Casio Ex S10 Users Guide
Have a look at the manual Casio Ex S10 Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 118
118Transferring Document Data from Your Computer to the
Camera
4.Click the [OK] button.
• This will display a dialog box for configuring data settings.
5.Check the current data settings (date, file name, icon) and then click
[OK].
This will convert the document data to a JPEG image and transfer the image to
the camera.
• You can change the date, filename, and icon settings if you want.
• If you want a document image be displayed on the camera’s monitor screen
using an orientation that is different...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-117.png "Page 118
118Transferring Document Data from Your Computer to the
Camera
4.Click the [OK] button.
• This will display a dialog box for configuring data settings.
5.Check the current data settings (date, file name, icon) and then click
[OK].
This will convert the document data to a JPEG image and transfer the image to
the camera.
• You can change the date, filename, and icon settings if you want.
• If you want a document image be displayed on the camera’s monitor screen
using an orientation that is different...")
![Page 119
119Transferring Document Data from Your Computer to the
Camera
.To transfer document data to the camera
1.Connect the camera to your Macintosh (page 110).
• Before connecting the camera to your Macintosh, make sure that a memory
card is loaded in the camera (page 146).
2.On your Macintosh, open the document data that you want to transfer
to the camera.
3.On the Macintosh menu bar, click “File” * “Print” to display the print
dialog box.
4.Click the [PDF] button and select “CASIO DATA TRANSPORT” from...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-118.png "Page 119
119Transferring Document Data from Your Computer to the
Camera
.To transfer document data to the camera
1.Connect the camera to your Macintosh (page 110).
• Before connecting the camera to your Macintosh, make sure that a memory
card is loaded in the camera (page 146).
2.On your Macintosh, open the document data that you want to transfer
to the camera.
3.On the Macintosh menu bar, click “File” * “Print” to display the print
dialog box.
4.Click the [PDF] button and select “CASIO DATA TRANSPORT” from...")
![Page 120
120Transferring Document Data from Your Computer to the
Camera
.To zoom a document page
1.Display the page of the document you want to zoom.
2.Slide the zoom controller towards z to enlarge.
You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor
screen. Slide the zoom controller towards w to unzoom the image.
– If display indicators are turned on, an indicator in the lower right corner of the
monitor screen shows what part of the zoomed image is currently displayed.
– To exit the...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-119.png "Page 120
120Transferring Document Data from Your Computer to the
Camera
.To zoom a document page
1.Display the page of the document you want to zoom.
2.Slide the zoom controller towards z to enlarge.
You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor
screen. Slide the zoom controller towards w to unzoom the image.
– If display indicators are turned on, an indicator in the lower right corner of the
monitor screen shows what part of the zoomed image is currently displayed.
– To exit the...")
![Page 121
121Transferring Document Data from Your Computer to the
Camera
.To specify the initial data mode screen
1.Display the page of the document and then press [MENU].
2.On the “Set Up” tab, select “DATA View”, and then press [6].
3.Use [8] and [2] to select the setting you want, and then press [SET].
You can protect a specific document or all documents against deletion.
1.Display any page in the document that contains the page you want to
protect and then press [MENU].
2.On the “DATA” tab, select “Protect”,...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-120.png "Page 121
121Transferring Document Data from Your Computer to the
Camera
.To specify the initial data mode screen
1.Display the page of the document and then press [MENU].
2.On the “Set Up” tab, select “DATA View”, and then press [6].
3.Use [8] and [2] to select the setting you want, and then press [SET].
You can protect a specific document or all documents against deletion.
1.Display any page in the document that contains the page you want to
protect and then press [MENU].
2.On the “DATA” tab, select “Protect”,...")
![Page 122
122Transferring Document Data from Your Computer to the
Camera
.Deleting a Document
You can delete a single document or you can batch delete all of the documents.
• Formatting camera memory (page 132) also will delete all contents on the memory
card or in built-in memory.
To delete a single document
1.On the document menu, use [8], [2], [4], and [6] to move the
selection boundary to the document you want to delete.
2.Press [MENU].
3.Use [8] and [2] to select “1 doc” and then press [SET].
4.In response...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-121.png "Page 122
122Transferring Document Data from Your Computer to the
Camera
.Deleting a Document
You can delete a single document or you can batch delete all of the documents.
• Formatting camera memory (page 132) also will delete all contents on the memory
card or in built-in memory.
To delete a single document
1.On the document menu, use [8], [2], [4], and [6] to move the
selection boundary to the document you want to delete.
2.Press [MENU].
3.Use [8] and [2] to select “1 doc” and then press [SET].
4.In response...")
![Page 123
123Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * R Panel
The REC mode screen layout settings let you select the layout of icons.
• All screen shots in this manual show what appears when the Control Panel is
turned on.
For information about menu operations, see page 56.
