Casio High Speed Exilim Ex Fh25 Users Guide

							
31Quick Start Basics
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can 
result in the image you just shot being sa ved incorrectly, damage to other images 
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly ont o the lens, shade the lens with your hand.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can 
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual 
image will be recorded at the quality set for the image quality setting (page 101).
Shooting Indoors under  Fluorescent Lighting
• Minute flickering of fluorescent lighting  can affect the brightness or color of an 
image.
Other Precautions
• Due to the characteristics of the camera ’s semiconductor, slow shutter speeds can 
cause digital noise in images. The came ra performs an automatic noise reduction 
process whenever the shutter speed is 1 se cond or slower. Storage of images shot 
at slower shutter speeds takes longer bec ause of the time required for noise 
reduction. Do not perform any key operati on while the image storage operation is in 
progress.
• A noise reduction process is performed when  ISO sensitivity is set to a high value. 
This can cause the camera to take relative ly longer to be ready to shoot again after 
you press the shutter button. Do not perform any key operation while the image 
recording operation is in progress.
• Due to the characteristics of the imagi ng element used by the camera, very fast 
moving objects in an image may appear distorted.
Snapshot Shooting Precautions
Downloaded From camera-usermanual.com Casio Manuals 
						

							
32Quick Start Basics
• Any of the following can make proper focus impossible.– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with  a repeating horizontal pattern
– Multiple subjects at varyin g distances from the camera
– Subject in a dark location
– Subject that is too far away for light  from the AF assist light to reach
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly, try using  focus lock (page 54) or Manual Focus (page 
52).
Auto Focus Restrictions
Downloaded From camera-usermanual.com Casio Manuals 
						

							
33Snapshot Tutorial
Snapshot Tutorial
Selecting a Recording Mode
Your camera has a variety of 
different recording modes. Before 
shooting, use the mode dial to 
select the recording mode that suits 
the type of subject you are trying to 
record.
 Flash CS
This mode will record consecutive images while firing the flash. See page 56 for 
details.
 Normal Speed CS/High Speed CS (Prerecord CS)
With Normal Speed CS, the number of  consecutive images you can shoot is 
theoretically unlimited, as long as there is  memory available to store them. Also 
note that the maximum shooting speed of Normal Speed CS is limited by the 
type of memory card you are using and the camera setup. See page 57 for 
details.
With High Speed CS, the camera conti nues to shoot images as long as you 
keep the shutter button depressed, and you can change the shooting speed 
while recording is in progress. You can  record up to 30 images. In this mode, 
half-pressing the shutter button starts continual pre-recording of images to a 
temporary buffer. Then when you press the shutter button the rest of the way 
down, the camera saves the buffer contents and perform real-time continuous 
shutter recording of new images until you release the shutter button. See page 
58 for details. • Note that even if the mode dial is set to  Õ (High Speed CS), High Speed CS 
image recording is not possible while  “Normal Speed CS” is selected for the 
“CS” setting (pages 57, 58).
 Single Shot
Continuous shutter recording is disabl ed when this mode is selected. Each 
press of the shutter button records  a single image. See page 26 for details.
Mode dial
Snapshot Modes
Movie Modes
ª
Õ
t
Downloaded From camera-usermanual.com Casio Manuals 
						

							
34Snapshot Tutorial
IMPORTANT!
• When you use a BEST SHOT scene, the camera’s mode changes in accordance 
with specific setup (Single Shot, Conti nuous Shutter, High Speed Movie, etc.) for 
that scene. The recording mode selected by the mode dial is ignored.
• Due to the characteristics of the imagi ng element used by the camera, very fast 
moving objects in an image may appear distorted.
• Depending on the shutter speed setting and the recording mode you used, the 
brightness of what appears on the monitor screen when you record the image may 
be different from the brightness of the recorded image.
• When recording with some modes, light s ource flicker can cause horizontal bands 
to appear in the image.
 HS
This mode records high speed movies. See page 68 for details.
 HD/STD
This more records HD or standard movies. See page 67 for details.
©
³
Downloaded From camera-usermanual.com Casio Manuals 
						

							
35Snapshot Tutorial
2.Use [8] and [ 2] to select the setting  you want to change.
This will select one of the contro l panel icons and display its settings. *1
3.Use [4] and [ 6] to change the setting.
4.If you want to configure anothe r setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can use on-screen menus to c onfigure settings other than those listed 
above (page 92).
Using the Control Panel
The control panel can be used to configure camera settings.
1.In the REC mode, press [ 8].
1Exposure mode (page 36)
2Image size/Quality *2 (pages 38, 101)
3ISO sensitivity (page 42)
4White balance (page 43)
5EV shift (page 44)
6AF area (page 45)
7Not displayed in this mode
8Flash (page 46)
9Date/Time (page 48)
*1Items displayed in the control panel depend on the recording mode.*2Image quality cannot be changed using the control panel.
[SET]
[8 ] [2 ] [4 ] [6 ]
1
9 5 3
4
7
8 2
6Control panel
Downloaded From camera-usermanual.com Casio Manuals 
						

