Casio Exilim EX S500 User Manual

131
PLAYBACK
5.Use [] and [
] to display the frame that you
want to use as the main image.
• Holding down either button scrolls at high speed.
6.After selecting the
frame you want, press
[SET].
• This displays the
resulting still image.
• If you selected “9
frames” for the layout,
the frame you selected
in step 4 will be the
main image, and the
frames on either side of
it will be used as the
background frames.
• If you selected “1 frame” in step 4, an image of the
frame you selected in step 6 appears...

132
PLAYBACK
2.Use [], [], [], and
[
] to move the
selection boundary to
the image you want.
Pressing [
] while the
selection boundary is
in the right column or
[] while it is in the left
column scrolls to the
next full screen of nine
images.
Example: When there are 20 images in memory, and
Image 1 is displayed first
Selection boundary
23 17 18 19
20 1 2 
345678
91011
12 13 1415 16 17
18 19 20
1
3.Pressing any button besides [], [], [], or
[
] displays the full-size version of the image
where the...

133
PLAYBACK
2.Use [], [], [], and [
] to move the
selection boundary to the date you want, and
then press [SET].
• This displays an image of the first file that was
recorded on the selected date.
Playing a Slideshow
A slideshow automatically plays back images in sequence
at a fixed interval.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Slideshow”,
and then press [
].
Downloaded From camera-usermanual.com Casio Manuals 

134
PLAYBACK
3.Use the screen that appears to configure the
image, time, interval, and effect settings.
Images
Time
Interval• All Images
Displays all images in camera memory.
•
 OnIy
This icon appears only in the case of
snapshots and audio snapshots.
•
 OnIy
This icon appears only in the case of movies.
• One Image
Displays a particular image.
• Favorites
Displays all images in the FAVORITE folder.
Use [] and [
] to specify the playback time you
want (1 to 5 minutes, or 10, 15, 30, or 60
minutes).
Use...

135
PLAYBACK
 IMPORTANT! 
• Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button
operation, or hold down the button until the image
stops.
• Pressing [] during a slideshow will scroll to the
previous image, while [
] scrolls to the next image.
• When the slideshow comes to a movie file, it plays
the movie and its audio once.
• When the slideshow comes to a voice recording file
or an audio snapshot, it...

136
PLAYBACK
Using the Photo Stand Feature
The “Photo Stand” feature lets you specify what should
appear on the camera’s monitor screen while the camera is
on its USB cradle. You can play a Photo Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. See page 133 for information about configuring
slideshow settings to suit your needs.
1.Turn off the camera.
2.Set...

137
PLAYBACK
Rotating the Display Image
Use the following procedure to rotate the image 90 degrees
and register the rotation information along with the image.
After you do this, the image is always displayed in its
rotated orientation.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Rotation”, and
then press [
].
• Note that this operation is possible only when a
snapshot image is on the monitor screen.
3.Use [] and [
] to scroll through images until
the one you want to rotate is on...

138
PLAYBACK
 IMPORTANT! 
• You cannot rotate an image that is protected. To
rotate such an image, first unprotect it.
• You may not be able to rotate a digital image that
was recorded with another type of digital camera.
• You cannot rotate the following types of images.
— Movie images and the voice recording file icon
— Zoomed images
— Images created with MOTION PRINT
• Image rotation is supported for single image only.
You cannot rotate a 9-image screen or an image on
the calendar screen.Using Image...

139
PLAYBACK
 IMPORTANT! 
• Image Roulette does not play movie files or display
the voice recording file icon.
• Image Roulette is disabled when there is only one
snapshot image available.
• If an image you have rotated appears during Image
Roulette, the unrotated version is displayed (page
137).
• Note that Image Roulette works only with images
recorded with this camera. Image Roulette may not
operate properly when other types of images are in
memory.
• If you do not start another Image Roulette...

140
PLAYBACK
1.In the PLAY mode, use [] and [
] to scroll
through snapshots until the one to which you
want to add audio is displayed.
2.Press [MENU].
3.Select the “PLAY”
tab, select “Dubbing”,
and then press [
].
4.Press the shutter button to start audio
recording.
5.Recording stops after about 30 seconds or
when you press the shutter button.
To re-record audio
1.In the PLAY mode, use [] and [
] to scroll
through snapshots until the one whose audio
you want to re-record is displayed.
2.Press [MENU]....