Casio EX FC100 User Manual
Here you can view all the pages of manual Casio EX FC100 User Manual. The Casio manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41Snapshot Tutorial
When you press [SLOW] (Slow Motion View), the
camera will start to pre-record images continually in
a buffer and play them back at slow speed. Up to
three seconds worth of pre-recorded images are in
the buffer. Fully pressing the shutter button will save
the currently displayed pre-recorded image. You
can specify one of eight playback speeds for pre-
recorded images.
.To get ready to shoot with Slow Motion View
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the...](http://img.usermanuals.tech/thumb/16/38206/w300_Casio_EX-FC100-40.png "Page 41
41Snapshot Tutorial
When you press [SLOW] (Slow Motion View), the
camera will start to pre-record images continually in
a buffer and play them back at slow speed. Up to
three seconds worth of pre-recorded images are in
the buffer. Fully pressing the shutter button will save
the currently displayed pre-recorded image. You
can specify one of eight playback speeds for pre-
recorded images.
.To get ready to shoot with Slow Motion View
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the...")
41Snapshot Tutorial When you press [SLOW] (Slow Motion View), the camera will start to pre-record images continually in a buffer and play them back at slow speed. Up to three seconds worth of pre-recorded images are in the buffer. Fully pressing the shutter button will save the currently displayed pre-recorded image. You can specify one of eight playback speeds for pre- recorded images. .To get ready to shoot with Slow Motion View 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the...
Page 42
![Page 42
42Snapshot Tutorial
.To shoot with Slow Motion View
1.Point the camera at the subject.
2.Press [SLOW] (Slow Motion View).
This will start slow motion playback of pre-recorded
images on the monitor screen.
• You can use [4] and [6] to change the playback
speed while Slow Motion View playback is in
progress.
3.When the pre-recorded image you want to
save is displayed, press the shutter button.
This will store the displayed image as a snapshot
and exit Show Motion View. To exit Slow Motion
View...](http://img.usermanuals.tech/thumb/16/38206/w300_Casio_EX-FC100-41.png "Page 42
42Snapshot Tutorial
.To shoot with Slow Motion View
1.Point the camera at the subject.
2.Press [SLOW] (Slow Motion View).
This will start slow motion playback of pre-recorded
images on the monitor screen.
• You can use [4] and [6] to change the playback
speed while Slow Motion View playback is in
progress.
3.When the pre-recorded image you want to
save is displayed, press the shutter button.
This will store the displayed image as a snapshot
and exit Show Motion View. To exit Slow Motion
View...")
42Snapshot Tutorial .To shoot with Slow Motion View 1.Point the camera at the subject. 2.Press [SLOW] (Slow Motion View). This will start slow motion playback of pre-recorded images on the monitor screen. • You can use [4] and [6] to change the playback speed while Slow Motion View playback is in progress. 3.When the pre-recorded image you want to save is displayed, press the shutter button. This will store the displayed image as a snapshot and exit Show Motion View. To exit Slow Motion View...
Page 43
![Page 43
43Snapshot Tutorial
The Lag Correction function lets you correct for the lag time from the point you decide
to shoot until the point it takes for the shutter to actually release. This feature actually
does not speed up shutter release, but instead it pre-records images when you half-
press the shutter button and saves what occurred slightly before you press the
shutter button.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third control panel
option from the bottom (Lag Correction)....](http://img.usermanuals.tech/thumb/16/38206/w300_Casio_EX-FC100-42.png "Page 43
43Snapshot Tutorial
The Lag Correction function lets you correct for the lag time from the point you decide
to shoot until the point it takes for the shutter to actually release. This feature actually
does not speed up shutter release, but instead it pre-records images when you half-
press the shutter button and saves what occurred slightly before you press the
shutter button.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third control panel
option from the bottom (Lag Correction)....")
43Snapshot Tutorial The Lag Correction function lets you correct for the lag time from the point you decide to shoot until the point it takes for the shutter to actually release. This feature actually does not speed up shutter release, but instead it pre-records images when you half- press the shutter button and saves what occurred slightly before you press the shutter button. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the third control panel option from the bottom (Lag Correction)....
Page 44
44Snapshot Tutorial NOTE • Lag Correction will not be performed if you press the shutter button all the way without first pressing it half way. • If the camera’s image size setting is 9M, 3:2, or 16:9 when you shoot with Lag Correction, the size of the resulting image will be 6M. • The shooting range of Lag Correction is narrower than that of the Single Shot mode. • The lag correction time you should select depends on a variety of factors. The lag from the point when you decide to shoot to the point...
Page 45
![Page 45
45Snapshot Tutorial
1.In the REC mode, press [2] ( )
once.
2.Use [4] and [6] to select the flash
setting you want and then press
[SET].
3.Press the shutter button to shoot.
• For information about Flash Range, see page 187.