Selecting a REC Mode Screen Layout (R Panel)
OnDisplays the...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-122.png "Page 123
123Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * R Panel
The REC mode screen layout settings let you select the layout of icons.
• All screen shots in this manual show what appears when the Control Panel is
turned on.
For information about menu operations, see page 56.
Selecting a REC Mode Screen Layout (R Panel)
OnDisplays the...")
![Page 124
124Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * P Display
The PLAY mode screen layout settings let you select how display images are shown
on the monitor screen.
Procedure
[MENU] * Set Up Tab * Screen
You can change the brightness of the monitor screen.
Selecting a PLAY Mode Screen Layout (P Display)
WideWith this setting, the display image is the
maximum possible size that allows the entire
image to be displayed horizontally. With some
aspect ratios, the top and bottom of the image
will...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-123.png "Page 124
124Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * P Display
The PLAY mode screen layout settings let you select how display images are shown
on the monitor screen.
Procedure
[MENU] * Set Up Tab * Screen
You can change the brightness of the monitor screen.
Selecting a PLAY Mode Screen Layout (P Display)
WideWith this setting, the display image is the
maximum possible size that allows the entire
image to be displayed horizontally. With some
aspect ratios, the top and bottom of the image
will...")
![Page 125
125Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p]
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
• If you select an audio snapshot as the...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-124.png "Page 125
125Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p]
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
• If you select an audio snapshot as the...")
![Page 126
126Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 114).
Specifying the File Name Serial Number Generation Rule
(File No.)
ContinueTells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
card already has files...](http://img.usermanuals.tech/thumb/16/49685/w64_casio_ex-s10-user-s-guide-125.png "Page 126
126Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 114).
Specifying the File Name Serial Number Generation Rule
(File No.)
ContinueTells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
card already has files...")
121Transferring Document Data from Your Computer to the Camera .To specify the initial data mode screen 1.Display the page of the document and then press [MENU]. 2.On the “Set Up” tab, select “DATA View”, and then press [6]. 3.Use [8] and [2] to select the setting you want, and then press [SET]. You can protect a specific document or all documents against deletion. 1.Display any page in the document that contains the page you want to protect and then press [MENU]. 2.On the “DATA” tab, select “Protect”, and then press [6]. You also can use the same procedure as above in the PLAY mode to protect a document (page 86). .To delete a document page 1.Display any page in the document that contains the page you want to delete and then press [2] ( ). 2.Use [4] and [6] to select the page you want to delete. 3.Use [8] and [2] to select “1 page” and then press [SET]. To delete all of the pages in the document, select “All pages”. 4.To delete other pages in the document, repeat steps 2 and 3. • To exit the delete operation, press [MENU]. Page ViewDisplays the last document page viewed List ViewDisplays the document image menu Managing Document Data on the Camera Protecting Document Data Deleting Document Data C
122Transferring Document Data from Your Computer to the Camera .Deleting a Document You can delete a single document or you can batch delete all of the documents. • Formatting camera memory (page 132) also will delete all contents on the memory card or in built-in memory. To delete a single document 1.On the document menu, use [8], [2], [4], and [6] to move the selection boundary to the document you want to delete. 2.Press [MENU]. 3.Use [8] and [2] to select “1 doc” and then press [SET]. 4.In response to the confirmation message that appears, use [8] and [2] to select “Yes”, and then press [SET]. To delete all documents 1.While the document menu is displayed, press [MENU]. 2.Use [8] and [2] to select “All docs” and then press [SET]. 3.In response to the confirmation message that appears, use [8] and [2] to select “Yes”, and then press [SET].
123Other Settings (Set Up) Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. Procedure [MENU] * Set Up Tab * R Panel The REC mode screen layout settings let you select the layout of icons. • All screen shots in this manual show what appears when the Control Panel is turned on. For information about menu operations, see page 56. Selecting a REC Mode Screen Layout (R Panel) OnDisplays the Control Panel. The Control Panel makes it quick and easy to change certain camera settings. OffTurns off Control Panel display. This setting helps to view more of the image when the 16:9 aspect ratio is selected. Certain camera settings are indicated by icons on the image.
124Other Settings (Set Up) Procedure [MENU] * Set Up Tab * P Display The PLAY mode screen layout settings let you select how display images are shown on the monitor screen. Procedure [MENU] * Set Up Tab * Screen You can change the brightness of the monitor screen. Selecting a PLAY Mode Screen Layout (P Display) WideWith this setting, the display image is the maximum possible size that allows the entire image to be displayed horizontally. With some aspect ratios, the top and bottom of the image will be cut off. 4:3100% of the display image is always visible. With some aspect ratios, black bands may appear above and below, or to the left and right of the image. Adjusting Monitor Screen Brightness (Screen) Auto 1 or Auto 2With this setting, the camera detects available light levels and automatically adjusts the brightness of the monitor screen accordingly. • Auto 2 adjusts to a brighter setting more quickly than Auto 1. +2Brightness that is greater than +1, which makes the screen easier to view. This setting consumes more power. +1Bright setting for outdoor use, etc. Brightness that is greater than 0. 0Normal monitor screen brightness for indoor use, etc.
125Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Sounds • Setting a volume level of 0 mutes output. Procedure [MENU] * Set Up Tab * Startup Display the image you want to use as your startup image and then select “On”. • The startup image does not appear when you turn on the camera by pressing [p] (PLAY). • You can specify a snapshot you recorded as the startup image, or you can use the special startup image provided in the camera’s built-in memory. • If you select an audio snapshot as the startup image, the audio will not play at startup. • Formatting built-in memory (page 132) will delete the current startup image setting. Configuring Camera Sound Settings (Sounds) Startup Specifies the startup sound Sound 1 - 5: Built-in sounds (1 through 5) Off: Sound off Half Shutter Shutter Operation Operation ( )Specifies the sound volume. This setting is also used as the audio level during video output (page 75). Play ( )Specifies the volume of movie and Audio Snapshot audio output. This volume setting is not used during video output (from the USB/AV port). Configuring a Startup Image (Startup) = =
126Other Settings (Set Up) Procedure [MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 114). Specifying the File Name Serial Number Generation Rule (File No.) ContinueTells the camera to remember the last used file number. A new file will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. If a memory card is loaded and that card already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the existing file names plus 1. ResetRestarts the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. If a memory card is loaded and that card already has files stored on it, numbering of new files will start from the largest sequential number in the existing file names number plus 1.
127Other Settings (Set Up) Procedure [MENU] * Set Up Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1.Use [8] and [2] to select “World” and then press [6]. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2.Use [8] and [2] to select “City” and then press [6]. • To change the “World” setting to summer time, use [8] and [2] to select “DST” and then select “On”. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months. 3.Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET]. 4.Use [8] and [2] to select the city you want and then press [SET]. 5.Press [SET]. Procedure [MENU] * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a snapshot, it cannot be edited or deleted. Example: December 19, 2009, 1:25 p.m. • Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 96). • Digital zoom is disabled while date stamping is turned on. • Date stamping is not possible for the following types of images. – Images recorded with certain BEST SHOT scenes (Business cards and documents, White board, etc.) Configuring World Time Settings (World Time) Time Stamping Snapshots (Timestamp) Date2009/12/19 Date&Time2009/12/19 1:25pm OffNo stamping of date and/or time C
128Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Adjust When the date and time settings are what you want, press [SET] to apply them. • You can specify a date from 1980 to 2049. • Be sure to select your Home City (page 127) before setting the time and date. If you set the time and date while the wrong city is selected for your Home City, the times and dates of all of the World Time cities (page 127) will be wrong. Procedure [MENU] * Set Up Tab * Date Style You can select from among three different styles for the date. Example: December 19, 2009 • This setting also affects the Control Panel date format as shown below (page 23). YY/MM/DD or MM/DD/YY: MM/DD DD/MM/YY: DD/MM Setting the Camera’s Clock (Adjust) [8] [2]Change the setting at the cursor location [4] [6]Move the cursor between settings [BS] (^)Toggles between 12-hour and 24-hour format Specifying the Date Style (Date Style) YY/MM/DD09/12/19 DD/MM/YY19/12/09 MM/DD/YY12/19/09
129Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Language Specify the display language you want. 1Select the tab on the right. 2Select “Language”. 3Select the language you want. Procedure [MENU] * Set Up Tab * DATA View See page 121 for details. Procedure [MENU] * Set Up Tab * Sleep This feature turns off the monitor screen whenever no camera operation is performed for a preset amount of time. Press any button to turn the monitor screen back on. Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is selected.) Sleep is disabled under any of the following conditions. • In the PLAY Mode • While the camera is connected to a computer or other device • During a slideshow • During Auto Shutter standby • During Voice Recording playback or recording • During movie recording and playback • When both sleep and Auto Power Off are turned on, Auto Power Off takes priority. Specifying the Display Language (Language) Specifying the Initial Data Mode Screen (DATA View) Configuring Sleep State Settings (Sleep) 1 23
130Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time. Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) Auto Power Off is disabled under any of the following conditions. • While the camera is connected to a computer or other device • During a slideshow • During Voice Recording playback or recording • During movie recording and playback Procedure [MENU] * Set Up Tab * REC/PLAY • With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC mode or [p] (PLAY) in the PLAY mode. • Change this setting to anything besides “Disable” before connecting to a TV for image viewing. Configuring Auto Power Settings (Auto Power Off) Configuring [r] and [p] Settings (REC/PLAY) Power OnCamera turns on whenever [r] (REC) or [p] (PLAY) is pressed. Power On/OffCamera turns on or off whenever [r] (REC) or [p] (PLAY) is pressed. DisableCamera does not turn on or off whenever [r] (REC) or [p] (PLAY) is pressed.