Canon SX6 Projector Mnual Manual

							MULTIMEDIA PROJECTOR
Safety Instructions
Before Use
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
User’s Manual
Projector_E.book  Page 1  Thursday, April 20, 2006  7:11 PM 
						

							2
Quick Reference – How to start projection
Computer
1.Install the projector. P28-29
zInstall the projector at the desired distance from the screen.
zInstall batteries in the remote control (P26)
2.Connect the projector. P32-34
zConnect the projector and the computer with a cable.
3.Turn on the projector. P35-38
zConnect the power cord and turn on the projector.
zAdjust the height of the projecting image (P38).
zSelect a display language when turning on the projector for the first time (P36).
4.Set up the computer. P39-40
zTurn on the computer and set the resolution.
5.Select the input signal by pressing the   button. P43-45
zSelect an appropriate input signal in accord with the signal from the computer.
6.Press the   button. P41
zAdjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
7.Press the   button. P49
zOptimize the input signal with the auto PC function (Skip this step if the projector is
projecting an image properly.)
8.Select the image mode with the   button. P50-51
zSelect an appropriate image mode for projection.
zSpecify the aspect ratio or display area in the [Aspect] menu as required (P52, 78).
9.Start the presentation. P66-71
zSet the useful functions available during the presentation from the remote control.
Turn off the projector P53-54
zTurn off the projector and unplug the power cord.
Finishing the projection...
Projector_E.book  Page 2  Thursday, April 20, 2006  7:11 PM 
						

							3
AV Equipment
1.Install the projector. P28-29
zInstall the projector at the desired distance from the screen.
zInstall batteries in the remote control (P26)
2.Connect the projector. P56-58
zConnect the projector and the AV equipment with a cable* (see P34 for the instruc-
tion on connecting a audio cable).
3.Turn on the projector. P35-38
zConnect the power cord and turn on the projector.
zAdjust the height of the projecting image (P38).
zSelect a display language when turning on the projector for the first time (P36).
4.Set up the AV equipment.
zTurn on the AV equipment and play the video image.
5.Select the input signal by pressing the   button. P61-63
zSelect DIGITAL VIDEO as the input signal for a digital video image.* 
For the other video image, go to step 6.
6.Press the   button. P60
zAdjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
7.Select the image mode with the   button. P50-51
zSelect an appropriate image mode for projection.
zSpecify the aspect ratio or display area in the [Aspect] menu as required (P64, 78,
79).
Turn off the projector P53-54
zTurn off the projector and unplug the power cord.
* Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video
image.
Finishing the projection...
Projector_E.book  Page 3  Thursday, April 20, 2006  7:11 PM 
						

							4
Features of the Multimedia Projector 
SX6/SX60/X600
Thank you for purchasing a Canon projector.
The MULTIMEDIA PROJECTOR SX6/SX60/X600 are high-performance projectors which
project the data from the computer and the moving picture from the DVD player to the big
screen.
Major Features
Smooth and Beautiful Imaging Capability
Incorporation of AISYS, Canons unique optical engine, and LCOS (Liquid Crystal On Sili-
con) achieves high brightness, high contrast ratio, and smooth and beautiful lattice-free
images.
High Brightness of 3500 Lumen (SX6/X600)
This projector provides high brightness of the best-in-class* 3500 lumen.
* Portable projectors less than 5 kg.
Super-Silent Operation of 27dB* (SX60)
This projector achieves super-silence operation as low as 27dB which creates a comfort-
able atmosphere where you can concentrate on watching a movie.
* At a silent mode.
Native SXGA+ Resolution (SX6/SX60)
Native SXGA+ resolution (1400 by 1050 dots) ensures projection of a high-quality image in
a wider projection area with a high degree of resolution.
* X600 supports native XGA resolution (1024 by 768 dots).
High-powered 1.7X Zoom Lens
1.7X zoom aspheric lens can project a 100-inch image when placed 3 m (9.8) to 4.9 m
(16.0) away.
Auto Setup Function for Easy Installation
The Auto Setup Function allows you to install the projector easily by automatically adjust-
ing focus and keystone distortion.
Adobe®RGB Color Space Compatibility (SX6)
AdobeRGB color space compatibility achieves faithful color reproduction.
Home Cinema Mode Reproducing the Atmosphere of a Movie Theater 
(SX60)
You can reproduce the atmosphere of a full-scale movie theater in your home by selecting
Home Cinema from the image mode.
Off and Go Function Allowing the Carriage Immediately After the Use
You can carry the projector immediately after the use because the cooling fan keeps rotat-
ing even if the power cord is removed from the electrical outlet.
Compact and Easy-to-use Wireless Remote Control
It comes with a wireless remote control which allows you to control all functions of this pro-
jector.
Projector_E.book  Page 4  Thursday, April 20, 2006  7:11 PM 
						

