Casio Ex Fc200s Users Guide

121Other Playback Functions (PLAY)
4.Use [8] and [2] to select “On” and then press [SET].
This will protect the image and display the › icon.
• To unprotect an image, select “Off” in step 4 and then press [SET].
5.After you are finished, select “Cancel” and then press [SET] to exit this 
operation.
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 164).
.To protect all the images in a CS group
1.While a CS group is displayed or while the images of...

122Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time
When the date and time settings are what you want, press [SET] to apply them.
NOTE
• The date and time stamped into an image using the Time Stamp (page 158) cannot 
be edited.
• You cannot edit the date and time of an image that is protected.
• You can input any date from 1980 to 2049.
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab * 
Rotation
1.Use [8] and [2] to select...

123Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can resize an image to one of three sizes: 
8M, 5M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the...

124Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab * 
Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots or movies you recorded with this camera.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Divide Group
See page 106 for details.
Copying Files (Copy)
Built-in * 
CardCopies all files from built-in camera memory to a memory card.
This option copies all the...

125Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Display CS group. * [MENU] * PLAY Tab * 
CS Multi Print
1.Use [8] and [2] to select “Create”.
• You can use [4] and [6] to select a different CS group, if you want.
2.Press [SET].
This converts the CS group to a 16M (4608x3456) image with up to 30 CS 
frames (5 vertical x 6 horizontal).
• This camera may not be able to correctly convert a CS group image with 
another camera.
• The recording date of the converted image will be the same as the...

126Dynamic Photo
Dynamic Photo
This camera comes with a number of subjects in built-in 
memory (“built-in subjects”), which you can insert into 
snapshots and movies to create Dynamic Photo images.
• The term “built-in subjects” refers to the moving figures 
and characters that came pre-programmed in the 
camera’s built-in memory.
Use the following procedure to insert a built-in subject image into a snapshot (except 
for a panorama image) or movie.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Dynamic...

127Dynamic Photo
3.If you are inserting a subject into a movie an 
image will appear on the monitor screen 
showing the approximate location of the 
subject in the movie. Use [4] and [6] to shift 
the location to the position you want. After you 
are finished, press [SET].
• If you insert a subject into a movie, the resulting movie will be a maximum of 
20 seconds long. Everything before and after the insertion is cut off. If the 
movie you are inserting into (original movie) is shorter than 20 seconds,...

128Dynamic Photo
1.Press [p] (PLAY) and then use [4] and [6] to display the Dynamic 
Photo you want to view.
2.If you want to see the subject in the Dynamic Photo movie, press [SET].
The Dynamic Photo is repeated as a continuous loop.
• Movement of the subject also will start automatically about two seconds after 
you display a Dynamic Photo.
A Dynamic Photo with a still image background and a moving subject is stored as a 
series of 20 still images. You can use the following procedure to convert the 20...

129Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 132).
You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
Printing Snapshots...

130Printing
.Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.
• The camera does not draw power over the USB cable. Check the battery level 
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it 
click securely into place. Failure to insert the connector fully can result in poor 
communication or malfunction.
• Note that even while...