Canon Selphy Cp910 User Guide

							31
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Printing from a Smar tphone
Even in places without an access point, you can print directly from a 
smartphone connected wirelessly to the printer.
Also, there is no need to install the dedicated application when printin\
g from 
an AirPrint-compatible application (=
  46).
1 Install the dedicated application 
on your smartphone.
zzFor an iPhone, iPad, or iPod touch, visit 
the App Store and download and install 
Canon Easy-PhotoPrint.
zzFor an Android device, download and 
install Canon Easy-PhotoPrint from 
Google Play.
2 Prepare SELPHY.
zzRemove any inserted memory cards or 
USB flash drives.
zzInsert a loaded paper cassette and an 
ink cassette in SELPHY. Refer to “Initial 
Preparations” (=
  8) for details.
3 Access the setting screen.
zzPress the  button.
zzPress the  buttons to select 
[Wi-Fi Settings], and then press the 
 button.
zzPress the  buttons to select 
[Connection Settings], and then press the 
 button.
4 Check the printer name.
zzCheck the displayed printer name and 
press the  button.
zzWhen you connect devices via Wi-Fi, 
this name will be displayed on the target 
device to identify the printer.
zzYou can change the printer name by 
pressing the EDIT button (=  44).
  
						

							32
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
5 Choose the connection method.
zzPress the  buttons to select 
[Direct Connection], and then press the 
 button.
zzThe screen at left is displayed.
zzYou can change the password by 
pressing the EDIT button (=  45).
6 Use your smartphone to join the 
network displayed on the printer 
screen.
zzIn the smartphone’s Wi-Fi settings, select 
the SSID (network name) displayed on 
the printer.
zzEnter the password displayed on the 
printer into the password field.
7 Use your smartphone to print.
zzStart Canon Easy-PhotoPrint, 
choose images, and print. 
zzOnce printing begins, the screen at left is 
displayed.
zzDo not disconnect the devices or close 
the application while this screen is 
displayed. Images may not be printed 
correctly or completely.
zzThe standby screen at left is displayed 
when printing is finished.
•	 Printing in progress cannot be canceled from SELPHY by using the  
button. Use the smartphone to stop printing.
•	 You can also connect the printer to a smartphone via an existing access point. 
In this case, connect the printer and smartphone to the same access poin\
t. For 
details on how to connect the printer to an access point, see “Connec\
ting the 
Printer to the Access Point” (=
  37).
•	 The printer does not enable communication between the devices connected \
to it.
  
						

							33
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Subsequent Printing
•	Once you have completed the connection settings ( =  31 – 32), the 
second, standby screen in step 7 on  =  32 is displayed automatically 
when you turn on the printer. To print, after the standby screen is 
displayed, simply use the smartphone as described in steps 6 – 7 on 
=
  32.
•	 During standby-screen display, you can view the SSID and password by 
pressing the < o> button. You can also change the password on the 
screen displayed by pressing the EDIT button (=
  45).
•	 Even during standby, you can print images on a memory card by 
inserting the card to access the screen in step 4 on  =
  14.
  
						

							34
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
3 Check the printer name.
zzCheck the displayed printer name and 
press the  button.
zzWhen you connect devices via Wi-Fi, 
this name will be displayed on the target 
device to identify the printer.
zzYou can change the printer name by 
pressing the EDIT button (=  44).
4 Choose the connection method.
zzPress the  buttons to select 
[Direct Connection], and then press the 
 button.
zzThe screen at left is displayed.
zzYou can change the password by 
pressing the EDIT button (=  45).
Printing from a Camera
You can print as follows by connecting the printer to a camera compatible 
with DPS over IP, the PictBridge standard for Wi-Fi connections.
1 Prepare SELPHY.
zzRemove any inserted memory cards or 
USB flash drives.
zzInsert a loaded paper cassette and an 
ink cassette in SELPHY. Refer to “Initial 
Preparations” (=
  8) for details.
2 Access the setting screen.
zzPress the  button.
zzPress the  buttons to select 
[Wi-Fi Settings], and then press the 
 button.
zzPress the  buttons to select 
[Connection Settings], and then press the 
 button.
  
						

							35
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
5 Use the camera to join the 
network displayed on the printer 
screen.
zzIn the camera’s Wi-Fi settings, select the 
SSID (network name) displayed on the 
printer.
zzEnter the password displayed on the 
printer into the password field.
6 Use the camera to print.
zzUse the camera to select images and 
print.
zzOnce printing begins, the screen at left is 
displayed.
zzDo not disconnect the devices while this 
screen is displayed. Images may not be 
printed correctly or completely.
zzThe standby screen at left is displayed 
when the camera is no longer connected.
•	 Printing in progress cannot be canceled from SELPHY by using the  
button. Use the camera to stop printing.
•	 You can also connect the printer to a camera via an existing access point. In 
this case, connect the printer and camera to the same access point. For details 
on how to connect the printer to an access point, see “Connecting the\
 Printer 
to the Access Point” (=
  37).
•	 The printer does not enable communication between the devices connected \
to it.
Subsequent Printing
•	 Once you have completed the connection settings ( =  34 – 35), the 
second, standby screen in step 6 is displayed automatically when you 
turn on the printer. To print, after the standby screen is displayed, simply 
use the camera as described in steps 5 – 6.
•	 During standby-screen display, you can view the SSID and password by 
pressing the < o> button. You can also change the password on the 
screen displayed by pressing the EDIT button (=
  45).
•	 Even during standby, you can print images on a memory card by 
inserting the card to access the screen in step 4 on  =
  14.
  