							5
Supplied Manuals and Symbols Used in This 
Manual
Supplied Manuals
User’s Manual (This Document)
This is a universal manual for the projector, SX6/SX60/X600. This manual provides detailed
information on how to use the projectors. Read this manual thoroughly to make the most of
your projector and ensure safety.
Quick Start Guide (Another Document)
This guide shows an outline flowchart of the work necessary to start up, adjusting, and turn
off the projector.
Symbols of Button Operations
This projector can be operated using buttons on the remote control or the top control on
the main unit. The remote control allows you to operate all functions of the projector.
In this manual, the button operation is shown as below.
Symbols Used in This Manual
Meanings of the following symbols used in this manual are as follows:
COPYRIGHT NOTICE
zMicrosoft, Windows, Windows Me, Windows 2000 and Windows XP are registered
trademarks of the U.S. Microsoft Corporation in the U.S. and other countries.
zXGA, SXGA, SXGA+, and UXGA are U.S. registered trademarks of IBM Corporation.
zMacintosh is a trademark of the U.S. Apple Computer, Inc. registered in U.S. and other
countries.
zAdobe is a trademark of Adobe systems Incorporated.
zOther company names and product names are registered trademarks or trademarks of
the respective companies.
zThe HD ready logo is a trademark of EICTA.
A precaution about operation or restriction is given here.
An important matter that you should be aware of before operation or a useful tip is provided
here.
Indicates the button oper-
ation on the top control.
Indicates the button opera-
tion on the remote control.
Indicates the button to be 
pressed.
Adjusting the Focus
You can adjust the focus.
Follow the steps below to adjust the focus manually if the Auto setup function (Autonot adjust the focus appropriately.
1Press the [FOCUS] button.
The Focus adjustment window appears.
Projector_E.book  Page 5  Thursday, April 20, 2006  7:11 PM 
						

							6
SAFETY INSTRUCTIONS
Safety Instructions
Before operating this projector, read this manual thoroughly in order to operate the
projector properly.
This projector offers many convenient features and functions.  Operating the projector
properly enables you to manage those features and maintain it in good condition for a long
period.
Improper operation may result in not only reducting the product-life, but also malfunctions,
fire hazards, or other accidents.
If your projector is not operating correctly, read this manual again, check operations and
cable connections, and try the solutions shown in the Troubleshooting section at the end
of this booklet.  If the problem still persists, contact the service center or the dealer where
you purchased the projector.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMPS.  REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUT-
ING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS FOR THIS UNIT IN THE OWNERS
MANUAL.
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of Electronic
Computer/Data Processing Equipment, ANSI/NFPA 75.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Projector_E.book  Page 6  Thursday, April 20, 2006  7:11 PM 
						

							7
SAFETY INSTRUCTIONS
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
zThis projector projects intense light from the projection lens.  Do not stare directly into
the lens if possible, as doing so may result in eye damage.  Be especially careful that
children do not stare directly into the beam.
zInstall the projector in an appropriate position.  Installing the projector in an
unappropriate position may result in a fire hazard.
zAllow for appropriate space above beside and behind of the projector cabinet for
allowing air circulation and cooling of the projector.  Minimum clearances must be
maintained.  If the projector is to be built into a compartment or similarly space, the
minimum distances must be maintained.  Do not cover the ventilation slot on the
projector.  Heat build-up can reduce the service life of your projector, and can also be
dangerous.
zDo not put any flammable objects or spray cans near the projector, as the hot air
exhausted from the ventilation holes may result in an explosion.
zIf the projector is not to be used for an extended period of time, unplug it from the
power outlet.
SIDE and TOP REAR
1 m (3.3) 1 m (3.3) 1 m (3.3)1 m (3.3)
Projector_E.book  Page 7  Thursday, April 20, 2006  7:11 PM 
						

