Casio EX FH25 User Manual

121Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Rotation
1.Use [ 8] and [ 2] to select “Rotation”  and then press [SET].
Each press of [SET] will rotate  the displayed image 90 degrees left.
2.When the displayed image is at  the orientation you want, press 
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You 
cannot rotate individual component image in a CS group.
• Rotation of movie images is not supported....

122Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Trimming
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots or movies  you recorded with this camera.
Cropping a Snapshot (Trimming)
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original...

123Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Divide Group
See page 107 for details.
Procedure
[p ] (PLAY)  * Display CS group.  * [MENU]  * PLAY Tab  * 
CS Multi Print
1.Use [ 8] and [ 2] to select “Create”.
• You can use [ 4] and [ 6] to select a different CS group, if you want.
2.Press [SET].
This converts the CS group to a 10M (3648x2736) image with up to 30 CS 
frames (5 vertical x 6 horizontal).
• This camera may not be able to correctly convert a CS group image...

124Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 127).
You can connect the camera directly to a  printer that supports PictBridge and print 
images without going through a computer.
. To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want 
to print to a professional print...

125Printing
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [ 8] and [ 2] to select “PTP (PictBridg e)”, and then press [SET].
.Connecting the Came ra to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.
• The camera does not draw power over the USB cable. Check the battery level  before connecting and make sure it is not too low.
• Make sure that you insert the cable connecto r into the USB/AV port until you feel it 
click...

126Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [ 8] and [ 2] to select “Paper Size”, and then press [ 6].
4.Use [ 8] and [ 2] to select a paper si ze and then press [SET].
• The following are the  available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints usi ng a paper size selected on the printer.
• See the documentation that comes with your printer for information about  paper...

127Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings,  you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service. • Whether or not you will be able to use  DPOF settings for printing depends on the 
printer you are using.
• Some professional print serv ices may not...

128Printing
.Configuring the Same DPOF  Settings for All the Images
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing  * All images
1.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• Note that the specified number of copies  will be printed for all of the images in 
any CS group included with the images.
• If you want to include the date in the images, press [BS] so “On” is shown for...

129Printing
.To configure the same DPOF settings for all the images in a CS 
group
1.While CS image playback is in progre ss or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [ 8] and [ 2] to select “DPOF Printing” and then press [SET].
3.Use [ 8] and [ 2] to select “Frame all”  and then press [SET].
4.Use [8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to...

130Printing
.Date Stamping
You can use one of the following three methods to include the recording date in the 
printout of an image.
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA). You can connect the camera directly to a printer that supports 
PictBridge, and perform image selection and printing using the 
camera monitor screen and controls.
• PRINT Image Matching  III
Using image editing software and printing on a printer that...