Canon Selphy Cp800 User Guide

							31
 OEven when the Ready screen is displayed, you can insert the memory card \
 p.  13 to display the screen in 
Step 4 and print images in the card. 
 O You can stop displaying the Ready screen when you turn the power on by se\
lecting [Disable Wireless 
LAN] in [Comm. Mode] (p.  41).    
Printing on Square Stickers
 OYou can print square images on stickers using Color Ink Cassette/Square L\
abel Set KC-18IS  (p.  2). OSpecify borderless printing in the smartphone's application (the [Borde\
rs] setting on SELPHY will be 
ignored).
Printing in Infrastructure Mode
You can connect wireless LAN ready devices such as smartphones, cameras, \
and computers to a wireless 
LAN to print images.
Checking Wireless LAN Settings
 OIn order to use a wireless LAN in infrastructure mode, you need to conne\
ct a wireless parent station 
(wireless router, etc.) acting as the access point and a device that transmits images (smartphone, camera, 
computer, etc.). Any wireless parent stations such as wireless routers are called "access points" in this 
guide.
 OSome cameras can be used as an access point. Refer to the user guide sup\
plied with your camera. OSelect wireless LAN standards compliant devices listed on  p.  52 for your access point.  Refer to the user 
guide supplied with your access point for information on how to check.
 O Check if your wireless LAN is WPS (Wi-Fi Protected Setup) compatible. If you are not sure whether or not 
it is WPS compatible, also check the following items.
 -Network name (SSID/ESSID) -Network authentication/data encryption (encryption method/encryption mode)* -Encryption key (network key)* Supported security settings are [No security], [WEP (open system authentication) (64-bit)], [WEP (open system 
authentication) (128-bit), [WPA-PSK (TKIP)], [WPA-PSK (AES)], [WPA2-PSK (TKIP)], and [WPA2-PSK (AES)].
 O If your network is managed by the system administrator, request details of network settings from 
the administrator.
Connecting the Printer to the Wireless LAN
You can connect the printer to the wireless LAN and print from your smart\
phone, camera, or computer via the 
access point.
This section describes how to connect a printer to a wireless LAN using a camera as the access point; 
however, the same procedure applies when you are printing from a smartphone or \
computer.
Items to Prepare
 OA device that can be used as an access point* OA device that transmits images (smartphone, camera, or computer connected to the access point)** A camera is used as the access point as well as the transmitter in this example.
Prepare the access point.
 OConfigure a camera as the access point. Refer to the 
user guide supplied with your camera.
 OIf you are using an access point other than a camera, 
check that the device is turned on and able to 
communicate.
1

COPY  
						

							32
Select the wireless LAN mode.
 ODisplay the screen on the left by carrying out Steps 2 to 
4 described on  p.  29. OPress the ud buttons to select [Infrastructure], and 
then press the o button.
Select the connection method.
 OPress the ud buttons to select [Search for an access 
point], and then press the o button.
 XA list of access points found nearby is displayed.
Select the access point.
 OPress the ud buttons to select the access point, and 
then press the o button.
Enter the encryption key.
 OPress the EDIT button to display the screen to enter 
characters and enter the encryption key  (p.  42). OPress the o button.
2
3
4
5

COPY  
						

							33
Check the access point.
 OThe screen on the left is displayed when you are 
connected to the access point. Check the displayed 
access point name and press the  o button.
 XThe screen on the left is displayed.
Print.
 OPrint the image from the camera. OIf you are printing from a smartphone, install the 
designated application, connect the smartphone to the 
access point, and print.
 OIf you are printing from a computer, install the supplied 
software (p.  37) and print. XThe screen on the left is displayed when printing starts. 
Do not shut down the communication and do not cancel 
printing while this screen is displayed. The printing result 
may be incomplete or incorrect.
 O Select an access point on which security is not set in Step 4 and press \
the  o button to display the screen for 
Step 6.
 O Up to 20 access points can be displayed. If you cannot find the access point you want to connect to, press the 
v button and select [Manual Settings] in Step 3 described on  p.  32 to specify the access point manually. Follow 
the instruction on the screen to enter the SSID, security settings, and \
encryption key  (p.  42). OOn the screen, wireless signal strength is indicated by the following ic\
ons. 
[] high, [] medium, [] low, [] weak or no service
Printing for the Second Time
 OOnce you have configured settings, the second screen in Step 6 (Ready screen) is displayed when you 
turn the power on. If you could not connect to the specified wireless LAN for some reason such as the 
access point being turned of
f, the Ready screen with "Reconnect" displayed at the bottom appears. Check 
the access point setting and press the  o button to try again.
 OEven when the Ready screen is displayed, you can insert the memory card \
 p.  13 to display the screen in 
Step 4 and print images in the card. 
 O You can stop displaying the Ready screen when you turn the power on by se\
lecting [Disable Wireless 
LAN] in [Comm. Mode] (p.  41).
 OIf you failed to connect to an access point to which you had once connec\
ted, check the channel 
setting on the access point  (p.  51).
6
7

