Canon SX6 Projector Mnual Manual

							91
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality from the Image Adjustment Menu
Adjusting the Sharpness
[Sharpness]
You can adjust the sharpness when you want to
make an image sharper or softer.
T
T
Press the [MENU] button when you finish.
Making a Gamma Correction
[Gamma]
You can make a gamma correction if light or
dark portions of an image are obscure.
T
T
Press the [MENU] button when you finish.
 Image adj.
Sharpness
Increases the sharpness of an
image.
Decreases the sharpness of an
image.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
>
<
 Image adj.
Gamma
Makes dark and obscure portions of
an image visible.
Makes light and obscure portions of
an image visible.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
>
<
Projector_E.book  Page 91  Thursday, April 20, 2006  7:11 PM 
						

							92
SETTING UP FUNCTIONS FROM MENUS
Making Color Adjustment (1)
[Color adjustment]
You can make color adjustment for each color
(red, green, and blue).
T
T
Press the [MENU] button when you finish.
Making Color Adjustment (2)
[Color adjustment]
You can adjust color level and color balance and
make color adjustment for each color (red,
green, and blue).
T
T
Press the [MENU] button when you finish.
 Image adj.
Color adjustment
Adjusts the intensity of each color.
[>] Increases the intensity of color.
[] Increases the color reproducibil-
ity of color.
[] Increases the intensity of color.
[] Corrects a reddish image.
[
						

							93
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality from the Image Adjustment Menu
Making Advanced Color Adjustment (1)
[Dynamic gamma]
You can adjust the gradation representation of
light and dark portions of an image automati-
cally.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Making Advanced Color Adjustment (2)
[Mem. color correct]
You can correct colors (e.g. blue sky) in our
memory so that they can be projected more viv-
idly.
T
T
T
Press the [MENU] button when you finish.
 Image adj.
Advanced adjustment
Dynamic gamma
Enables dynamic gamma.
Disables dynamic gamma.
zDynamic gamma automatically opti-
mizes image quality in real time.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
On
Off
 Image adj.
Advanced adjustment
Mem. color correct
Disables the memorized color cor-
rection function.
Specifies the intensity of the memo-
rized color correction in three steps.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
L
M
H
Projector_E.book  Page 93  Thursday, April 20, 2006  7:11 PM 
						

							94
SETTING UP FUNCTIONS FROM MENUS
Making Advanced Color Adjustment (3)
[6-axis color adjust]
You can make fine color adjustment with the 6-
axis color adjustment box (RGB (red/green/blue)
and CMY (cyan/ magenta/yellow)).
T
T
T
The 6-axis color adjustment box appears on the
screen if you select [Adjust].
Press [ ] / [ ] to select the [Hue] or [Saturation]
slider, and press [] to make an adjust-
ment.
Press the [MENU] button when you finish.
Reducing the Lamp Brightness
[Lamp mode]
You can reduce the lamp brightness if you want
to make the image darker or reduce the fan
noise.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
 Image adj.
Advanced adjustment
6-axis color adjust
Enables the 6-axis color adjustment.
Disables the 6-axis color adjust-
ment.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Adjust
Off

						

							95
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality from the Image Adjustment Menu
Resetting the Image Settings
[Reset]
You can reset the current image settings to the
default settings if you want to make all image
settings all over again.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
 Image adj.
Reset
Resets the image settings.
Cancels resetting of the image set-
tings.
zThe projector stores the image set-
tings for each input signal (8) and
image mode (up to 5) separately. If
you select [OK], the settings saved for
the currently selected set of the input
signal and image mode are reset.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
OK
Cancel
Performing [Color adjustment] or [Advanced
adjustment]:
A check mark ( ) appears on the Image
Adjustment menu if you perform [Color
adjustment] or [Advanced adjustment
(Dynamic gamma, Mem. color correct, or
6-axis color adjust )].
Projector_E.book  Page 95  Thursday, April 20, 2006  7:11 PM 
						

