Canon Selphy Cp800 User Guide

							11
Setting the Display Language
You can change the language displayed in the LCD monitor menus and messag\
es. The default setting is 
English.
Turn on SELPHY.
 OPress and hold the  q button until the screen shown on 
the left is displayed. 
 O To turn the power off, press and hold the q button and 
release when the screen display changes.
Approx. 45°
Raise the screen (LCD monitor).
 ODo not raise the LCD monitor more than 45° as this may 
result in damage or malfunction.
Display the settings screen.
 OPress the k button. OPress the ud buttons to select [Change Settings], and 
then press the o button.
Display the language settings screen.
 OPress the ud buttons to select [Language], and then 
press the o button.
Select a language.
 O PPress the udlr buttons to select a language, and 
then press the o button. 
 OYou can go back to Step 2 if you press the v button 
twice.
1
2
3
4
5

COPY  
						

							12
Memor y Cards You Can Use
Memory Cards That Can be Used Without an AdapterMemory Cards That Require an Adapter (commercially  available)
 OSD Memory Card OSDHC Memory Card OSDXC Memory Card 
 OMultiMediaCard OMMCplus Card OHC MMCplus Card
 OminiSD Memory Card OminiSDHC Memory Card 
 OmicroSD Memory Card OmicroSDHC Memory Card OmicroSDXC Memory Card ORS-MMC Card * OMMCmobile Card OMMCmicro Card
* “RS-MMC” is an abbreviation of “Reduced-Size Multi Media Card\
”.
 O For memory cards that require an adapter, be sure to first insert the memory card into the adapter 
before inserting into the appropriate card slot.  
If you insert the memory card into a card slot without using an adapter, you may not be able to 
remove the memory card from the printer.
 OUse a memory card formatted in the device used for taking the images. A memory card formatted 
on a computer may not be recognized.
 O Refer to the user guide included with your memory card and adapter for h\
andling instructions.
About USB Flash Memor y
You can print images on a commercially available USB flash memory by connecting it to SELPHY (p.  15).
Images That Can Be Printed
JPEG images conforming to the Exif standard can be printed with SELPHY .
 OIrregularly sized images, or images that have been edited on a computer \
may not display or print properly.

COPY  
						

							13
Selecting and Printing Images
You can select an image and specify the number of copies for printing. In\
 this section, an SD memory card 
will be used as an example, but you can print from other memory cards using the same steps.
Turn on SELPHY.
 OPress and hold the  q button until the screen shown on 
the left is displayed. 
 O To turn the power off, press and hold the q button and 
release when the screen display changes.
Approx. 45°
Raise the screen (LCD monitor).
 ODo not raise the LCD monitor more than 45° as this may 
result in damage or malfunction.
Label side
Insert the memory card into the slot.
 OInsert the card faced as shown in the illustration until it 
clicks.
 OTo remove the card, push it in until it clicks and release 
your finger slowly.
 XThe screen in Step 4 below (image display screen) 
(p.  7) will be displayed.
Number of copies for the  
displayed image
Number of copies
Select an image.
 OPress the lr buttons to select an image to print. OEvery 5th image will be displayed if you press and hold 
the lr buttons.
Select the number of copies.
 OPress the ud buttons to select the number of copies. OIf you press and hold the ud buttons, the number 
increases or decreases by 5 copies.
 OTo print another image at the same time, repeat Steps 4 
and 5.
1
2
3
4
5