COPY  
						

							34
Printing on Square Stickers
 OYou can print square images on stickers using Color Ink Cassette/Square L\
abel Set KC-18IS  (p.  2). OSpecify borderless printing in the smartphone's application or on the ca\
mera when printing on square 
stickers (the [Borders] setting on SELPHY will be ignored except when the border setting on the camera is 
at its default).
Using a WPS Compatible Access Point
You can connect the printer to the wireless LAN easily when your access p\
oint is WPS compatible.
Select the connection method.
 ODisplay the [Connection Method] screen in Steps 1 to 2  
described on  pp.  31 –  32, press the ud buttons, 
select [WPS Connection], and then press the  o button.
Select a setting method.
 OPress the ud buttons to select [PBC Method] and 
press the o button.
Connect to the access point.
 OCheck that the screen on the left is displayed on the 
printer and then press and hold the button for WPS 
connection on the access point for a few seconds.
 OPress the o button on the printer. O[Connecting...] is displayed on the printer screen, and 
then [Connected to access point] is displayed when 
connected. Press the o button.
1
2
3

COPY  
						

							35
Print the images.
 OWhen connected, the screen for Step 6 described on 
p.  33 is displayed. Print as described in Steps 6 to 7.
 O If you have selected [PIN Method] in Step 2, specify the PIN code displa\
yed on the printer to the access point, 
press the o button on the printer, and proceed to Step 3.
Printing Images from Your Computer
If you connect your computer to SELPHY and use the supplied software, you can view all images at once and 
take advantage of various printing functions that cannot be done with ju\
st SELPHY alone.
Select favorite images from an index and print
 OYou can select images you wish to print from an index, and print them all at 
once. You can also add text to your images and print.
Print with decorations
 OYou can add frames or stamps to your images and print. You can also add 
text to your images and print.
Print calendars
 OYou can add calendars to your prints. You can also add text to your images 
and print.
Arrangement printing
 OYou can arrange multiple images on the same sheet.
ID photo printing
 OYou can print in the size required for ID photos.
 OThe ID photo may not be accepted officially, depending on the institution the ID photo is required 
for. Please contact the appropriate institution for regulation details.
4

COPY  
						

							36
Checking the Computer and Wireless LAN Environment
Computer environment
WindowsMacintosh
OS Windows 7 Service Pack 1*
1*2Mac OS X v10.6.8 -  v10.7*1
ConfigurationThe above OS is preinstalled
CPU Pentium 1.3 GHz or higher Mac OS X v10.7: Intel Core2 Duo  or  higher
Mac OS X v10.6: Intel processor
RAM Windows 7 (64-bit): 2 GB or more
Windows 7 (32-bit): 1 GB or more 1 GB or more
Interface USB, wireless LAN
An IEEE 802.11b/g compliant access point is required*
3
Free Hard Disk 
Space120 MB or more*4140 MB or more
Display 1,024 x 768 pixels or more
*1 If you are connecting with a USB cable  (p.  45), you can also use Windows Vista Service Pack 2 (RAM 1 GB or 
more), Windows XP Service Pack 3 (RAM 512 MB or more), and Mac OS X v10.6  or later.
*
2 Windows 7 Starter and Home Basic are not supported*3. Download Windows Media Feature Pack from the 
Microsoft Support page and install if you are using Windows 7 N (EU version) or Windows 7 KN (Korean version). 
For details, refer to the following web page.
 http://go.microsoft.com/fwlink/?LinkId=159730
*3 Except when connecting using a USB cable  (p.  45).
*4 For Windows, Microsoft .NET Framework 2.0 (max. 280 MB) or higher must be installed. Installation may take 
some time depending on your computer’s capabilities.
Wireless LAN environmentRefer to p.  26 and  31 to check wireless LAN settings.

