Carrier Tpprh01a Manual

9
ON--SCREEN INDICATORS
1. Day of the week
2. Programming option; indicates which settings are being adjusted
3. Filter, UV lamp, humidifier pad reminders
4. Current temperature
5. Current program routine – follow scheduled programming, hold current
settings, run vacation program
6. Fan mode – on or auto
7. Current system mode – heating, cooling, emergency heat, heat/cool (auto), off
8. Indicates humidify or dehumidify settings
9. F/C – Fahrenheit or Celsius
10. Advanced programming indicators
11. Keypad...

10
QUICK START
Setting the time and day
You must set the time and date before you can use any of the thermostat’s
programming features.
1. Open the door.
2. Press thesetbutton on the left. The screen will show the
wordclockon the left and the time on the bottom.
3. To set the hour, press thebutton underneath the hour,
then press theupordownbutton on the right. Stop at the
desired hour.
4. To set the minutes, press thebutton underneath the
minutes,thenpresstheupordownbutton on the right.
Stop at the...

11
QUICK START
6. To set the month, press thebutton underneath the let-
terM(month), then press theupordownbutton on the
right. Stop at the desired month.
7. To set the day of the month, press thebutton under -
neath the letterD(day), then press theupordown
button on the right. Stop at the desired date.
8. To set the year, press thebutton underneath the let-
terY(year), then press theupordownbutton on the
right. Stop at the desired year.
9. Close the door. 

12
QUICK START
Setting or changing the temperatures for heating and cooling
Your thermostat is installed with pre --set heating and cooling temperature settings.
You can use these or change them so your home is as warm or as cool as you would
like it to be. You can also temporarily change the temperature after you’ve
programmed your thermostat according to your specific schedule needs.
These steps will temporarily hold the temperature where you set it for two hours
until the next programmed cycle...

13
QUICK START
4. Press theupordownbutton, located to the right of the
display, to change the displayed setting. Stop on the de-
sired setting.
5. When there are arrow indicators next to both the words
heatandcoolat the top right of the screen, the heating
and cooling temperatures are also displayed at the bottom
of the screen. You can change either one by pressing the
button underneath the temperature you want to
change, then pressing theupordownbuttononthe
right. Repeat the process for the other...

14
QUICK START
Holding the temperature
Here’s how to override your programmed temperature settings and hold the
temperature at a specific setting without the temperature changing during the next
programmed period.
1. Open the door.
2. Press theschedulebutton at the top. The arrow will
move to the wordholdunder the button.
3. The screen displays the set temperature in the lower right.
To change that temperature, press theupordownbutton
on the right. The temperature will stay at the setting you
selected...

15
QUICK START
Using the ExP – Edge Expansion Port – to program the thermostat
Your Edge thermostat has an unique ExP – Edge Expansion
Port – that allows you to use a digital memory card to program
the thermostat on your computer. The ExP is sold separately as
an accessory.
Remove the dual port digital memory card and insert it in your computer’s digital or
USB memory card reader. Follow the onscreen instructions to program
temperatures, the corresponding time, and the day of the week. You can even...

16
PROGRAMMING THE THERMOSTAT
Determining your programming schedule
Unlike many thermostats, this one gives you the option of programming every day
of the week differently. It is pre --programmed at the factory with the same settings
for all seven days:
Monday
through
SundayTimeHeatCool
Wake6AM6876
Day8AM6085
Evening5PM6876
Sleep10 PM6082 

17
PROGRAMMING THE THERMOSTAT
You can change those settings easily. Each day in your schedule must have four
time periods. The thermostat thinks of these time blocks in terms of when people
wake up, when they leave for the day, when they return home, and when they go to
sleep. Use this blank grid to determine those time periods based on your own
schedule along with how warm or cool you want your home to be at those times.
Day of the week
and program
periodStart timeHeat settingCool setting
Monday Wake...

18
PROGRAMMING THE THERMOSTAT
Tu e s d a y W a k e
Tu e s d a y D a y
Tuesday Evening
Tuesday Sleep
Wednesday Wake
Wednesday Day
Wednesday Evening
Wednesday Sleep