Casio EX FH25 User Manual

111Viewing Snapshots and Movies
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are 
displayed on the TV screen. The camera ’s monitor screen will show on-screen 
information only (without any movie image).
• Before connecting to a TV to display images, be sure to configure the camera’s  [r ] (REC) and [ p] (PLAY) buttons for “Power On” or “Power On/Off” (page 154).
• Audio is initially output...

112Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[ p ] (PLAY)  * [MENU]  * PLAY Tab  * Slideshow
For information about menu operations, see page 92.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow.
Images
Specifies the type of images to be included in the slideshow.
All images: Snapshots, movies, continuous shutter images
All images except...

113Other Playback Functions (PLAY)
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the slideshow and returns to the menu screen.
• Adjust audio volume by pressing [ 8] or [ 2] during playback.
• All button operations are disabled while  the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
You can replace the built-in slideshow back ground...

114Other Playback Functions (PLAY)
1.Connect the camera to your computer (pages 133, 140).
If you plan to save the music files to the camera’s memory card, make sure the 
card is loaded in the camera.
2.Perform one of the following operat ions to open the memory card or 
built-in memory.
This will cause the camera to be recogn ized by your computer as a Removable 
Disk (Drive). • Windows
1Windows 7/Vista: Start  * Computer
Windows XP: Start  * My Computer
Windows 2000: Double-click “My Computer”....

115Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Movie Screen  * [MENU]  * PLAY Tab  * 
MOTION PRINT
1.Use [ 4] and [ 6] to scroll 
through the movie frames 
and display the one you 
want to use as the image of 
the MOTION PRINT image.
Holding down [ 4] or [ 6] scrolls 
at high speed.
2.Use [ 8] and [ 2] to select either “9 frames” or “1 frame” and then 
press [SET].
• When “9 frames” is selected, the frame you select in step 1 will be in the center 
of the MOTION PRINT image.
• Only the...

116Other Playback Functions (PLAY)
1.Use [8] and [ 2] to select the editing method you want to use and then 
press [SET].
2.Use the following operatio ns to select the frame 
(point) from which or to which you want to cut 
the movie (the cut point).
3.Press [ 2] to display the editing menu  and specify one or two cut 
points.
4.Use [ 8] and [ 2] to select “Yes” an d then press [SET].
The selected cut operation will take cons iderable time to complete. Don’t try to 
perform any camera operation until...

117Other Playback Functions (PLAY)
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is  less than the size of the movie file you want to edit. If there is not enough memory 
available, delete  files you no longer need to free up more.
• Splitting of a movie into two movies and  splicing of two different movies into a 
single...

118Other Playback Functions (PLAY)
NOTE
• You also can adjust the white balance when recording images (page 43).
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the image was 
altered.
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
Brightness
You can select one of five brightness levels , from +2 (brightest) to –2 (least...

119Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 157).
NOTE
• Performing the above procedure while a CS  group is displayed will protect all the 
images in the CS group. You can protec t individual images in a CS group by 
performing the above procedure while the image is displayed.
. To protect a specific image in a CS group
1.While CS image playback...

120Other Playback Functions (PLAY)
2.Use [8] and [ 2] to select “Protect”  and then press [SET].
3.Use [4] and [ 6] to scroll through images until one you want to protect 
is displayed.
4.Use [ 8] and [ 2] to select “On” and then press [SET].
This will protect the image and display the  › icon.
• To unprotect an image, select “Off” in step 4 and then press [SET].
5.After you are finished, select “Cancel ” and then press [SET] to exit this 
operation.
NOTE
• Note that even if a file is protected, it will...