power Supply 662A-E-013A This keyboard can be powered by current from a standard household wall outlet (using the specified AC adaptor) or by batteries. Always make sure you turn the keyboard off whenever you are not using it. Using batteries Always make sure you turn off the keyboard before loading or replacing batteries. To load batteries 1.Remove the battery compartment cover. 2.Load 6 AA-size batteries into the battery compartment. •Make sure that the positive (+) and negative (–) ends are facing correctly. 3.Insert the tabs on the battery compartment cover into the holes provided and close the cover. ❚ NOTE •The keyboard may not function correctly if you load or replace batteries with power turned on. If this happens, turning the keyboard off and then back on again should return functions back to normal. Important Battery Information The following shows the approximate battery life. Alkaline batteries .................................. 4 hours Manganese batteries .............................. 1 hour The above value is standard battery life at normal temperature, with the keyboard volume at medium setting. Temperature extremes or playing at very loud volume settings can shorten battery life. WARNING Misuse of batteries can cause them to leak, resulting in damage to nearby objects, or to explode, creating the risk of fire and personal injury. Always make sure you observe the following precautions. •Never try to take batteries apart or allow them to become shorted. •Never expose batteries to heat or dispose of them by incineration. •Never mix old batteries with new ones. •Never mix batteries of different types. •Do not charge the batteries. •Make sure the positive (+) and negative (–) ends of the batteries are facing correctly. CAUTION Misuse of batteries can cause them to leak resulting in damage to nearby objects, or to explode, creating the risk of fire and personal injury. Always make sure you observe the following precautions. •Use only batteries that are specified for use with this product. •Remove batteries from the product if you do not plan to use it for a long time. Using the AC Adaptor Make sure that you use only the AC adaptor specified for this keyboard. Specified AC Adaptor: AD-5 Note the following important precautions to avoid damage to the power cord. During Use •Never pull on the cord with excessive force. •Never repeatedly pull on the cord. •Never twist the cord at the base of the plug or connector. •The power cord should not be stretched tight while it is in use. During Movement •Before moving the keyboard, be sure to unplug the AC adaptor from the power outlet. During Storage •Loop and bundle the power cord, but never wind it around the AC adaptor. AC adaptor AD-5 AC outlet DC 9V jack
E-12662A-E-014A IMPORTANT!•Make sure that the keyboard is turned off before connecting or disconnecting the AC adaptor. •Using the AC adaptor for a long time can cause it to become warm to the touch. This is normal and does not indicate malfunction. Auto Power Off When you are using battery power, keyboard power turns off automatically whenever you leave it on without performing any operation for about 6 minutes. When this happens, move the POWER/MODE selector to the OFF position and then back to NORMAL, CASIO CHORD, or FINGERED to turn power back on. ❚ NOTE •Auto Power Off is disabled (it does not function) when you are using the AC adaptor to power the keyboard. Power On Alert Keyboard keys light to alert you if you leave power on and do not perform any operation for about 6 minutes. Note that keys light only, and no sound is produced. When this happens, press any button or keyboard key to clear the power on alert. ❚ NOTE •Power on alert operates only when you are powering the keyboard using the AC adaptor. It does not operate when you are using batteries. To disable Auto Power Off and power on alert Hold down the TONE button while turning on the keyboard to disable Auto Power Off and power on alert. ❚ NOTE •When these functions are turned off, the keyboard does not turn off automatically and no alert is performed no matter how long it is left with no operation being performed. •Auto Power Off and power on alert are enabled again when you manually turn off power and then turn it