						

							36
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Printing from a Computer
Confirming Access Point Compatibility
•	Before you can print via Wi-Fi from a computer, the computer with the 
images to send must be connected to an access point.
•	 Use an access point that supports the following Wi-Fi standards.  To 
check the standards your access point supports, refer to the access poin\
t 
user manual.
Standards IEEE 802.11b/g
Supported 
Channels 1 – 11
Transmission 
Methods DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g)
Security No security, 64- and 128-bit WEP (open system authentication), 
WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and 
WPA2-PSK (AES)
•	
Confirm that the access point supports WPS (Wi-Fi Protected Setup).
WPS-Compatible Access 
Points Connect as described in “WPS-Compatible Access 
Points” (=  37)*.
Non-WPS Access Points
Or WPS Support Unknown  Check the following information and connect as 
described in
 “Non-WPS Access Points” (=
  39)
.
- Network name (SSID/ESSID)
- Network authentication / data encryption (encryption 
method or mode)
-
 Password (network key)
*
 WPS connections are not possible for access points set up for WEP  security. Connect 
as described in “Non-WPS Access Points” (=  39).
•	 If your network is managed by a system administrator, ask the 
administrator for network setting details.
  
						

							37
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Connecting the Printer to the Access Point
How to connect varies depending on whether the access point is WPS-
compatible (=  37) or not (=  39).
WPS-Compatible Access Points
1 Check the access point.
zzConfirm that the access point is on and 
ready for communication.
2 Prepare SELPHY.
zzRemove any inserted memory cards or 
USB flash drives.
zzInsert a loaded paper cassette and an ink 
cassette in SELPHY (=  8 – 10).
3 Access the setting screen.
zzPress the  button.
zzPress the  buttons to select 
[Wi-Fi Settings], and then press the 
 button.
zzPress the  buttons to select 
[Connection Settings], and then press the 
 button.
4 Check the printer name.
zzCheck the displayed printer name and 
press the  button.
zzWhen you connect devices via Wi-Fi, 
this name will be displayed on the target 
device to identify the printer.
zzYou can change the printer name by 
pressing the EDIT button (=  44).
5 Choose the connection method.
zzPress the  buttons to select 
[Via Wi-Fi Network], and then press the 
 button.
  
						

							38
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
6 Choose the access point 
connection method.
zzPress the  buttons to select 
[WPS Connection], and then press the 
 button.
7 Choose the WPS connection 
method.
zzPress the  buttons to select 
[PBC Method], and then press the  
button.
zzThe screen at left is displayed.
8 On the access point, hold down 
the WPS connection button for 
a few seconds.
zzFor details on where the button is located 
and how long to press it, check the 
access point user manual.
9 Establish the connection.
zzOn the printer, press the  button.
zz[Connecting] is displayed on the printer, 
followed by [Connected to access point] 
when connected. Press the  
button.
zzThe screen at left is displayed, indicating 
the name of the access point.
•	 If you selected [PIN Method] in step 7, use the computer to specify the \
PIN 
code (displayed on the printer) on the access point, press the < o> button on 
the printer, and go to step 9. For instructions on configuring PIN codes, refer to 
the access point user manual.
•	 On SELPHY, wireless signal strength is indicated by the following icons.   
[
] High, [] Medium, [] Low, [] Weak, [] Out-of-range
  
						

							39
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Non-WPS Access Points
1 Check the access point.
zzConfirm that the access point is on and 
ready for communication.
2 Prepare SELPHY.
zzRemove any inserted memory cards or 
USB flash drives.
zzInsert a loaded paper cassette and an ink 
cassette in SELPHY (=  8 – 10).
3 Access the setting screen.
zzPress the  button.
zzPress the  buttons to select 
[Wi-Fi Settings], and then press the 
 button.
zzPress the  buttons to select 
[Connection Settings], and then press the 
 button.
4 Check the printer name.
zzCheck the displayed printer name and 
press the  button.
zzWhen you connect devices via Wi-Fi, 
this name will be displayed on the target 
device to identify the printer.
zzYou can change the printer name by 
pressing the EDIT button (=  44).
5 Choose the connection method.
zzPress the  buttons to select 
[Via Wi-Fi Network], and then press the 
 button.
  
						

							40
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
6 Choose the access point 
connection method.
zzPress the  buttons to select 
[Search for an access point], and then 
press the  button.
zzAccess points found nearby are listed.
7 Choose the access point.
zzPress the  buttons to select the 
access point, and then press the  
button.
8 Enter the password.
zzPress the EDIT button to access the input 
screen, and then enter the password 
(=
  45).
zzPress the  button.
9 Check the access point.
zzOnce the printer is connected to the 
access point, the screen at left is 
displayed. Check the indicated access 
point name and press the < o> button.