Canon Selphy Cp910 User Guide

							61
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Printing via Wi-Fi
Appendix
Compact Power Adapter CA-CP200 B
Rated Input100 – 240 V AC (50/60 Hz), 1.5 A (100 V) – 0.75 A (240 V)
Rated Output 24 V DC, 1.8 A
Operating Temperature 0 – 45 °C (32 – 113 °F)
Dimensions 122.0 x 60.0 x 30.5 mm (4.80 x 2.36 x 1.20 in.) excluding 
power cord
Weight Approx. 310 g (10.9 oz.)
 Charger Adapter CG-CP200 (Sold Separately)
Rated Input24 V DC
Rated Output 24 V DC
Operating Temperature 5 – 40 °C (41 – 104 °F)
Dimensions 156.2 x 49.0 x 35.5 mm (6.15 x 1.93 x 1.40 in.)
Weight Approx. 134 g (4.7 oz.)
Battery Pack NB-CP2L (Sold Separately)
TypeRechargeable lithium-ion battery
Nominal Voltage 22.2 V DC
Nominal Capacity 1200 mAh
Charging Cycles Approx. 300 times
Operating Temperature 5 – 40 °C (41 – 104 °F)
Dimensions 110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)
Weight Approx. 230 g (8.1 oz.)
•	All data is based on tests by Canon.
•	 Printer specifications or appearance are subject to change without notice.
USA and Canada only:
As a participant in the international Energy Star Program, we 
believe this product satisfies the standards of the Energy Star 
Program.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with\
 
genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accident\
s 
such as fire, etc., caused by the malfunction of non-genuine Canon 
accessories (e.g., a leakage and/or explosion of a battery pack). Plea\
se 
note that this warranty does not apply to repairs arising out of the 
malfunction of non-genuine Canon accessories, although you may request 
such repairs on a chargeable basis.
  
						

							62
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Printing via Wi-Fi
Appendix
FCC Notice
(Printer, Models CD1112 Systems)
This device complies with part 15 of the FCC Rules. Operation is subject\
 to the 
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including inter\
ference that may 
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference i\
n a 
residential installation.
This equipment generates, uses and can radiate radio frequency energy an\
d, if 
not installed and used in accordance with the instructions, may cause ha\
rmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipm\
ent does cause 
harmful interference to radio or television reception, which can be dete\
rmined 
by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
•
 Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
•
 Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the printer must be used w\
ith this 
equipment in order to comply with Class B limits in Subpart B of Part 15\
 of the FCC 
rules.
Do not make any changes or modifications to the equipment unless otherwise 
specified in the manual. If such changes or modifications should be made, you could 
be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Park, Melville, New York 11747, U.S.A.
T

el No. 1-800-OK-CANON (1-800-652-2666)
Canadian Radio Interference Regulations
CAN ICES-3 (B)/NMB-3 (B)Handling and Maintenance
•	 Do not subject the printer to excessive force, which may damage the 
printer or cause paper jams.
•	 Do not expose the printer to insecticides or other volatile substances. \
Additionally, do not store the printer in contact with rubber, vinyl, or plastic 
products over extended periods, which may deteriorate the casing.
•	 Avoid condensation on the printer, which may happen when moving 
the printer from cold to warm environments. Put the printer in a sealed \
plastic bag and allow it to adjust to the new temperature before removin\
g 
the bag. If condensation forms, allow the printer to dry naturally at ro\
om 
temperature before using again.
•	 When the printer becomes dirty, wipe it with a soft, dry cloth.
•	 If the air vent (=
  5) becomes dusty, remove the ink cassette 
(=  15) before wiping the dust away, to prevent dust from getting inside 
and affecting print quality.
•	 Never wipe the printer with solvents, such as benzene or thinner, or 
neutral detergent, which may cause deformation or peeling of the 
casing.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handlin\
g may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
  
						

							63
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Printing via Wi-Fi
Appendix
Wi-Fi (Wireless LAN) Precautions
•	This product is embedded with a wireless device. The model number is 
CD1112 (including WLAN module model WM318).
•	 Countries and Regions Permitting WLAN Use
-
 Use of WLAN is restricted in some countries and regions, and illegal 
use may be punishable under national or local regulations. To avoid 
violating WLAN regulations, visit the Canon website to check where use 
is allowed. 

 
Note that Canon cannot be held liable for any problems arising from 
WLAN use in other countries and regions.
•	 Doing any of the following may incur legal penalties:
-
 Disassembling or modifying the product
- Removing the certification labels from the product
•	 According to foreign exchange and foreign trade law regulations, export \
permission (or service transaction permission) from the Japanese 
government is necessary to export strategic resources or services 
(including this product) outside Japan.
•	 Because this product includes American encryption software, it falls 
under U.S. Export Administration Regulations, and cannot be exported to 
or brought into a country under U.S. trade embargo.
•	 Be sure to make notes of the wireless LAN settings you use.   
The wireless LAN settings saved to this product may change or be 
erased due to incorrect operation of the product, the ef