COPY  
						

							37
Install the software
Windows 7 and Mac OS X 10.7 are used for these explanations.
Items to Prepare
 OComputer OSupplied CD-ROM (SELPHY CP900 Solution Disk)  (p.  2)
Windows
Connect SELPHY to the wireless LAN.
 OConnect SELPHY to the wireless LAN as described in 
“Connecting the Printer to the Wireless LAN”  (p.  31). OCheck that the screen on the left is displayed on 
SELPHY.
Install the software.
 OPlace the CD-ROM in the computer’s CD-ROM drive 
and click [Easy Installation] when the screen on the left 
appears.
 OFollow the on-screen instructions to proceed. OIf the User Account Control window appears, follow the 
on-screen instructions to proceed.
 OWhen the screen to select the connection method (on the 
left) is displayed, select [Use with a wireless network], 
and then click [Next].
 OIf a message [Windows can't verify the publisher of this 
driver software] is displayed, click [Install this driver 
software anyway].
 OWhen the installation finishes, click [Restart] to restart 
the computer.
1
2

COPY  
						

							38
Macintosh
Install the software.
 OInsert the CD-ROM in the computer’s CD-ROM drive. 
Click [Finder] in the Dock (the bar at the bottom of the 
desktop) and double click [ 
 ] in the CD-ROM. OIf [  ] is displayed on the desktop, you can also double-
click [  ] to display files in the CD-ROM. O When the screen on the left appears, click [Install] and 
follow the on-screen instructions to proceed.
 OWhen the installation finishes, click [Yes] to restart the 
computer.
Connect SELPHY to the wireless LAN.
 OConnect SELPHY to the wireless LAN as described in 
“Connecting the Printer to the Wireless LAN”  (p.  31). OCheck that the screen on the left is displayed on 
SELPHY.
Register the printer.
 OSelect [  ] from the menu, and click [System 
Preferences] r [Print & Fax] to open the [Print & Fax] 
screen. Click [+] to select the printer name (pp. 
 29,  41) 
from the pop-up window, then click [Add].
 O For details on handling the computer, refer to the user guide included with your computer.
1
2
3

COPY  
						

							39
Printing Images with the Software
You can print images saved on the computer using the installed software (SELPHY Photo Print).
The [Simple print] feature will be explained in this section. Using this feature, you can view all your images at 
once and select which ones you want to print.
Make sure that a memory card is not inserted 
in SELPHY, and a USB cable is not connected 
to SELPHY.
Start the software.
Windows
 OClick the [Start] menu r [All Programs] r [Canon 
Utilities] 
r [SELPHY Photo Print] r [SELPHY Photo 
Print].
Macintosh
 O Click the [SELPHY Photo Print] icon in the Dock (the bar 
at the bottom of the desktop).
Display the print menu.
 OClick [Print menu]. OIf printing preparations are not complete (paper cassette 
and ink cassette inserted), you cannot click [Print 
menu]. Follow the on-screen instructions to perform the 
necessary operations.
Select a print method.
 OClick [Simple print]. OYou can make prints with frames, stamps, and speech 
balloons by clicking [Decoration print].
 OYou can make prints with calendars added by clicking 
[Calendar print].
 OYou can print multiple images on the same sheet by 
clicking [Layout Print].
 OYou can print in the size required for ID photos by 
clicking [ID Photo Print].
1
2
3
4

COPY  
						

							40
You can display images saved in another folder by clicking 
this button and selecting a folder from the screen that 
appears.
You can select the criteria for images 
to display.
Select an image.
 XImages will display in an index within the [Pictures] 
folder.
 OClick an image to select for printing. XThe background color changes and the 
image is set for printing.
 OUse the same procedure to click all images 
you want to print.
 OIf you click an image again, the background 
color switches back to the original color 
and the settings are canceled.
 OOnce images are selected, click [Next].
Click the - or + button to set the 
number of copies.
Select the number of prints.
 OSelect the number of copies for each image. OFor Windows, click [Print] to start printing. OFor Macintosh, click [Print menu], then click [Print] in the 
screen that appears.
 ODo not shut down the communication until printing 
is complete. If you shut down the communication 
prematurely, the printing result may be incomplete or 
incorrect.
End the program.
Windows
 OWhen all printing is finished, click  at the top right 
corner of the screen.
Macintosh
 O When all printing is finished, click  at the top left corner 
of the screen.
 O The layout image shown in the right side of the screen that is displayed\
 when you click [ID Photo Print] in Step 
4 on p.  39 differs from the actual layout. You can check the actual layout by clicking [Preview] in the [4.Print] 
screen.
 O If you select an index layout in the screen that is displayed when you click [Layout Print] in Step 4  on  p.  39, then 
you cannot adjust the image, such as changing the size or orientation of\
 the image in the [4.Print] screen.
5
6
7

COPY