Casio High Speed Exilim Ex Fh25 Users Guide

							
121Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Rotation
1.Use [ 8] and [ 2] to select “Rotation”  and then press [SET].
Each press of [SET] will rotate  the displayed image 90 degrees left.
2.When the displayed image is at  the orientation you want, press 
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You 
cannot rotate individual component image in a CS group.
• Rotation of movie images is not supported.
• Note that this procedure does not actual ly change the image data. It simply alters 
how the image is displayed on  the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of t he image will be displayed on the image menu 
screen.
Procedure
[ p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You  can resize an image to one of three sizes: 
5M, 2M, VGA. • Resizing a 3:2 or 16:9 size snapshot will  create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the  recording date of the original snapshot.
Rotating an Image (Rotation)
Resizing a Snapshot (Resize)
Downloaded From camera-usermanual.com Casio Manuals 
						

							
122Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Trimming
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots or movies  you recorded with this camera.
Cropping a Snapshot (Trimming)
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original 
snapshot is also retained.
Use the zoom controller to zoom the image to the size you 
want, use [8], [ 2], [ 4], and [ 6] to display the portion of 
the image you want to cut out, and then press [SET]. • The image produced by cropping a 3:2 or 16:9 image 
will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the  same as the recording date of the original snapshot.
Copying Files (Copy)
Built-in  * 
Card Copies all files from built-in ca
mera memory to a memory card.
This option copies all the files in  built-in camera memory. It cannot 
be used to copy a single file.
Card  * 
Built-in Copies a single file on the memory card to camera built-in camera 
memory. Files are copied to the folder in built-in memory whose 
name has the largest serial number.
• You cannot copy a continuous shutter (CS) group image (page 
108).
1Use [ 4] and [ 6] to select the file you want to copy.
2Use [ 8] and [ 2] to select “Copy” and then press [SET].
Represents
snapshot area
Part of snapshot that is currently displayed
Zoom factor
Downloaded From camera-usermanual.com Casio Manuals 
						

							
123Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Divide Group
See page 107 for details.
Procedure
[p ] (PLAY)  * Display CS group.  * [MENU]  * PLAY Tab  * 
CS Multi Print
1.Use [ 8] and [ 2] to select “Create”.
• You can use [ 4] and [ 6] to select a different CS group, if you want.
2.Press [SET].
This converts the CS group to a 10M (3648x2736) image with up to 30 CS 
frames (5 vertical x 6 horizontal).
• This camera may not be able to correctly convert a CS group image with  another camera.
• The recording date of the converted image will be the same as the recording 
date of the original CS group.
• When converting a CS group whose images have been rotated by the  “Rotation” or “Auto Rotate” feature to a CS Multi Print image, the arrangement 
of the images in the CS Multi Print will be different from that of normal 
(unrotated) CS images.
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * CS Frame Edit
See the following pages for details.
DPOF Printing: page 128
Protect: page 119
Copy: page 108
Delete: page 106
Dividing Up a Continuous Shutter Group (Divide Group)
Combining CS Images into a Single Still Image 
(CS Multi Print)
Editing a CS Image (CS Frame Edit)
Downloaded From camera-usermanual.com Casio Manuals 
						

							
124Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 127).
You can connect the camera directly to a  printer that supports PictBridge and print 
images without going through a computer.
. To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want 
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print 
images directly from a memory ca rd. For details, see the user 
documentation that comes with your printer.
Connecting Directly to a  PictBridge Compatible 
Printer
You can print on a printer that supports PictBridge (page 
124).
Printing with a Computer
After transferring the images to your computer, use 
commercially available software to print.
Connecting Directly to a PictBridge Compatible Printer
Downloaded From camera-usermanual.com Casio Manuals 
						

							
125Printing
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [ 8] and [ 2] to select “PTP (PictBridg e)”, and then press [SET].
.Connecting the Came ra to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.
• The camera does not draw power over the USB cable. Check the battery level  before connecting and make sure it is not too low.
• Make sure that you insert the cable connecto r into the USB/AV port until you feel it 
click securely into place. Failure to inse rt the connector fully can result in poor 
communication or malfunction.
• Note that even while the connector is  fully inserted, you still will be 
able to see the metal part of the connector as shown in the 
illustration.
• When connecting the USB cable to a USB port, make sure you  align the connector correctly with the port.
• Make sure that the camera is turned off  before plugging in or unplugging the cable. 
Check the user documentation that comes with the printer for information about 
requirements before plugging into or unplugging from the printer.
USB
USB cable
USB port USB/AV port
Making sure that the  6 mark on the camera is 
aligned with the  4 mark of the USB cable 
connector, connect the cable to the camera.
Large 
connector
Small connector
Terminal cover
Downloaded From camera-usermanual.com Casio Manuals 
						