back on again. Avoid heat, humidity or direct sunlight. Do not overexpose the instrument to direct sunlight, or place it near an air conditioner, or in any extremely hot place. Do not use near a TV or radio. This instrument can cause video or audio interference with TV and radio reception. If this happens, move the instrument away from the TV or radio. Do not use lacquer, thinner or similar chemicals for cleaning. Clean the keyboard with a soft cloth dampened in a weak solution of water and a neutral detergent. Soak the cloth in the solution and squeeze until it is almost dry. ❚ NOTE •You may notice lines in the finish of the case of this keyboard. These lines are a result of the molding process used to shape the plastic of the case. They are not cracks or breaks in the plastic, and are no cause for concern. Care of Your Keyboard
E-13 White RedPIN plug Stereo standard plugAudio connection PHONES/OUTPUT Jack Keyboard amp, guitar amp, etc. 1 LEFTRIGHTAUX IN or similar terminal of audio amplifier2 3 Connections Phones/Output Jack Before connecting headphones or other external equipment, be sure to first turn down the volume settings of the keyboard and the connected equipment. You can then adjust volume to the desired level after connections are complete. [Rear Panel] Connecting Headphones (Figure 1 ) Connecting headphones cuts off output from the keyboard’s built-in speakers, so you can play even late at night without disturbing anyone. Audio Equipment (Figure 2 ) Connect the keyboard to an audio equipment using a commercially available connecting cord with a standard plug on one end and two PIN plugs on the other end. In this configuration, you normally set the input selector of the audio equipment to the terminal (usually marked AUX IN or something similar) where the cord from the keyboard is connected. See the user documentation that comes with your audio equipment for full details. Musical Instrument Amplifier (Figure 3 ) Use a commercially available connecting cord to connect the keyboard to a musical instrument amplifier. ❚ NOTE •Be sure to use a connecting cord that has standard plugs on the ends you connect to the keyboard and amplifier. [Connection Example] Keyboard or guitar amp To keyboard’s PHONES/OUTPUT jackStandard plug INPUT 662A-E-015A Sustain Jack You can connect an optional sustain pedal (SP-3 or SP-20) to the SUSTAIN jack to enable the capabilities described below. Sustain Pedal •With piano tones, depressing the pedal causes notes to linger, much like a piano’s damper pedal. •With organ tones, depressing the pedal causes notes to continue to sound until the pedal is released. Using the Microphone Jack Connecting a commercially available microphone to the MIC IN jack makes it possible to sing along with the keyboard’s built-in tunes or with output from a MIDI device. When connecting a microphone, be sure to first adjust the MIC VOLUME to a relatively low setting, and then adjust to the level you want after connecting. 1.Set the MIC VOLUME slider setting so it is on the “MIN” side. 2.Turn on the microphone’s on/off switch. 3.Use the MIC VOLUME slider to adjust microphone volume to the level you want. [Rear Panel] MIC VOLUME slider Microphone Microphone on/off switch SUSTAIN jack SP-20
E-14662A-E-016A IMPORTANT!•Be sure to use the microphone’s on/off switch to turn off the microphone and to disconnect the microphone from the keyboard whenever you are not using it. Recommended Microphone Type •Dynamic microphone (standard plug) IMPORTANT!•Be sure to disconnect the microphone from the keyboard whenever you are not using it. Howling (Feedback Noise) Any of the following conditions can cause howling (feedback noise). •Covering the head of the microphone with your hand •Positioning the microphone too near to a speaker Should howling occur, try grasping the microphone further away from the head, and move away from any nearby speaker. Static Noise Fluorescent lighting can cause static noise in the microphone signal. When this happens, move away from the lighting you suspect may be causing the static. Accessories and Options Use only the accessories and options specified for this keyboard. Use of non-authorized items creates the danger of fire, electrical shock, and personal injury.
