Casio Cassiopeia Be 300 Pocket Manager Users Guide

61
Testing a Dial-up Connection Setup
Perform the following steps to test a connection setup you created using the procedure under “To
configure a dial-up connection setup”.
1. Turn off your CASSIOPEIA and connect it to the device you plan to use to dial-up your
service provider.
•You can connect to a mobile phone or install a modem card. See the separate Hardware
Manual for details about using a cell phone or modem card.
2. Turn on your CASSIOPEIA.
3. On the Top Menu, double-tap Connections.
•This...

62
7. A dialog box like the one shown below appears when a dial-up connection is established. Your
CASSIOPEIA is now connected to the Internet.
•You can now use your CASSIOPEIA to browse Websites and to send and receive e-mail. See
“3-3 Mail” on page 67 and “3-4 Internet” on page 93 for more information.
8. To terminate the dial-up connection, tap Disconnect.
NOTE
•Tapping the Hide Window button on the Dial-up Connection dialog box or tapping anywhere
outside of the dialog box causes it to move to the...

63
Configuring a LAN Connection
Use the LAN connection setup when you want to connect to the Internet through a LAN
(network) at your office, etc. Note that you should contact the system administrator of the network
to which you are connecting for the information you need when configuring the setup.
To configure a LAN connection setup
1. On the Top Menu, double-tap Connections.
•This starts up Connections and displays a screen like the one shown below.
2. Tap New Settings....
•This displays a screen like...

64
3. After you are finished, tap .
•This displays a screen like the one shown below.
4. After you are finished, tap .
•This displays a screen like the one shown below.
Tap here and then select the LAN card you are using for
your LAN connection.
If you want to use a fixed LAN IP address for the
CASSIOPEIA, specify the address here. If you want the
IP address detected automatically, select the Auto detect
option.
LAN setup 1 screen
Input a domain name and DNS address.
If you want the DNS address detected...

65
5. After you are finished, tap .
•This displays a screen like the one shown below.
6. After you are finished, tap .
•This displays a screen for configuring your mail account setup.
•From here, perform steps 5 through 9 of the procedure under “To configure a dial-up
connection setup” on page 56.
Editing a Connection Setup
Use the procedure below to edit the contents of an existing connection setup.
To edit the contents of a connection setup
1. On the Top Menu, double-tap Connections.
•This starts up...

66
To copy an existing connection setup
1. On the Top Menu, double-tap Connections.
•This starts up Connections.
2. Tap the connection setup you want to copy.
3. Tap Edit L → Copy Setting.
•This creates a copy of the connection setup you selected in step 2. The setup copy is
automatically assigned the same name as the original setup, with a number added at the end.
Example:Original Setup Name: CASIO Dial-up
Setup Copy Name: CASIO Dial-up (2)
Deleting a Connection Setup
Use the procedure below to delete a...

67
3-3 Mail
“Mail” is an application that makes it possible for you to send and receive e-mail with your
CASSIOPEIA. The following are some of the useful features and functions available with Mail.
•Support for multiple accounts
•Powerful mail management tools for creating folders, batch moving multiple messages,
copying, deleting, and moving messages to a storage card, etc.
•Support for sending and receiving attached files
•Phrase memory for quick and easy mail message writing
NOTE
•Mail supports e-mail...

68
2. Tap Ye s.
•This creates mail accounts for all of the connection setups you have configured in Connec-
tions, and displays the account/folder list shown below.
NOTE
•Note that the above procedure is also required the first time you start up Mail after deleting all
Mail accounts.
•If you do not have any connection setups configured in Connections, starting up Mail causes
the message shown below to appear.
Ta p  Ye s to start up Connections and display the new connection setup screen. See “3-2...

69
Starting Up Mail After Setting Up an Account
After you set up one or more mail account the first time you start up Mail, starting it up again
displays the account/folder list. Note, however, that if you added a new connection setup with
Connections since the last time you used Mail, starting it up causes a message like the one shown
below to appear.
Ta p  Ye s to configure a mail account for the new connection setup.
Using the Account/Folder List
The account/file list that appears when you start up...

70
Account L Menu
Use this menu to create a new account, and to select an existing account to edit or delete it. See
“Managing Accounts” on page 70 for more information.
Folder L Menu
Use this menu to create a new folder, and to select a folder to rename or delete it. See “Creating
Folders and Managing Mail Messages” on page 87 for more information.
Settings Button
Tapping this button displays a dialog box for editing the signature block for outgoing messages,
and for changing a variety of settings...