Casio Ex F1 Users Guide

81Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Anti Shake
You can turn on the camera’s Anti Shake  feature to reduce image blur due to subject 
movement or camera movement when shoot ing a moving subject using telephoto, 
when shooting a fast-moving subject, or w hen shooting under dim lighting conditions.
NOTE
•Only “A
 Camera AS” can be used during movie recording.
• The ISO sensitivity setting (page 34) must be “AUTO” for “ S Image AS” to work.
• If the flash fires, the Anti Shake...

82Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Face Detection
The face detection feature adjusts focus and brightness to the faces in the image.
1.Use [ 4] and [ 6] to select “On” and then press [SET].
2.Point the camera at the subject (s).
The camera will detect human faces and display a 
frame around each one.
3.Half-press the shutter button.
The camera will focus and the frames around the 
faces it focuses on will turn green.
4.Press the shutter button th e rest of the way down....

83Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Continuous AF
Continuous Auto Focus automatically updates  the focus setting while recording is in 
progress.
Turning on Continuous Auto Focus causes auto focus to update continuously.
• Before you half-press the shutter button, the camera focuses at the center of the  screen. If “ — Free” is selected for the “AF Area” setting (page 37) when you half-
press the shutter button, focusing is performed for the area specified by “ — Free”. 
If...

84Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Focus Bracketing
See page 57 for details.
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Digital Zoom
Select “On” when you want to use digital zoom (page 41).
• Digital zoom is disabled while s hooting with the following features.
– Some BEST SHOT scenes (Digital Anti Shake, Digital Panning)
Procedure
[ r ] (REC)  * [MENU]  * REC Tab  * Quick Shutter
When Quick Shutter is turned on, you can pr ess the shutter button all the way without...

85Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Ring Setup
Use this item to specify the function that function ring 
performs during recording.
• When “Zoom” is assigned to the function ri ng, rotating the function ring will not 
perform a zoom operation when any one  of the following conditions exists. 
– High-speed movie recording
– W  selected for the focus setting
– During “Prerecord (Movie)” recording
Procedure
[ r ] (REC)  * [MENU]  * REC Tab  * Save CS Images
See page 58 for...

86Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Grid
The on-screen grid can be displayed on the REC mode 
monitor screen for easy vertical and horizontal alignment 
when composing images.
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Memory
When you turn off the camera, it remembers the current settings of all enabled 
memory items and restores them when you tu rn it back on. Any memory item that is 
disabled will be returned to its initial defaul t setting whenever you turn off the...

87Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * T  Quality (Snapshot)
• The “Fine” setting helps to bring out det ails when shooting a finely detailed image 
that includes dense tree branches or leaves, or an image of a complex pattern.
• Memory capacity (the number of images you  can record) will be affected by the 
quality settings you configure (page 177).
Procedure
[ r ] (REC)  * [MENU]  * Quality Tab  * HD  » Quality
You can configure movie quality settings  when recording a HD...

88Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * HS  » Speed
You can configure frame rate settings when recording a high-speed movie (page 64). 
A fast frame rate (such as 1200 fps) will result in a smaller image size.
• With the “30-300 fps” high-speed movie setting, shooting starts with a frame rate of  30 fps. You can change the frame rate to 300 fps at some point during the movie. 
To adjust the frame rate, press [SET]. If “C S fps” is specified for the function ring 
setting,...

89Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * Flash Intensity
You can specify one of 13 flash intensity settings, from –2.0 EV (weakest) to +2.0 EV 
(strongest).
• Flash intensity may not change when the subject is too far away or too close.
Procedure
[ r ] (REC)  * [MENU]  * Quality Tab  * Flash Assist
The subject in an image will look 
too dark if flash intensity is not 
enough to reach a subject that is 
too far away. When this happens, 
you can use flash assist to 
supplement...

90Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * Sharpness
You can specify one of five sharpness settings  from +2 (sharpest) to –2 (least sharp).
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * Saturation
You can specify one of five saturation setti ngs from +2 (most saturated) to –2 (least 
saturated).
Procedure
[ r ] (REC)  * [MENU]  * Quality Tab  * Contrast
You can specify one of five contrast settings  from +2 (most contrast between light and 
dark) to –2 (least contrast...