Casio Exilim Card Ex S600 Users Guide

FILE MANAGEMENT
151
FILE MANAGEMENT
The file management capabilities of the camera make it
easy to keep track of images. You can protect files against
deletion and store the files you want in the camera’s built-in
memory.
Folders
Your camera automatically creates folders in its built-in
memory or on the memory card.
Memory Folders and Files
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names are...

FILE MANAGEMENT
152
4.Use [
] and [] to
select “On”, and then
press [SET].
•A file that is protected is
indicated by the 
mark.
•To unprotect a file, select
“Off” in step 4, and then
press [SET].
5.Press [MENU] to exit the menu screen.
Protecting Files
Once you protect a file it cannot be deleted (page 149).
You can protect files individually or you can protect all files
in memory with a single operation.
 IMPORTANT! 
•Even if a file is protected, it still will be deleted by a
memory card format...

FILE MANAGEMENT
153
To protect all files in memory
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Protect”, and
then press [].
3.Use [
] and [] to select “All Files : On”, and
then press [SET].
•To unprotect all files, press [SET] in step 3 so the
setting shows “All Files : Off”.
4.Press [MENU] to exit the menu screen.
Using the FAVORITE Folder
You can copy scenery shots, photos of your family, or other
special images from a file storage folder (page 201) to the
FAVORITE folder in...

FILE MANAGEMENT
154
3.Use [
] and [] to
select “Save”, and
then press [SET].
•This displays the names
of the files in built-in
memory or on the loaded
memory card.
4.Use [] and [] to select the file you want to
copy to the FAVORITE folder.
5.Use [
] and [] to select “Save”, and then
press [SET].
•This copies the displayed file to the FAVORITE
folder.
6.After copying all of the files you want, use [
]
and [] to select “Cancel”, and then press
[SET] to exit.
 NOTE 
•Copying an image file with the...

FILE MANAGEMENT
155
To display a file in the FAVORITE folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [
] and [] to select “Show”, and then
press [SET].
•If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
4.Use [] (forward) and
[] (back) to scroll
through the files in the
FAVORITE folder.
5.After you are finished viewing files, press
[MENU] twice to exit.
File Name
 IMPORTANT! 
•Note that a FAVORITE folder is...

FILE MANAGEMENT
156
To delete a file from the FAVORITE
folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [
] and [] to select “Show”, and then
press [SET].
4.Press [] ( ).
5.Use [] and [] to select the file you want to
delete from the FAVORITE folder.
6.Use [
] and [] to select “Delete”, and then
press [SET].
•To exit the file delete operation without deleting
anything, select “Cancel”.
7.After deleting all of the files you want, use [
]...

OTHER SETTINGS
157
OTHER SETTINGS
Configuring Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or all
the way, or perform a key operation.
To configure sound settings
1.Press [MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [
] and [] to select the sound whose
setting you want to configure, and then press
[].
4.Use [
] and [] to change the setting, and
then press [SET].
Select this setting:
Sound 1...

OTHER SETTINGS
158
To set the audio volume level for movie
and audio snapshot playback
1.Press [MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [
] and [] to select “ Play”.
4.Use [] and [] to specify the playback
volume setting you want, and then press
[SET].
•You can set the playback volume in the range of 0
(no sound) to 7 (loudest).
 IMPORTANT! 
•The volume setting you make here does not affect
the video output volume level (page 146).
Specifying an Image for the...

OTHER SETTINGS
159
 IMPORTANT! 
•You can select any one of the following types of
image as the startup image.
—The camera’s built-in image
—A snapshot
—The image only of an audio snapshot
•Only one image can be stored in startup image
memory at one time. Selecting a new startup image
overwrites anything that is already stored in startup
image memory. Because of this, if you want to return
to a previous startup image, you need to have a
separate copy of that image in the camera’s standard
image memory....

OTHER SETTINGS
160
Setting the Clock
Use the procedures in this section to select a Home Time
Zone, and to change its date and time settings. If you want
to change the time and date setting only without changing
the Home Time Zone, perform the procedure under “To set
the current time and date” (page 161) only.
 IMPORTANT! 
•Make sure you select your Home Time zone (the
zone where you are currently located) before
changing the time and date settings. Otherwise, the
time and date setting will change...