Casio Exilim Card Ex S600 Users Guide

OTHER SETTINGS
161
To set the current time and date
1.Press [MENU].
2.Select the “Set Up” tab, select “Adjust”, and
then press [].
3.Set the current date and the time.
4.When all the settings are the way you want,
press [SET] to register them and exit the
setting screen.
Changing the Date Format
You can select from among three different formats for
display of the date.
1.Press [MENU].
2.Select the “Set Up” tab, select “Date Style”,
and then press [].
3.Use [
] and [] to change the setting, and
then...

OTHER SETTINGS
162
Using World Time
You can use the World Time screen to select a time zone
and instantly change the time setting of the camera’s clock
when you go on a trip, etc. World Time lets you select one
of 162 cities in 32 time zones.
To display the World Time screen
1.Press [MENU].
2.Select the “Set Up” tab, select “World Time”,
and then press [].
3.Use [
] and [] to select “World”.
Select this:
Home
World
To do this:
Display the time in your home time zone
Display the time in the zone...

OTHER SETTINGS
163
5.Use [
], [], [], and
[] to select the
geographical area you
want, and then press
[SET].
6.Use [
] and [] to select the city you want,
and then press [SET].
7.When the setting is the way you want, press
[SET] to apply it and exit the setting screen.
Editing the Date and Time of an Image
Use the procedure in this section to change the date and
time of a previously recorded image. This capability comes
in handy when the current date and time are wrong due to
the following reasons....

OTHER SETTINGS
164
Changing the Display Language
You can use the following procedure to select one of ten
languages as the display language.
1.Press [MENU].
2.Select the “Set Up” tab, select “Language”,
and then press [
].
3.Use [], [], [], and [
] to change the
setting, and then press [SET].
Do this:
Press [] or [].
Press [] or [
].
Press [BS].
To do this:
Change the value at the cursor
location
Move the cursor between settings
Toggle between 12-hour and 24-
hour timekeeping
5.When all the...

OTHER SETTINGS
165
Changing the Brightness of the Monitor
Screen
You can use the following procedure to toggle the
brightness of the monitor screen between two levels.
1.Press [MENU].
2.Select the “Set Up” tab, select “Screen”, and
then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
Select this setting:
Auto
Normal
Bright
To do this:
Have the camera detect
surrounding conditions and set
monitor screen brightness
accordingly
Select normal brightness
Select high...

OTHER SETTINGS
166
•Mass Storage (USB DIRECT-PRINT) causes the camera
to see the computer as an external storage device. Use
this setting for normal transfer of images from the camera
to a computer (using the bundled Photo Loader
application).
•PTP (PictBridge) simplifies the transfer of image data to
the connected device.Configuring [] (REC) and [] (PLAY)
Power On/Off Functions
You can use the following procedures to configure []
(REC) and [] (PLAY) so power turns and/or off
whenever they are pressed....

OTHER SETTINGS
167
Select this setting:
Power On
Power On/Off
Disable
To configure this operation:
Power turns on when [
] (REC) or
[] (PLAY) is pressed (but does notturn off)
Power turns on or off when [
](REC) or [] (PLAY) is pressed
Power does not turn on or off when
[
] (REC) or [] (PLAY) is
pressed
 IMPORTANT! 
•When “Power On/Off” is selected, pressing []
(REC) in the REC mode or [] (PLAY) in the PLAY
mode turns off the camera.
•Pressing [
] (REC) in the PLAY mode switches to
the currently selected...

OTHER SETTINGS
168
1.Check to make sure there is no memory card
loaded in the camera.
•If there is a memory card loaded in the camera,
remove it (page 171).
2.Press [MENU].
3.Select the “Set Up” tab, select “Format”, and
then press [].
4.Use [
] and [] to select “Format”, and then
press [SET]. Entering the PLAY mode after
formatting built-in memory will cause the
message “There are no files.” to appear.
•To exit the format operation without formatting,
select “Cancel”.
Downloaded From...

USING A MEMORY CARD
169
USING A MEMORY CARD
You can expand the storage
capabilities of your camera by using
a commercially available memory
card (SD memory card or
MultiMediaCard). You can also
copy files from built-in memory to a
memory card and from a memory
card to built-in memory.
•Normally, files are stored in built-in memory. When you
insert a memory card, however, the camera automatically
stores files to the card.
•Note that you cannot save files to built-in memory while a
memory card is installed...

USING A MEMORY CARD
170
Using a Memory Card
 IMPORTANT! 
•Make sure you turn off the camera before inserting or
removing a memory card.
•Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the slot when
you feel resistance.
To insert a memory card into the camera
1.Slide the battery cover
in the direction
indicated by the arrow,
and then swing it open.
2.Positioning the memory
card so its front is
facing in the same
direction as the
camera’s monitor
screen,...