							96
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System 
Settings Menu
Setting Auto Setup Function
[Auto setup]
You can select an item you want to enable in the
auto setup function.
T
T
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector automati-
cally for saving power.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
 System settings
Auto setup
Enables/disables the auto focusing.
Enables/disables the auto keystone
correction.
Enables/disables the auto input
selection.
Enables/disables the auto screen
color correction.
zA confirmation screen appears during
the auto setup so that you can check
which functions are enabled/disabled
(P41, 60).
zYou can manually adjust each item.
[Auto focus]: [FOCUS] button (P46)
[Auto keystone]: [KEYSTONE] button
(P47)
[Auto input]: [INPUT] button (P43, 61)
[Auto screen color]: Menu function
(P86)
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Auto focus
Auto keystone
Auto input
Auto screen color
 System settings
Power management mode
Disables the power management
mode.
Enters the power management
mode. The projector restarts projec-
tion when a signal is inputted or any
operation button is pressed.
Enters the exit mode and turns off
the projector automatically.
zYou cannot enable the [Direct Power
on] function if you select [Off].
zThe [POWER] indicator flashes red
and green during the power manage-
ment mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
Standby
Exit
Projector_E.book  Page 96  Thursday, April 20, 2006  7:11 PM 
						

							97
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Skip the POWER Button Operation
[Direct power on]
You can set the projector to be turned on when
you connect the power cord.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Beep
[Beep]
You can enable/disable the beep when you
press a button on the top control or remote con-
trol.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
 System settings
Direct power on
Enables the direct power on func-
tion.
Disables the direct power on func-
tion.
zWait at least 5 minutes before turning
on the projector when you turn off the
projector with the direct power on
function. It may shorten the lamp life if
you turn on the projector immediately
after turning it off.
zSet the previous [Power management
mode] to [Standby] or [Exit] in addi-
tion to this setting if you want to
enable the direct power on function.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
On
 System settings
Beep
Disables the beep.
Enables the beep.
zIt does not beep if you mute the pro-
jector sound temporarily with the
[MUTE] button.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
On
Projector_E.book  Page 97  Thursday, April 20, 2006  7:11 PM 
						

							98
SETTING UP FUNCTIONS FROM MENUS
Prohibiting the Projector Operation
[Key lock]
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Display Language
[Language]
You can select a language to be used in the
menu from 20 different languages.
T
T
 System settings
Key lock
Disables the key lock function.
Prohibits the use of the top control.
Prohibits the use of the remote con-
trol.
zThe key lock function becomes effec-
tive from the moment when the [OK]
button is pressed after selecting [Main
unit] or [Remote control]. Be sure to
press the [OK] button on the top con-
trol or remote control which is not
locked.
zTo unlock the key lock function forc-
ibly, remove the power plug from the
AC outlet after the projection, and
then insert the power plug while hold-
ing down the [OK] button until the pro-
jector beeps.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
Main unit
Remote control
 System settings
Language
English
Germany
French
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Tu r k i s h
Polish
Hungarian
Czech
Danish
Simplified Chinese
Traditional Chinese
Korean
Japanese
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Projector_E.book  Page 98  Thursday, April 20, 2006  7:11 PM 
						

							99
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Press the [OK] button and all words in the menu
will be displayed in the selected language.
Press the [MENU] button when you finish.
Enabling/Disabling the Guide Message
[Guide]
You can enable/disable the guide message
showing how to use the projector.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
 System settings
Guide
Disables the guide message.
Enables the guide message.
zThe guide message appears on the
screen when:
- The projector is turned on (P35).
- The projector is turned off (the 
[POWER] button is pressed) (P53).
- No input signal is confirmed (P32, 
56).
- The invalid button is pressed under 
NO SHOW, FREEZE, or D.ZOOM 
(P66, 67, 69).
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
On
Projector_E.book  Page 99  Thursday, April 20, 2006  7:11 PM 
						

							100
SETTING UP FUNCTIONS FROM MENUS
Turning On/Off the LED Illumination
[LED illumination]
You can turn on/off the LED illumination lamp
and the LEDs on the terminals (P24, 25).
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting up the Remote Control
[Remote control]
You can change the channel settings to prevent
the two remote controls from interfering with
each other when you use two projectors at the
same time.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Channel on the Remote Control
Press the [LIGHT] button for 3 seconds while
holding down the [OK] button on the remote
control.
The above operation toggles the channel
between Ch1 (the button flashes once) and Ch2
(the button flashes twice).
 System settings
LED illumination
Turns off all LEDs.
Turns on LEDs as necessary.
zThis setting does not effect the
POWER indicator or WARNING lamp.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
On
 System settings
Other settings
Remote control
Selects the channel on the projector
you use.
zMake sure to set the same channel for
both remote control and projector.
zPerforming this operation with the
remote control, you cannot control the
projector after pressing the [OK] but-
ton. Make sure to change the channel
for the remote control at the same
time.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Ch1
Ch2
Projector_E.book  Page 100  Thursday, April 20, 2006  7:11 PM