Casio Exilim EX S500 User Manual

141
PLAYBACK
 IMPORTANT! 
• Take care that you do
not block the
microphone with your
fingers.
• Good recording results
are not possible when
the camera is too far
from the subject.
• The 
 (Audio) icon appears on the monitor screen
after audio recording is complete.
• You will not be able to record audio when remaining
memory capacity is low.
• You cannot add audio to the following types of
images.
— Movie images
— Images created with MOTION PRINT
— Protected snapshot (page 148)
• Audio that is...

142
PLAYBACK
 IMPORTANT! 
• Audio volume can be adjusted only when playback is
being performed or is paused.
• If your recording has index marks (page 104) inside
it, you can jump to the index mark before or after the
current playback location by pausing playback and
then pressing [] or [
]. Next, press [SET] to
resume playback from the index mark position.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Toggle monitor screenindicators on and off...

143
PLAYBACK
AV cable
[AV OUT] (AV output port)
Video input terminal
TV
2.Turn off the camera.
3.Set the camera onto the USB cradle.
4.Turn on the TV and select its video input
mode.
5.Press [] to turn on the camera, and then
perform the required operation for playback.
 IMPORTANT! 
• Make sure that “Power On” or “Power On/Off” is
selected for the camera’s power on/off functions
(page 161) when you connect to a TV to view
images.
• All icons and indicators that appear on the monitor
screen also appear on...

144
PLAYBACK
Selecting the Video Output System
You can select either NTSC or PAL for the video system to
match the system of the TV you are using.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Video Out”,
and then press [
].
3.Use [] and [] to select the setting you
want, and then press [SET].
If you are using a TV designedfor use in this area:
U.S., Japan, and other areas
that use the NTSC system
Europe and other areas that
use the PAL systemSelect this...

DELETING FILES
145
DELETING FILES
You can delete a single file, or you can delete all files
currently in memory.
 IMPORTANT! 
•Note that file deletion cannot be undone. Once you
delete a file, it is gone. Make sure you really do not
need a file anymore before you delete it. Especially
when deleting all files, make sure you check all the
files you have stored before proceeding.
•A protected file cannot be deleted. To delete a
protected file, unprotect it first (page 148).
•Delete cannot be performed when...

DELETING FILES
146
Deleting All Files
1.In the PLAY mode, press [] ( ).
2.Use [] and [] to select “All Files Delete”,
and then press [SET].
3.Use [] and [] to select “Yes”.
•To exit the file delete operation without deleting
anything, select “No”.
4.Press [SET] to delete all the files.
•The message “There are no files.” appears on the
screen after all of the files are deleted.
Downloaded From camera-usermanual.com Casio Manuals 

FILE MANAGEMENT
147
FILE MANAGEMENT
The file management capabilities of the camera make it
easy to keep track of images. You can protect files against
deletion and store the files you want in the camera’s built-in
memory.
Folders
Your camera automatically creates folders in its built-in
memory or on the memory card.
Memory Folders and Files
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names are...

FILE MANAGEMENT
148
4.Use [] and [] to
select “On”, and then
press [SET].
•A file that is protected is
indicated by the 
mark.
•To unprotect a file, select
“Off” in step 4, and then
press [SET].
5.Press [MENU] to exit the menu screen.
Protecting Files
Once you protect a file it cannot be deleted (page 145).
You can protect files individually or you can protect all files
in memory with a single operation.
 IMPORTANT! 
•Even if a file is protected, it still will be deleted by a
memory card format...

FILE MANAGEMENT
149
To protect all files in memory
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Protect”, and
then press [].
3.Use [] and [] to select “All Files : On”, and
then press [SET].
•To unprotect all files, press [SET] in step 3 so the
setting shows “All Files : Off”.
4.Press [MENU] to exit the menu screen.
Using the FAVORITE Folder
You can copy scenery shots, photos of your family, or other
special images from a file storage folder (page 195) to the
FAVORITE folder in...

FILE MANAGEMENT
150
3.Use [] and [] to
select “Save”, and
then press [SET].
•This displays the names
of the files in built-in
memory or on the loaded
memory card.
4.Use [
] and [] to select the file you want to
copy to the FAVORITE folder.
5.Use [] and [] to select “Save”, and then
press [SET].
•This copies the displayed file to the FAVORITE
folder.
6.After copying all of the files you want, use []
and [] to select “Cancel”, and then press
[SET] to exit.
 NOTE 
•Copying an image file with the...