							8
SAFETY INSTRUCTIONS
READ AND KEEP THIS OWNERS MANUAL FOR LATER USE.
All the safety and operating instructions should be read before beginning to operate the
product.
Read all of the instructions given here and retain them for later use.  Unplug this projector
from the AC power supply before cleaning.  Do not use liquid or aerosol cleaners on the
projector.  Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection of the projector during a lightning storm, or when it is left unattended
or unused for long periods of time, unplug it from the wall outlet.  This will prevent damage
due to lightning and power surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a
swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may result in
hazards.
Do not place this projector on an unstable cart, stand, or table.  The projector may fall,
causing serious injury to a child or adult, and serious damage to the projector.  Use only
with a cart or stand recommended by the manufacturer, or sold with the projector.  Wall or
shelf mounting should be carried out in accordance with the manufacturers directions, and
should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided
for ventilation, to insure reliable operation of the equipment and to
protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom
opening should not be blocked by placing the projector on a bed, sofa, rug, or other
similar surface.  This projector should never be placed near or over a radiator or heat
register.
This projector should not be placed in a built-in installation such as a book case unless
proper ventilation is provided.
Projector_E.book  Page 8  Thursday, April 20, 2006  7:11 PM 
						

							9
SAFETY INSTRUCTIONS
Never push objects of any kind into this projector through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind onto the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on the
marking label.  If you are not sure of the type of power supplied, consult your authorized
dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.
Do not allow anything to rest on the power cord.  Do not locate this projector where the
cord may be damaged by people walking on it.
Do not attempt to service this projector yourself as opening or removing covers may
expose you to dangerous voltages or other hazards.  Refer all servicing to qualified service
personnel.
Unplug this projector from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally after following the operating instructions.
Adjust only those controls that are covered in the operating instructions as improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the projector to normal operating condition.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a need for
servicing.
When replacement parts are required, be sure the service technician uses replacement
parts specified by the manufacturer that have the same characteristics as the original
parts.  Unauthorized substitutions may result in fire, electric shock, or injury.
Upon completion of any service or repairs to this projector, ask the service technician to
perform routine safety checks to determine that the projector is in safe operating condition.
Projector_E.book  Page 9  Thursday, April 20, 2006  7:11 PM 
						

							10
SAFETY INSTRUCTIONS
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the
country you purchased it.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY 
ACCESSIBLE.
AC Power Cord for the United States and Canada:
The AC Power Cord used in the United States and Canada is
listed by the Underwriters Laboratories (UL) and certified by the
Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug.  This is a
safety feature to ensure the plug fits into the power outlet.  Do
not try to tamper with this safety feature.  Should you be unable
to insert the plug into the outlet, contact your electrician.
NOTE FOR CUSTOMERS IN THE US
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
European Union (and EEA) only
This symbol indicates that this product is not to be disposed of with
your household waste, according to the WEEE Directive (2002/96/EC)
and your national law. This product should be handed over to a
designated collection point, e.g., on an authorized one-for-one basis
when you buy a new similar product or to an authorized collection site
for recycling waste electrical and electronic equipment (EEE). Improper
handling of this type of waste could have a possible negative impact on
the environment and human health due to potentially hazardous
substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute to
the effective usage of natural resources. For more information about
where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme
or your household waste disposal service. Your cooperation in the
correct disposal of this product will contribute to the effective usage of
natural resources and will avoid incurring administrative sanctions
according to art. 50 and following of Italian legislative decree 22/97. For
more information regarding return and recycling of WEEE products,
please visit www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
Ground
Projector_E.book  Page 10  Thursday, April 20, 2006  7:11 PM