Casio Cassiopeia Be 300 Pocket Manager Users Guide

141
MEMO
See page 24 for information about setting the current time and date.
Selecting a Setup Menu Item
You can use any one of the following methods to select a setup menu item and display the
corresponding setup screen.
•Double-tap the menu item you want.
•Tap the menu item you want once so it is highlighted, and then tap it again.
•Use the up and down cursor keys to move the highlighting to the menu item you want, and the
press the OK button.
To exit a setup screen, tap its close button to return to...

142
Password
Use this screen to configure the CASSIOPEIA so it requires input of a password when it is turned
on. Data cannot be accessed unless the password is input.
Color Scheme
You can use this setting screen to select from among eight color schemes that change the colors of
command bards, buttons, background, and other display elements.
NOTE
The setting you make here does not immediately affect any programs you have running when you
change the setting. The color scheme will be applied only after you...

143
Brightness
The brightness setting screen has three tabs named Contrast, Brightness, and Auto-Dim.
Contrast Tab
Use this tab to change screen contrast, which affects the relative lightness and darkness of display
colors.
NOTE
You can also use the following button operations at any time to adjust screen contrast without
displaying the brightness setting screen.
Brightness Tab
Use this tab to adjust the brightness of the backlight. You can make separate settings for screen
brightness under battery...

144
NOTE
You can also use the following button operations at any time to adjust screen brightness without
displaying the brightness setting screen.
Auto-Dim Tab
You can use this tab to set up the CASSIOPEIA so its screen dims automatically whenever it is
left idle for a specific amount of time. This helps to extend battery life.
Align Screen
Use this setup screen to align the touch screen whenever you feel the figures on the screen are not
aligned properly with the area you tap with the stylus.
NOTE
•You...

145
Volume & Sounds
The Volume & Sounds setup screen has two tabs, named Volume and Sounds.
Volume Tab
Use the settings on this tab to turn the CASSIOPEIA’s buzzer sound on and off, and to adjust the
volume level of the headphones.
Sounds Tab
Use this tab to enable and disable the various sounds (alarm sound, screen tap confirmation sound,
etc.) produced by the CASSIOPEIA.
Drag this slider or tap the
H and J buttons to
change the headphone
volume setting. Drag this slider or tap
the H and J buttons
to...

146
Power
The Power setup screen shows you remaining battery capacity. You can also use it to configure
auto power off, which turns off the CASSIOPEIA if it is left idle for a specific amount of time.
Memory
The Memory setup screen has two tabs named Memory and Task Manager.
Memory Tab
The Memory tab shows you current memory usage.
Select this option to
enable auto power
off when you are
running under battery
power.
Select this option to
enable auto power
off when you are
running under
external power.Use...

147
Task Manager Tab
You can use the Task Manager tab to shutdown a specific program that is running, or to shutdown
all programs that are running. Shutting down a program frees up program memory space.
•In the Active Programs list, tap the program you want to end.
•To end all programs that are currently running, tap Stop All.
Increasing Available Storage Memory
You can free up more storage memory by performing the following steps.
•Move files from main memory to a storage card.
•Delete files you no...

148
Appendix A: Character Recognizer
Your CASSIOPEIA uses Decuma Character Recognizer developed by Decuma AB. The Decuma
Character Recognizer supports word-by-word, non-cursive handwriting.
Copyright © 2001 by Decuma AB. All rights reserved.
Start using Character Recognizer
Introduction
How to write with Character Recognizer
Pen gestures
Personalizing Character Recognizer
Options
Personalize
Settings
Version
Troubleshooting
Decuma Alphabet Outlines 

149
Start using Character Recognizer
Introduction
Character Recognizer converts your handwriting into typed text and can be used with any
application to input text.
Instead of pen and paper, you use the Stylus and the Touch Screen. Simply write in the designated
input area in the lower part of the screen and the typed characters appear at the cursor in the active
application.
To select Character Recognizer, tap the Input panel switch and select Character Recognizer from
the menu of available input panel...

150
General characters
Select the tab marked A a to write letters and accented letters.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
À Â Á Ä Å Ç È Ê É Ë Ì Î Í Ï Ñ Ò Ô Ó Ö Ù Û Ú Ü
à â á ä å ç è ê é ë ì î í ï ñ ò ô ó ö ù û ú ü ß
The numbers, punctuation marks, and special characters shown below are also supported in this
mode if written with care.
The number ‘0’ has to be written with a diagonal stroke, as shown in the Decuma Alphabet
Outline...