							
36Snapshot Tutorial
Your camera has a variety of different exposure modes. Before shooting an image, 
select the exposure mode that suits the type of subject you are shooting.
1.In the REC mode, press [8].
2.Use [ 8] and [ 2] to select the top option in  the control panel (Exposure 
mode).
3.Use [ 4] and [ 6] to select the setting you  want and then press [SET].
Selecting the Exposure Mode
Auto
Use this setting for easy image recording.  This is the mode you normally should 
use (page 26).
BEST SHOT
Simply select one of a collection of buil t-in sample scenes and the camera sets 
up automatically for beautiful images every time (page 73).
A A (Aperture Priority) mode
In this mode, you select the aperture and other settings 
are adjusted accordingly.
Use [ 4] and [ 6] to select the desired aperture value.
• The ISO sensitivity, shutter speed and aperture 
value on the monitor screen will turn orange when 
you half-press the shutter button if the image is over-
exposed or under-exposed.
• If you are using manual focus (page 53), you also  can press [SET], select “FOCUS”, and then use [ 4] 
and [ 6] to focus manually.
t
b
Aperture value
Downloaded From camera-usermanual.com Casio Manuals 
						

							
37Snapshot Tutorial
IMPORTANT!
• You may not be able to achieve the brightness you want when shooting an image that is very dark or very bright. If  this happens, use the M mode to adjust the 
aperture or shutter speed manually.
•“ S  Image AS” (page 95) does not work in the S mode and M mode. You can, 
however, turn on “ A
 Camera AS”, if you like.
• While A, S, or M is selected for the ex posure mode, the flash will not fire if > (Auto 
Flash) or  ¥ (Red Eye Reduction) is selected as  the flash mode. If you want the 
flash to fire, select  < (Flash On) as the flash mode.
S S (Shutter Speed Priority) mode
In this mode, you select the shutter speed and other 
settings are adjusted accordingly.
Use [ 4] and [ 6] to select the desired shutter speed.
• The ISO sensitivity, shutter speed and aperture value 
on the monitor screen will turn orange when you half-
press the shutter button if the image is over-exposed 
or under-exposed.
• If you are using manual focus (page 53), you also  can press [SET], select “FOCUS”, and then use [ 4] 
and [ 6] to focus manually.
M M (Manual Exposure) mode
This mode gives you total control over aperture and 
shutter speed settings.
1Press [SET], select the aperture setting, and then 
use [ 4] and [ 6] to change it.
2Press [SET], select the shutter speed setting, and 
then use [ 4] and [ 6] to change it.
• If you are using manual focus (page 53), you also 
can press [SET], select “FOCUS”, and then use [ 4] 
and [ 6] to focus manually.
Shutter speed
Shutter speed
Aperture value
Downloaded From camera-usermanual.com Casio Manuals 
						

							
38Snapshot Tutorial
.Pixels
A digital camera image is a collection of small 
dots called “pixels”. The more pixels there are 
in an image, the more detail there will be. 
However, you generally can do with fewer 
pixels when printing an image (L size) 
through a print service, attaching an image to 
e-mail, when viewing the image on a 
computer, etc.
.About image sizes
The size of an image indicates how many pi xels it contains, and is expressed as 
horizontal pixelsxvertical pixels.
Changing the Image Size (Size)
10M (3648x2736) size image = 
Approximately 10 million pixels
*Unit: pixels
VGA (640x480) size image = 
Approximately 300,000 pixels
Pixel
3648 *
2736*
640*
480*
Downloaded From camera-usermanual.com Casio Manuals 
						

							
39Snapshot Tutorial
Image Size Selection Tips
Note that larger images have more pixels, so they take up more memory space.
• For information about image size, image quality, and number of images that can be  stored, see page 183.
• For information about movie image size, see page 65.
• For information about resizing  existing snapshots, see page 121.
.To select the image size
1.In the REC mode, press [ 8].
2.Use [ 8] and [ 2] to select the second control panel option from the top 
(Image Size).
3.Use [4] and [ 6] to select an image size and then press [SET].
Large Number 
of Pixels More detail, but takes up more memory. Best 
when you plan to print large-size prints (such 
as A3 size).
Small Number 
of Pixels
Less detail, but takes up less memory. Best 
when you want to send images by e-mail, etc.
Downloaded From camera-usermanual.com Casio Manuals 
						

							
40Snapshot Tutorial
Image Size 
(Pixels)Suggested 
Print Size and 
ApplicationDescription
RAW+ RAW+JPEG
(Select when 
you want to 
process image 
data yourself.) Saves the image as both normal JPEG data and 
RAW image data. A 10M size image is stored for 
the JPEG data. RAW image data is unprocessed 
data output by the image sensor and is saved in 
DNG (digital negative) format. Though the image 
of such data is virtually undeteriorated, it cannot 
be viewed on the camera’s monitor screen or 
printed. After transferring RAW image data to your 
computer, you can use software that supports the 
general-purpose DNG format
 to process the image 
and convert it to image data that suits your 
particular needs. Since both RAW image data and 
JPEG data are saved by the camera, you can view 
the JPEG version on the camera’s monitor screen.
10M 
(3648
x2736) Poster Print
Good detail for better clarity even for images 
cropped (page 122) from the original
3:2 
(3648
x2432)
Poster Print
16:9 
(3648
x2048) HDTV
9M 
(3456
x2592) A3 Print
Good detail
7M 
(3072
x2304) A3 Print
4M 
(2304
x1728) A4 Print
2M 
(1600
x1200) 3.5x5 Print Best when preserving memory capacity is 
relatively more important than image quality.
VGA 
(640
x480) E Mail Image files are smaller, which is better when 
attaching images to e-mail. However, images are 
relatively coarser.
Downloaded From camera-usermanual.com Casio Manuals