Casio Exilim Ex S500 Users Guide

GETTING READY
41

 USB Cradle and AC Adaptor Precautions
Never use an electrical outlet whose voltage
is outside the rating marked on the AC
adaptor. Doing so can create the risk of fire or
electric shock. Use only the AC adaptor
bundled with this camera.
Do not allow the AC adaptor cord to become
cut or damaged, do not place heavy objects
on it, and keep it away from heat. A damaged
power cord creates the risk of fire and electric
shock.
Never try to modify the AC adaptor cord, or
subject it to...

GETTING READY
42
Turning the Camera On and Off

To turn on the camera
Press the power button, [] (REC) or [] (PLAY). The
operation lamp will light green momentarily, and then
power will turn on. The mode the camera enters depends
on which button you pressed to turn it on.
Press this button to turn on the camera:
Power button or [] (REC)
[
] (PLAY) To enter this mode at
startup:
REC
PLAY
Power button Operation lamp
[] (REC)
Use the AC adaptor where it will not be
splashed with water. Water creates the...

GETTING READY
43

To turn off the camera
Press the power button to turn off the camera.
 NOTE 
You can setup the camera so it does not turn on
when you press [] (REC) or [] (PLAY), or to
turn off when you press [] (REC) or [] (PLAY).
For details, see “Configuring [] (REC) and []
(PLAY) Power On/Off Functions” on page 161.
 NOTE 
Pressing [] (REC) to turn on the camera enters
the REC mode, while pressing [] (PLAY) enters
the PLAY mode.
Pressing [
] (PLAY) while in the REC mode
switches to the PLAY...

GETTING READY
44
To configure this feature: Select this setting:
Sleep Sleep
Auto Power Off Auto Power Off
Configuring Power Saving Settings
You can configure the settings described below to
conserve battery power.
Sleep : Automatically turns off the monitor
screen if no operation is performed for a
specified amount of time in the REC
mode. Performing any button operation
causes the monitor screen to turn back
on.
Auto Power Off : Turns off power if you do not perform
any operation for a specified amount...

GETTING READY
45
Using the On-screen Menus
Pressing [MENU] displays menus on the monitor screen
that you can use to perform various operations. The menu
that appears depends on whether you are in the REC
mode or the PLAY mode. The following shows an example
menu procedure in the REC mode.
1.Press the power
button or [
] (REC).
If you want to enter the
PLAY mode instead,
press [
] (PLAY).
Power button
The Auto Power Off and Sleep features are disabled
in the following cases.
—When the camera is...

GETTING READY
46
Menu Screen Operations
When you want to do this:
Move between tabs
Move from the tab to the
settings
Move from the settings to
the tab
Move between the settings
Display the options
available for a setting
Select an option
Apply the setting and exit
the menu screen
Apply the setting and
return to tab selection
Exit the menu screen
Do this:
Press [
] and [].
Press [].
Press [].
Press [] and [].
Press [] or press [SET].
Press [] and [].
Press [SET].
Press [
].
Press [MENU]....

GETTING READY
47
6.Perform one of the following operations to
apply the setting you configured.
See “Menu Reference” on page 217 for more
information about menus.
To do this:
Apply the setting and exit
the menu screen.
Apply the setting and
return to feature selection
in step 4.
Apply the setting and
return to tab selection in
step 3.
Perform this key operation:
Press [SET].
Press [
].
1. Press [
].
2. Use [] to move back up to
tab selection.
3.Press [
] or [] to select the tab you want,
and then...

GETTING READY
48
• A built-in backup battery retains the date and time
settings of the camera for about 24 hours if the
camera is not supplied with power. Date and time
settings will be cleared when the backup battery
goes dead. The following are the conditions when
power is not being supplied to the camera.
— When the rechargeable battery is dead or
removed from the camera
— When power is not being supplied to the camera
from the USB cradle while the rechargeable
battery is dead or removed from the...

GETTING READY
49
3.Use [], [], [
], and
[] to select the
geographical area
where you live, and
then press [SET].
4.Use [] and [] to
select the name of the
city where you live,
and then press [SET].
5.Use [] and [] to select the summer time
(DST) setting you want, and then press [SET].
When you want to do this:
Keep time using summer time
(Daylight Saving Time)
Keep time using standard time
Select this setting:
On
Off
To configure display language and clock
settings
1.Press the power button, []...

GETTING READY
50
8.Press [SET] to register the settings and exit
the setting screen.
To do this:
Change the setting at the current
cursor location
Move the cursor between settings
Toggle between 12-hour and 24-
hour timekeeping
Do this:
Press [] and [].
Press [
] and [].
Press [BS].
7.Set the current date
and the time.6.Use [] and [] to
select the date format
setting you want, and
then press [SET].
Example: December 24, 2005
Select this format:
YY/MM/DD
DD/MM/YY
MM/DD/YY
To display the date like...