E-15 BASSPIANO PERCUSSION (No.99) •PERCUSSION (Tone 99) assigns 35 percussion sounds and five voice sounds to the keyboard as shown below. The sounds assigned to each key are indicated above the keyboard. 662A-E-017A ❚ NOTE •Always enter two digits for the tone number. If you enter only one digit, the display will automatically return to the previous tone number setting after a few seconds. •If you change the tone setting while a keyboard key is depressed, the tone does not change until you release the key and press a keyboard key again. •With certain tones (such as percussion sounds and sound effects), there may be very little or no change at all in the pitch, no matter which keyboard key you press. •If you input the wrong first digit for a tone number, you can return to the previous setting by pressing the TONE button. Keyboard split tones Some of the preset tones split the keyboard and assign two or more sounds. With such a preset tone, the sound produced depends on what position of the keyboard you play. For example, BASS/PIANO (tone 90) puts BASS on the left and PIANO on the right of the keyboard. BASS/PIANO (No.90) Basic Operations TEMPO DEMO MAIN VOLUME TONE RHYTHM SONG BANKNumber buttons POWER/MODE START/STOP SYNCHRO/FILL-IN This part of the manual provides you with the basic information you need to use your keyboard. To switch power on and off 1.Set the POWER/MODE selector to NORMAL. 2.Press the keyboard keys. 3.Use the MAIN VOLUME slider to set the volume to a relatively low level. 4.To switch power off, set the POWER/MODE selector to OFF position. To change tones 1.Look at the tone list* printed on the keyboard’s console and find the one you want. *See “GM Tone Map List” on page A-1 for details. 2.Press the TONE button. 3.Use the number buttons to input the 2-digit number that identifies the tone you want to select. Example: To select “26 ACOUSTIC BASS”, input 2 and then 6. Gr andPno Indicator appears Ac o . Ba s s
E-16 Other Useful Functions To change the key of the keyboard The transpose feature of this keyboard lets you raise or lower its key in semitone increments. This means you can easily match to suit someone’s voice, and you can eliminate sharps and flats from music making it easier to play. 1.While in any mode besides the Song Bank Mode (indicated when the SONG BANK indicator is lit), hold down the TONE button and press the RHYTHM button. •Perform step 2 within five seconds after performing step 1. 2.Use the TEMPO buttons to change the key of the keyboard. Example: To change the tuning to B (indicated by -1 since it is one tone below C, which is the normal tuning of the keyboard). Trans Trans(–) F#GABCDEF ABC#EKey : : Pressing : Pressing Display : Trans (–)Trans (+ ) B (-1) tuning Normal tuning DFG A B C BC E CDEF GA BC B CDE F GAC 662A-E-018A BASS DRUM SIDE STICK ACOUSTIC SNARE HAND CLAP ELECTRIC SNARE LOW FLOOR TOM CLOSED HI-HAT HIGH FLOOR TOM PEDAL HI-HAT LOW TOM OPEN HI-HAT LOW MID TOM HIGH MID TOM CRASH CYMBAL 1 HIGH TOM RIDE CYMBAL 1 CHINESE CYMBAL RIDE BELL TAMBOURINE SPLASH CYMBALCOWBELL CRASH CYMBAL 2 CLAVES RIDE CYMBAL 2 HIGH BONGO LOW BONGO MUTE HIGH CONGA OPEN HIGH CONGA LOW CONGA HIGH TIMBALES LOW TIMBALES HIGH AGOGO LOW AGOGO CABASA MARACAS VOICE 1 VOICE 2 VOICE 3 VOICE 4 VOICE 5 Polyphony The term polyphony refers to the maximum number of notes you can play at the same time. This keyboard has 12-note polyphony, which includes the notes you play as well as the rhythms and auto-accompaniment patterns that are played by the keyboard. This means that when a rhythm or auto- accompaniment pattern is being played by the keyboard, the number of notes (polyphony) available for keyboard play is reduced. Also note that some of the tones offer only 6-note polyphony. •When rhythm or auto accompaniment is playing, the number of sounds simultaneously played is reduced. •Though you can sound up to 12 notes at one time, only the last four keyboard keys pressed light up.
E-17 ❚ NOTE •If you leave the tuning screen on the display for about five seconds without doing anything, the screen is automatically cleared. •In step 2 of the above procedure, you could also use the number buttons to input a value from 00 to 50. •Pressing both of the TEMPO buttons ( /) at the same time returns the tuning setting to 00. •Pressing the SONG BANK button changes the tuning setting to 00. •The tuning setting does not affect any of Song Bank tunes. •You can tune the keyboard within a range of approximately ±50 cents (100 cents = 1 semitone). •The tuning setting is automatically set to 00 whenever you turn the keyboard on. •Pressing the DEMO button changes the tuning setting to 00. •The tuning operation does not affect rhythm (99 PERCUSSION). Playing the demo tunes You can set up the keyboard to continually play its 100 built- in Song Bank tunes. Keyboard keys light to indicate the melody notes of the demo tune as it plays. To start demo tune play 1.Switch power on and adjust the volume level. 