Casio Ex S10 Users Guide

121Transferring Document Data from Your Computer to the
Camera
.To specify the initial data mode screen
1.Display the page of the document and then press [MENU].
2.On the “Set Up” tab, select “DATA View”, and then press [6].
3.Use [8] and [2] to select the setting you want, and then press [SET].
You can protect a specific document or all documents against deletion.
1.Display any page in the document that contains the page you want to 
protect and then press [MENU].
2.On the “DATA” tab, select “Protect”,...

122Transferring Document Data from Your Computer to the
Camera
.Deleting a Document
You can delete a single document or you can batch delete all of the documents.
• Formatting camera memory (page 132) also will delete all contents on the memory 
card or in built-in memory.
To delete a single document
1.On the document menu, use [8], [2], [4], and [6] to move the 
selection boundary to the document you want to delete.
2.Press [MENU].
3.Use [8] and [2] to select “1 doc” and then press [SET].
4.In response...

123Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform 
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * R Panel
The REC mode screen layout settings let you select the layout of icons.
• All screen shots in this manual show what appears when the Control Panel is 
turned on.
For information about menu operations, see page 56.
Selecting a REC Mode Screen Layout (R Panel)
OnDisplays the...

124Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * P Display
The PLAY mode screen layout settings let you select how display images are shown 
on the monitor screen.
Procedure
[MENU] * Set Up Tab * Screen
You can change the brightness of the monitor screen.
Selecting a PLAY Mode Screen Layout (P Display)
WideWith this setting, the display image is the 
maximum possible size that allows the entire 
image to be displayed horizontally. With some 
aspect ratios, the top and bottom of the image 
will...

125Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p] 
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• If you select an audio snapshot as the...

126Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial 
number used in file names (page 114).
Specifying the File Name Serial Number Generation Rule 
(File No.)
ContinueTells the camera to remember the last used file number. A new file will 
be named using the next sequential number, even if files are deleted or 
if a blank memory card is loaded. If a memory card is loaded and that 
card already has files...

127Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, etc. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use 
the camera, select “Home”.
2.Use [8] and [2] to select “City” and then press [6]....

128Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Adjust
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 1980 to 2049.
• Be sure to select your Home City (page 127) before setting the time and date. If 
you set the time and date while the wrong city is selected for your Home City, the 
times and dates of all of the World Time cities (page 127) will be wrong.
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three...

129Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
Procedure
[MENU] * Set Up Tab * DATA View
See page 121 for details.
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off...

130Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for 
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the 
PLAY mode.)
Auto Power Off is disabled under any of the following conditions.
• While the camera is connected to a computer or other device
• During a slideshow
• During Voice Recording playback or recording
• During movie recording and...