Casio Exilim Ex Fh100 Users Guide

141Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a 
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and 
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a 
computer and view 
them there• Save images and view them manually 
(USB connection) (pages 143, 152).
• Transfer images...

142Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are 
running and what you want to do.
*YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of 
Windows OS.
Using the Camera with a Windows Computer
When you want to 
do this:Operating System 
VersionInstall this software:See 
page:
Save images to a 
computer and view 
them there manuallyWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000Installation not...

143Using the Camera with a Computer
.Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the 
“Read me” file that comes with each application for details. Information about 
computer system requirements also can be found under “Computer System 
Requirements for Bundled Software” on page 184 of this manual.
.Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to 
run.
•...

144Using the Camera with a Computer
4.Turn off the camera and then use the USB cable that comes with the 
camera to connect it to your computer.
• The camera does not draw power over the USB cable. Check the battery level 
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the...

145Using the Camera with a Computer
7.Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in 
memory if there is no card) as a removable disk.
8.Right-click the “DCIM” folder.
9.On the shortcut menu that appears, click “Copy”.
10.Windows 7 / Windows Vista users: Click “Start” and then 
“Documents”.
Windows XP users: Click “Start” and then “My Documents”.
Windows 2000 users: Doubleclick “My Documents” to open it.
• If you already have a “DCIM” folder in...

146Using the Camera with a Computer
.To view images you copied to your computer
1.Double-click the copied “DCIM” folder to open it.
2.Double-click the folder that contains the images you want to view.
3.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 159.
• An image that was rotated on the camera will be displayed on your computer 
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually...

147Using the Camera with a Computer
Windows Media Player, which is already installed on most computers, can be used 
for movie playback. To play back a movie, first copy the movie to your computer and 
then double-click the movie file.
.Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back 
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these 
environments does...

148Using the Camera with a Computer
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your 
camera simplifies uploading of movie files you recorded with the “For YouTube” 
scene to YouTube.
.What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload 
movies and view movies uploaded by others.
.To install YouTube Uploader for CASIO
1.On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.
2.After reading the information about installation...

149Using the Camera with a Computer
5.The left side of the display will have an area for inputting a title, 
category, and other information required for uploading to YouTube. 
Enter the required information.
6.The right side of the display shows a list of movie files in camera 
memory. Select the check box next to the movie file you want to 
upload.
7.When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button...

150Using the Camera with a Computer
If you want to transfer images from your computer to the camera, install Photo 
Transport on your computer from the CD-ROM that comes with the camera.
.To install Photo Transport
1.On the CD-ROM menu screen, select “Photo Transport”.
2.After reading the information about installation conditions and system 
requirements for installation in the “Read me” file, install Photo 
Transport.
.To transfer images to the camera
1.Connect the camera to your computer (page 143)....