fects of radio 
waves or static electricity, or accident or malfunction. Be sure to make 
notes of wireless LAN settings as a precaution. Please note that Canon 
accepts no responsibility for direct or indirect damages or loss of 
earnings resulting from a degradation or disappearance of content.
•	 When transferring this product to another person, disposing of it, or 
sending it for repair, be sure to note the wireless LAN settings and reset 
the product to its default settings (erase settings) if necessary. •	
Canon will not make compensation for damages resulting from loss or 
theft of the product.  
Canon accepts no responsibility for damages or loss resulting from 
unauthorized access or use of target devices registered on this product \
due to loss or theft of the product.
•	 Be sure to use the product as directed in this guide.  
Be sure to use the wireless LAN function of this product within the 
guidelines noted in this guide. Canon accepts no responsibility for 
damages or loss if the function and product are used in ways other than \
as described in this guide.
•	 Do not use the wireless LAN function of this product near medical 
equipment or other electronic equipment.  
Use of the wireless LAN function near medical equipment or other 
electronic equipment may affect operation of those devices.
Radio Wave Interference Precautions
This product may receive interference from other devices that emit radio\
 
waves.
To avoid interference, be sure to use this product as far away as possibl\
e 
from such devices, or avoid using the devices at the same time as this 
product.
This product is installed with the WLAN Module which is certified to 
standards set by IDA Singapore.
  
						

							64
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Printing via Wi-Fi
Appendix
•	Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and 
attempt to acquire the data you are sending.
•	 Unauthorized network access
Third parties with malicious intent may gain unauthorized access to the \
network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access 
such as impersonation (where someone assumes an identity to gain 
access to unauthorized information) or springboard attacks (where 
someone gains unauthorized access to your network as a springboard to 
cover their tracks when infiltrating other systems).
To prevent these types of problems from occurring, be sure to thoroughly \
secure your Wi-Fi network.
Only use this product’s Wi-Fi function with a proper understanding of 
Wi-Fi security, and balance risk and convenience when adjusting security 
settings.
While Printing
Do not disconnect the printer from other devices until printing is finished, 
which may cause incomplete or incorrect prints.
This product can print using PictBridge over wireless LANs.
PictBridge technical standards facilitate direct connection of cameras, \
printers, and other devices for easy printing. Support for the PictBridg\
e 
DPS over IP standard enables the product to print wirelessly in network 
environments.
FCC/IC Notice
Model: CD1112 (including WLAN Module Model WM318, FCC ID: AZD318)
This equipment complies with FCC/IC radiation exposure limits set forth \
for an 
uncontrolled environment and meets the FCC radio frequency (RF) Exposu\
re 
Guidelines in Supplement C to OET65 and RSS - 102 of the IC radio frequency 
(RF) Exposure rules. This equipment should be installed and operated keeping the 
radiator at least 20cm or more away from person’s body (excluding extremities: 
hands, wrists, feet and ankles).
This device complies with Part 15 of FCC Rules and Industry Canada licen\
ce-exempt 
RSS standard(s). Operation is subject to the following two conditions:\
 (1) this device 
may not cause interference, and (2) this device must accept any interf\
erence, 
including interference that may cause undesired operation of this device\
.
This transmitter must not be co-located or operated in conjunction with \
any other 
antenna or transmitter.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions 
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
•	Use only networks you are authorized to use.  
This product searches for Wi-Fi networks in the vicinity and displays the 
results on the screen.  
Networks you are not authorized to use (unknown networks) may also 
be displayed. However, attempting to connect to or using such networks 
could be regarded as unauthorized access. Be sure to use only networks 
you are authorized to use, and do not attempt to connect to other 
unknown networks.
If security settings have not been properly set, the following problems \
may 
occur.
  
						

							65
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Printing via Wi-Fi
Appendix
USA and Canada only:
The Lithium ion/polymer battery is recyclable. 
Please call 1-800-8-BATTERY for information on how to recycle this 
battery.
Trademarks and Licenses
•	Microsoft and Windows are trademarks or registered trademarks of 
Microsoft Corporation in the United States and/or other countries.
•	 Macintosh and Mac OS are trademarks of Apple Inc., registered in the 
U.S. and other countries.
•	 App Store, iPhone, and iPad are trademarks of Apple Inc. 
•	 The SDXC logo is a trademark of SD-3C, LLC.
•	 Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™ 
are trademarks or registered trademarks of the Wi-Fi Alliance.
•	 All other trademarks are the property of their respective owners.
•	 This device incorporates exFAT technology licensed from Microsoft.
•	 Portions of the code used in this firmware are based in part on the work 
of the Independent JPEG Group.
Disclaimer
•	Reprinting, transmitting, or storing in a retrieval system any part of t\
his 
guide without the permission of Canon is prohibited.
•	 Canon reserves the right to change the contents of this guide at any tim\
e 
without prior notice.
•	 Illustrations and screenshots in this guide may differ slightly from the 
actual equipment.
•	 The above items notwithstanding, Canon accepts no liability for damages \
due to mistaken operation of the products.
WPA Supplicant License
WPA Supplicant 
Copyright (c) 2003-2012, Jouni Malinen  and contributors  All Rights 
Reserved.
This program is licensed under the BSD license (the one with advertisem\
ent clause 
removed).
If you are submitting changes to the project, please see CONTRIBUTIONS file for more 
instructions.
License
This software may be distributed, used, and modified under the terms of BSD license:
Redistribution and use in source and binary forms, with or without modification, are 
permitted provided that the following conditions are met:
1.
 Redistributions of source code must retain the above copyright notice, t\
his list of 
conditions and the following disclaimer.
2.
 Redistributions in binary form must reproduce the above copyright notice\
, this list of 
conditions and the following disclaimer in the documentation and/or othe\
r materials 
provided with the distribution.
3.
 Neither the name(s) of the above-listed copyright holder(s) nor the \
names of its 
contributors may be used to endorse or promote products derived from thi\
s software 
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT

 HOLDERS AND 
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR ONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.