							
126Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [ 8] and [ 2] to select “Paper Size”, and then press [ 6].
4.Use [ 8] and [ 2] to select a paper si ze and then press [SET].
• The following are the  available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints usi ng a paper size selected on the printer.
• See the documentation that comes with your printer for information about  paper settings.
5.Use [ 8] and [ 2] to specify the print option you want.
• To toggle date stamping on and off, press [BS]. The date stamp will be printed 
when “On” is indicated on the monitor screen.
6.Use [ 8] and [ 2] to select “Print”  and then press [SET].
Printing will start and the message “Bu sy... Please wait...” will appear on the 
monitor screen. The message will disappear after a short while, even though 
printing is still being performed. Pr essing any camera button will cause the 
printing status to re-appear. The print menu screen will re-appear when printing is 
complete. • If you selected “1 Image”, you can repeat the procedure from step 5, if you 
want.
7.After printing is complete, turn off the camera and disconnect the USB 
cable from the printer and camera.
1 Image : Prints one image. Select and then press [SET]. Next, use [ 4] 
and [ 6] to select the image you want to print.
DPOF Printing : Prints multiple images. Select and then press [SET]. With this  option, images will be printed in accordance with DPOF settings 
(page 127).
Downloaded From camera-usermanual.com Casio Manuals 
						

							
127Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings,  you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service. • Whether or not you will be able to use  DPOF settings for printing depends on the 
printer you are using.
• Some professional print serv ices may not support DPOF.
.Configuring DPOF Settings Individually for Each Image
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing  * Select images
1.Use [ 4] and [ 6] to scroll through the files until the image you want to 
print is displayed.
2.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for  date stamping.
• Repeat steps 1 and 2 to configure setti ngs for other images, if you want.
3.Press [SET].
Using DPOF to Specify Images to be Printed and the Number 
of Copies
Downloaded From camera-usermanual.com Casio Manuals 
						

							
128Printing
.Configuring the Same DPOF  Settings for All the Images
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing  * All images
1.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• Note that the specified number of copies  will be printed for all of the images in 
any CS group included with the images.
• If you want to include the date in the images, press [BS] so “On” is shown for  date stamping.
2.Press [SET].
NOTE
• You can specify the number of copies for  a specific image (page 128) or for all of 
the images in a CS group (page 129) by  performing the above procedure while an 
image in the group is displayed.
. To specify the number of copies for a specific image in a CS group
1.While CS image playback is in progre ss or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [ 8] and [ 2] to select “DPOF Printing” and then press [SET].
3.Use [ 8] and [ 2] to select “Select imag es” and then press [SET].
4.Use [4] and [ 6] to scroll through images until one you want to print is 
displayed.
5.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] to select “On” for date 
stamping.
• Repeat steps 4 and 5 to configure setti ngs for other images, if you want.
6.Press [SET].
Downloaded From camera-usermanual.com Casio Manuals 
						

							
129Printing
.To configure the same DPOF settings for all the images in a CS 
group
1.While CS image playback is in progre ss or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [ 8] and [ 2] to select “DPOF Printing” and then press [SET].
3.Use [ 8] and [ 2] to select “Frame all”  and then press [SET].
4.Use [8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] to select “On” for date  stamping.
5.Press [SET].
DPOF settings are not cleared automati cally after printing is complete.
The next DPOF print operation you execute  will be performed using the last DPOF 
settings you configured for the images. To cl ear DPOF settings, specify “00” for the 
number of copies of all images.
Tell your print service ab out your DPOF settings!
If you take a memory card to a professional pr int service, be sure to tell them that it 
includes DPOF settings for the images to  be printed and the number of copies. If you 
don’t, the print service may print all the images without regard to your DPOF settings, 
or they may ignore your date stamp setting.
Downloaded From camera-usermanual.com Casio Manuals 
						

							
130Printing
.Date Stamping
You can use one of the following three methods to include the recording date in the 
printout of an image.
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA). You can connect the camera directly to a printer that supports 
PictBridge, and perform image selection and printing using the 
camera monitor screen and controls.
• PRINT Image Matching  III
Using image editing software and printing on a printer that supports 
PRINT Image Matching  III makes it possible to use information about 
shooting conditions that is recorded with the image, and produce 
exactly the type of image you want. PRINT Image Matching and 
PRINT Image Matching  III are trademarks of Seiko Epson Corporation.
•Exif Print Printing on a printer that supports Exif Print (Exif 2.2) uses 
information about shooting conditions recorded with the image to 
enhance printed image quality. Contact your printer manufacturer 
for information about models that support Exif Print, printer upgrades, etc.
Configuring camera settings
Configure DPOF settings (page 127).
You can turn date stamping on and off  each time you print. You can configure 
settings so some images include the date stamp and some don’t.
Configure the Camera’s Timestamp setting (page 151). • The camera’s Timestamp setting imprints the date into a snapshot when you 
shoot it, so the date is always in cluded when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date  stamped with the camera’s Timestamp function. Doing so can cause the two 
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date 
stamp images.
Professional print service
Request date stamping when ordering prints  from a professional print service.
Downloaded From camera-usermanual.com Casio Manuals