COPY  
						

							14
Print.
 OPress  the p button to start printing. ODuring printing, the paper will pass in and out from the 
back of SELPHY several times. Do not touch the paper 
until printing has finished and the printed sheets collect 
on the print output tray (on the outer lid of the paper 
cassette).
 ODo not let 19 or more printed sheets collect on the print 
output tray.
 ODuring printing, always press the  v button to cancel 
printing.
Insert the paper.
 O If the paper out message is displayed on the screen, pull 
the paper cassette out from SELPHY without turning off 
the power.
 ORefill the paper cassette with new paper  (p.  8) and 
reinsert the cassette into SELPHY (p.  10).
Change the ink cassette.
 O If the ink out message is displayed on the screen, open 
the ink cover without turning off the power.
 OThe ink cassette will come out if you move the lock in 
the direction shown in the illustration. Insert a new ink 
cassette (pp. 
 7,  10).
 ONever pull out the paper cassette, open the ink cassette compartment cov\
er, or remove the 
memory card while you can hear the printer’s operation sounds immediately after turning on the 
printer, or during printing. 
This may damage the printer.
 OPress the v button to cancel printing. You cannot cancel printing by pressing

 the power button 
and the printer could be damaged if you unplug it to disconnect power.
 O It may take some time before images are displayed on the screen in Step \
4 if the memory card contains a large 
number of images.
 OIf the [DPOF images remain] screen is displayed, refer to “Printing Images Using Digital Camera Specified 
Settings (DPOF Print)” (p . 46). OYou can specify up to 99 images in Step 4 and up to 99 copies per image i\
n Step 5. However, the total number 
of copies cannot exceed 999.
 OThe printer does not stop printing until it finishes the page being printed even if you press the  v button to 
cancel printing.
Avoiding Incomplete Photos
Note the following to avoid wasted remaining paper due to the ink sheet \
running out before completing a 
photo print.
 O Do not turn the sprocket too much when tightening the ink sheet  (p.  7). OAlways press the v button when you 

want to cancel printing and never turn off the power before pressing 
the v button (Step 6).
 O If the paper out message is displayed on the screen, refill the paper without turning of f the power and 
without removing the ink cassette (Step 7), or press the  v button to cancel printing (Step 6).
Depending on print conditions, you may not be able to avoid incomplete p\
hoto prints due to the ink sheet 
running out in some cases even if you follow the above instructions.
6
7
8

COPY  
						

							15
Printing From USB Flash Memor y
Just like images on memory cards, images on commercially available USB flash memory can also be printed.
Insert a USB flash memory.
 OInsert a USB flash memory as shown. OAll further steps are the same as those used for printing 
images from memory cards  (pp.  13 –  14).
 ODepending on the brand of USB flash memory used, it may be difficult to insert or remove, and it may not 
operate properly.
 ORefer to the user guide included with your USB flash memory for operating instructions.
Printing 1 Copy of  the Selected Image
You can print 1 copy of the selected image with simple operation.
Select and print an image.
 OSelect the image as described in Steps 1 to 4 on  p.  13. OPress the p button to print 1 copy of the selected 
image.
 OIf you have specified the image and the number of copies in Steps 4 to 5 on  p.  13, SELPHY 
will print as specified even if you carry out the above operations.  Therefore, make sure that the 
number of copies is "0" in Step 4 on  p. 
 13 before trying this operation.
Printing on Square Stickers
 OYou can print square images on stickers using Color Ink 
Cassette/Square Label Set KC-18IS  (p.  2). OSet [Borders] to [ Bordered] (p.  21).
 O
If the image is not square, the image may not fit into the sticker or may leave margins.  

COPY  
						

							16
Printing All Images
You can print all images on a memory card at once.
Display the menu.
 OPress the k button.
Display the settings screen.
 OPress the ud buttons to select [Print All Images], then 
press the o
 button.
Number of 
sheets required
Number of 
images on card Number of copies
Select the number of copies.
 O
Press the ud buttons to set the number of copies.
Print the images.
 OPress the p button to start printing. OTo cancel printing, press the  v button.
 OIf there are 1000 or more images on the card, only 999 copies will be pr\
inted in order of the most recent by 
shooting date.
 OYou can specify up to 99 copies in Step 3. However, the total number of copies cannot exceed 999.   
(For example, you can specify up to 9 copies when you have 100 images in the card.)
1
2
3
4