Using Flash (Flash)
Auto FlashFlash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash OffFlash does not fire.
Flash OnFlash always fires. This setting can be used to brighten a
subject that normally comes out dark due to...](http://img.usermanuals.tech/thumb/16/38206/w300_Casio_EX-FC100-44.png "Page 45
45Snapshot Tutorial
1.In the REC mode, press [2] ( )
once.
2.Use [4] and [6] to select the flash
setting you want and then press
[SET].
3.Press the shutter button to shoot.
• For information about Flash Range, see page 187.
Using Flash (Flash)
Auto FlashFlash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash OffFlash does not fire.
Flash OnFlash always fires. This setting can be used to brighten a
subject that normally comes out dark due to...")
45Snapshot Tutorial 1.In the REC mode, press [2] ( ) once. 2.Use [4] and [6] to select the flash setting you want and then press [SET]. 3.Press the shutter button to shoot. • For information about Flash Range, see page 187. Using Flash (Flash) Auto FlashFlash fires automatically in accordance with exposure (amount of light and brightness) conditions. Flash OffFlash does not fire. Flash OnFlash always fires. This setting can be used to brighten a subject that normally comes out dark due to...
Page 46
46Snapshot Tutorial NOTE • Take care so your fingers and the strap do not block the flash. • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time (page 187) depends on operating conditions (battery condition, ambient temperature, etc.). • Shooting with flash turned off when lighting is dim results in a slow shutter speed, which can cause image blur due to camera movement. Under such conditions, secure the camera with a tripod, etc. • With red eye...
Page 47
![Page 47
47Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the bottom control panel option (Date/Time).
You can use [4] and [6] to select date or time display.
NOTE
• You can select either of two display styles (page 154) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
Your camera provides you with 5X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center...](http://img.usermanuals.tech/thumb/16/38206/w300_Casio_EX-FC100-46.png "Page 47
47Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the bottom control panel option (Date/Time).
You can use [4] and [6] to select date or time display.
NOTE
• You can select either of two display styles (page 154) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
Your camera provides you with 5X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center...")
47Snapshot Tutorial 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the bottom control panel option (Date/Time). You can use [4] and [6] to select date or time display. NOTE • You can select either of two display styles (page 154) for the date: Month/Day or Day/Month. • The time is displayed using 24-hour format. Your camera provides you with 5X optical zoom (that changes the lens focal distance), which can be used in combination with digital zoom (that digitally processes the center...
Page 48
48Snapshot Tutorial NOTE • The higher the digital zoom factor, the coarser the recorded image. Note that the camera also has a function that lets you record using digital zoom without image deterioration (page 49). • Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto. • Performing a zoom operation changes the lens aperture. • Both optical zoom and digital zoom are disabled during high speed movie recording. • Zooming with digital zoom only...
Page 49
49Snapshot Tutorial • The deterioration point depends on the current image size setting (page 35). The smaller the image size setting, the higher the zoom factor you can use before reaching the image deterioration point. • Though digital zoom generally causes a deterioration of image quality, some digital zoom without image deterioration is possible with image sizes of “6M” and smaller. The range in which you can use digital zoom without image deterioration is indicated on the display. The...
Page 50
![Page 50
50Snapshot Tutorial
Pressing Ç (Continuous Shutter) toggles between
the Continuous Shutter mode and the Single Shot
mode (page 26).
With normal-speed continuous shutter (Normal Speed CS) you can shoot a series of
images at a speed of approximately one image per second as long as there is
memory available for image storage.
1.In the REC mode, press [MENU].
2.Use [4] and [6] to select the “REC” tab.
3.Use [8] and [2] to select “CS” and then press [6].
4.Use [8] and [2] to select “Normal Speed CS”, and...](http://img.usermanuals.tech/thumb/16/38206/w300_Casio_EX-FC100-49.png "Page 50
50Snapshot Tutorial
Pressing Ç (Continuous Shutter) toggles between
the Continuous Shutter mode and the Single Shot
mode (page 26).
With normal-speed continuous shutter (Normal Speed CS) you can shoot a series of
images at a speed of approximately one image per second as long as there is
memory available for image storage.
1.In the REC mode, press [MENU].
2.Use [4] and [6] to select the “REC” tab.
3.Use [8] and [2] to select “CS” and then press [6].
4.Use [8] and [2] to select “Normal Speed CS”, and...")
50Snapshot Tutorial Pressing Ç (Continuous Shutter) toggles between the Continuous Shutter mode and the Single Shot mode (page 26). With normal-speed continuous shutter (Normal Speed CS) you can shoot a series of images at a speed of approximately one image per second as long as there is memory available for image storage. 1.In the REC mode, press [MENU]. 2.Use [4] and [6] to select the “REC” tab. 3.Use [8] and [2] to select “CS” and then press [6]. 4.Use [8] and [2] to select “Normal Speed CS”, and...