Casio Exilim Ex Z30 Users Guide

91
OTHER RECORDING FUNCTIONS
1.In the REC mode, press [MENU].
2.Select the “Memory” tab, select the item you
want to change, and then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off
 IMPORTANT! 
• Note that BESTSHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the...

92
PLAYBACKPLAYBACK
2.Use [
] (forward) or [] (back) to scroll
through files on the monitor screen.
 NOTES 
• Holding down [] or [
] scrolls images at high
speed.
• In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower
quality than the actual display image. The actual
display image appears a short while after the preview
image. This does not apply to images copied from
another digital camera.
You can...

93
PLAYBACK
Playing an Audio Snapshot
Perform the steps below to display an audio snapshot
(indicated by a  indicator) and play its audio.
1.In the PLAY mode, use [] and [
] until the
image you want is displayed.
2.Press [SET].
• This plays back the
audio that accompanies
the displayed image.
• You can perform the
following operations
while audio is playing.
 IMPORTANT! 
• Audio volume can be adjusted only when playback is
being performed or is paused.
To do this:
Fast forward or fast reverse
the audio...

94
PLAYBACK
[SET]
Shutter release button
Flipping the Display
The following procedure flips the image 180 degrees. This
comes in handy when you want to show someone standing
in front of you an image on the monitor screen.
1.In the PLAY mode, use [] and [
] to scroll
through images on the monitor screen and
display the one you want.
2.While holding down the shutter release
button, press [SET].
• This flips the image 180 degrees. The histogram or
any other display information you had displayed is
cleared...

95
PLAYBACK
Zooming the Display Image
Perform the following procedure to zoom the image
currently on the monitor screen up to four times its normal
size.
1.In the PLAY mode, use [] and [
] to display
the image you want.
2.Press the zoom
button (
) to enlarge
the image.
• This displays an
indicator that shows the
current zoom factor.
• You can toggle between
the zoomed image and
normal image by
pressing [MENU].
Current zoom factor
3.Use [], [], [], and [
] to shift the image
up, down, left, or right....

96
PLAYBACK
Resizing an Image
You can use the following procedure to change a snapshot
image to either SXGA size (1280 x 960 pixels) or VGA size
(640 x 480 pixels).
• VGA is the optimum image size for attachment to e-mail
messages or incorporation into Web pages.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY”
tab, select “Resize”,
and then press [
].
3.Use [] and [
] to scroll through images and
display the one you want to resize.
4.Use [] and [] to select the setting you
want, and then press...

97
PLAYBACK
Cropping an Image
Use the following procedure when you want to crop a
portion of an enlarged image and use the remaining part of
the image as an e-mail attachment, Web page image, etc.
1.In the PLAY mode, use [] and [
] to scroll
through images and display the one you want
to crop.
2.Press [MENU].
3.Select the “PLAY”
tab, select
“Trimming”, and then
press [
].
• This causes a cropping
boundary to appear.
4.Use the zoom button ( ) to make the
cropping boundary larger or smaller.
• The size of...

98
PLAYBACK
 IMPORTANT! 
• Cropping an image creates a new file that contains
the cropped image. The file with the original image
also remains in memory.
• An image recorded using the 2048 x 1360 (3:2) pixel
size (EX-Z30) and the 2304 x 1536 (3:2) pixel size
(EX-Z40) cannot be cropped.
• Movie and voice recording file images cannot be
cropped.
• An image recorded using another camera model
cannot be cropped.
• If the message “This function is not supported for this
file.” appears, it means that the...

99
PLAYBACK
Playing a Movie
Use the following procedure to play back a movie that was
recorded in the movie mode.
1.In the PLAY mode,
press [] and [
] to
scroll through images
until the movie you
want to play is
displayed.
2.Press [SET].
• This start playback of the movie.
• You can perform the following operations while a
movie is playing.
Movie icon
 IMPORTANT! 
• You cannot repeat play a movie. To play a movie
more than once, repeat the steps of the above
procedure.
• This camera can also play back...

100
PLAYBACK
Displaying the 9-image View
The following procedure displays nine images on the
monitor screen at the same time.
1.In the PLAY mode, press the zoom button
(
).
• This displays the 9-image screen with the image that
was on the monitor screen in step 2 in the center,
with a selection boundary around it.
•
 is displayed in the 9-image screen to indicate
voice recording file images (page 111).
• When there are nine or fewer images, they are
displayed in order with Image 1 in the upper left...