Casio Ex F1 Users Guide

121Printing
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA).
• PRINT Image Matching  III
Using image editing software and printing on a printer that supports 
PRINT Image Matching  III makes it possible to use information about 
shooting conditions that is recorded with the image, and produce 
exactly the type of image you want. PRINT Image Matching and 
PRINT Image Matching  III are trademarks of Seiko Epson Corporation.
•Exif...

122Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a 
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and 
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a 
computer and 
view them there • Save images and view them manually 
(USB connection) (pages 124, 130).
Playback...

123Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are 
running and what you want to do.
.Computer System Requirements for Bundled Software
Computer system requirements are different  for each of the applications. See the 
“Read me” file that comes with each application for details. Information about 
computer system requirements also can be found under “Computer System 
Requirements for Bundled Software” on page 162 of this manual.
Using the...

124Using the Camera with a Computer
.Precautions for Windows Vista Users
• The bundled software will not run under 64-bit versions of Windows Vista.
• The bundled software requires Administrator privileges to run.
• Operation on a self-made computer or under a dual-processor environment is not 
supported.
• Operation may not be possible under certain computer environments.
You can connect the camera to your computer in order to view and store images 
(snapshot and movie files).
. To connect the camera...

125Using the Camera with a Computer
5.Turn on the camera.
6.Copy images to your computer.
Windows XP
1Select “Open folder to view files” and then click “OK”.
2Drag the “DCIM” folder to your Windows desktop to copy it.
Windows Vista
1Select “Open folder to view files”.
2Drag the “DCIM” folder to your Windows desktop to copy it.
Windows 2000
1Double-click “My Computer”.
2Double-click “Removable Disk”.
3Drag the “DCIM” folder to your Windows desktop to copy it.
7.After you finish copying images,...

126Using the Camera with a Computer
IMPORTANT!
• Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card. Doing so can cause 
problems with the camera’s image management  data, which will make it impossible 
to play back images on the camera and c an drastically alter remaining memory 
capacity. Whenever you want to modify,  delete, move, or rename an image, do so 
only on images that are stored on your computer.
• Never...

127Using the Camera with a Computer
.Minimum Computer System Re quirements for Movie Playback
• The above are recommended system environments. Configuring one of these 
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of  movies.
• Even if a computer system that confor ms to the minimum requirements described 
above, there may be cases when frames will be dropped and playback will not be 
possible.
. Recommended Computer...

128Using the Camera with a Computer
.To install YouTube Uploader for CASIO
1.On the CD-ROM menu screen, select  “YouTube Uploader for CASIO”.
2.After reading the information about installation conditions and system 
requirements for installation in the “Read me” file, install YouTube 
Uploader for CASIO.
. To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube 
website (http://www.youtube.com/)  and register as a user there.
• Do not upload any...

129Using the Camera with a Computer
1.Start up your computer, and place the bundled CD-ROM into its CD-
ROM drive.
Normally, this should cause the menu screen to appear automatically. If your 
computer does not display the menu screen automatically, navigate to the CD-
ROM on your computer and then doubl e-click the “AutoMenu.exe” file.
2.On the menu screen, click the “Langu age” down arrow button and then 
select the language you want.
3.Click “Manual” to select it and then click “Digital Camera”....

130Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS 
you are running and what you want to do.
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X  10.0. Operation is supported with Mac OS  9, X (10.1, 10.2, 10.3, 10.4) only. Use 
the standard USB driver that comes with your supported operating system.
. To connect the camera to your computer and save files
1.Turn on the camera and press [MENU].
2.On...