2.Press the DEMO button. •Demo tune play continues in a sequential endless loop until you switch it off. •The number and name of the demo tune currently playing are shown on the display. •You can play along on the keyboard while a demo tune is playing back. 3.You can change the demo tune play being played by pressing the number buttons. •The Song Bank tunes play back in tune number sequence, starting from the one you select. To stop demo tune play Press the DEMO button or START/STOP button again to stop demo tune play. 662A-E-019A ❚ NOTE •If you leave the transpose screen on the display for about five seconds without doing anything, the screen is automatically cleared. •You cannot change the transpose setting while the keyboard is in the Song Bank Mode. •In step 2 of the above operation, you could also use the number buttons 0 to 5 to specify C through F. •Pressing both of the TEMPO buttons ( /) at the same time returns the transpose setting to C(0). •The transpose setting is automatically set to C(0) whenever you turn keyboard power on. •The transpose setting is automatically set to C(0) whenever you press the SONG BANK button. •The pitch of a transposed note depends on the tone you are using. If the transpose operation causes a note to exceed the range of the tone you are using, the same note in the highest octave of the tone’s range is substituted. •The transpose operation does not affect tone number 99 (PERCUSSION) or auto-accompaniment rhythms. •Transposing tones 75 through 79 and 90 through 96 changes the range of keys to which each of the tones is assigned. •The transpose setting is automatically set to C(0) whenever you press the DEMO button. To tune the keyboard A simple operation lets you tune the keyboard to another musical instrument. 1.While in any mode besides the Song Bank Mode (indicated when the SONG BANK indicator is lit), hold down the TONE button and press the SONG BANK button. •Perform step 2 within five seconds after performing step 1. 2.Use the TEMPO buttons to change the tuning of the keyboard. Example:To lower tuning by 20 Tune Tune(–)
E-18 6.Use the TEMPO buttons to adjust the tempo of the rhythm. •Each time you press one of the TEMPO buttons while the tempo value is displayed, the tempo setting changes one step, within the range of 040 to 255. •The initial default tempo setting when you turn on power is 120. •After displaying the current tempo setting by pressing the TEMPO button in step 6, you can also input the tempo setting you want by inputting a three-digit value with the number buttons. •Holding down either of the TEMPO buttons changes the tempo setting at high speed. •To reset the tempo to the standard value of each rhythm, press both TEMPO buttons. 7.To stop rhythm play, press the START/STOP button again. Using auto-accompaniment This keyboard features 50 accompaniment patterns that let you add full accompaniments to your performances automatically. With auto-accompaniment, part of the keyboard is reserved as an accompaniment keyboard. As you play your chords on the accompaniment keyboard, the accompaniment pattern adjusts automatically to follow the progression you play. You get a choice between two different methods for chord play. FINGERED lets you play chords as you normally do, while CASIO CHORD makes it possible to play fully formed chords with one finger. About the accompaniment keyboard The lower (left) 1.5 octaves are reserved for use as an accompaniment keyboard whenever you select CASIO CHORD or FINGERED with the POWER/MODE selector. The panel above the accompaniment keyboard keys is marked with the names of the notes they play. The remainder of the keyboard (the part that is not included in the accompaniment keyboard) is called the melody keyboard. Please be sure to remember these terms, because they will be used throughout the rest of this manual. Accompaniment keyboardMelody keyboard 662A-E-020A The entire keyboard can be used for melody play while the POWER/MODE selector is set to NORMAL.( ) ❚ NOTE •Only the following buttons are enabled while a Song Bank tune is being played. •MAIN VOLUME slider •Number buttons •START/STOP button •POWER/MODE selector (OFF) •DEMO button •KEY LIGHT button •SPEAK button •You cannot change the tone being used for the melody of a Song Bank tune. Playing rhythms This keyboard features a collection of 50 exciting built-in rhythm patterns. Each pattern provides percussion back up for all your performances. To select and play a rhythm 1.Set the POWER/MODE selector to NORMAL. 2.Find the rhythm you want to use in the “Rhythm List” (page A-2) and note its rhythm number. 3.Press the RHYTHM button. •When you do, the RHYTHM indicator appears. •The number and name that appear on the display indicate the currently selected rhythm. 4.Use the number buttons to input the 2-digit rhythm number for the rhythm you want to use. Example: To select “37 SAMBA”, input 3 and then 7. •Be sure to always specify a 2-digit number. •If you discover a mistake before you input the second digit, press the RHYTHM button to return to the previously set rhythm number. •You can change to another rhythm even while the current rhythm is sounding. 5.Press the START/STOP button to start play of the rhythm. •When you do, the selected rhythm starts to sound. Samba