COPY  
						

							17
Storing the Printed Photos
 OWhen both edges of a print have perforations, you can remove the edges 
by bending them.
 OUse an oil-based pen to write on prints. OTo prevent discoloration, do not store prints in places subject to 
temperatures of over 40 °C (104 °F), humid or dusty places, or in direct 
sunlight.
 OAvoid the following actions as they may result in color change, color 
fading or color bleeding: Sticking any type of adhesive tape on a print \
surface, allowing print surfaces to come into contact with vinyl or plas\
tic, 
applying alcohol or other volatile solvents to a print surface, or leavi\
ng the print surface tightly pressed 
against other surfaces or objects for prolonged periods.
 OIf you wish to mount prints in an album, select an album with photo cove\
rs made of nylon, polypropylene 
or cellophane.
 OColor may change over time or depending on storage conditions. Canon ass\
umes no liability for 
color changes.
Cleaning Up After Printing
 Turn off SELPHY (p.  11), then remove the memory card or USB flash memory. Lower the screen (LCD monitor) flat for storage. Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY. OIf the compact power adapter is hot, wait until it has cooled down befor\
e you store it. Remove the paper cassette and close the paper cassette compartment cover. Keep the remaining paper 
inside the cassette and store the cassette in a dark, cool, and dry plac\
e free from dust.
 OKeep the ink cassette inside SELPHY. OStore SELPHY horizontally, in a dark place free from dust. Dust and dirt may cause white lines on\
 
photos or damage the printer.
 OWhen you have more than one ink cassette, keep one inside SELPHY, and keep the other inside 
the original packaging or a bag to protect it from dust, and store it in\
 a dark place.
 OWhen storing new paper and ink cassettes, leave them in unopened package\
s, and keep them in 
a dark place.
Maintaining the Printer
To prevent dust and dirt from causing lines on photos and to ensure the p\
rint quality, clean SELPHY regularly 
using the supplied cleaner unit  (p.  2) before printing and when changing the ink cassette. Note that the 
cleaning unit may not be included in some regions.
Cleaning SELPHY.
 O Remove the ink cassette if it is inserted. OInsert the cleaner unit with the arrow side up as shown 
fully and then pull out. Repeat this several times.
 OStore the cleaner unit in a bag to prevent dust after 
cleaning.
 ODo not touch the white part of the cleaner unit as it will not clean as \
effectively. ODo not use any cleaning kits other than the supplied cleaner unit. Doing\
 so may cause the printer 
to malfunction.
 OIf lines still appear on photos after cleaning, contact a Canon Customer\
 Support Help Desk.

COPY  
						

							18
Cropping and Printing Images
You can crop and print part of an image.
Display the cropping screen.
 OSelect an image as described in Step 4 on  p.  13, press 
the EDIT button, and then press the o  button. 
 XA cropping frame to indicate the range will be displayed.
Determine the range.
 OThe cropping frame switches between portrait and 
landscape each time you press the EDIT button.
 OYou can move the cropping frame by pressing the 
udlr buttons.
 OYou can enlarge the cropping frame by pressing the  - 
button and shrink it by pressing the  0 button.
Make the setting.
 OWhen you press the o button, the cropping range is set 
and the screen returns to the image display screen with 
 displayed at the bottom left. OTo crop another image and print at the same time, repeat 
Steps 1 to 3.
Print the images.
 OPrint as described in Step 6 on  p.  14. XThe cropping range is cleared when printing is finished.
 O If you want to change the cropping range after setting it, press the EDI\
T button in the image display screen, 
press  the ud buttons to select [Adjust Cropping], and press the  o button to repeat Steps 2 to 3.
 OIf you want to cancel the cropping range after setting it, press the EDI\
T button in the image display screen, press 
the ud buttons to select [Reset Cropping], press the o

 button to display the reset cropping screen, and then 
press the o button again.
 O The cropping ranges are all cleared if you turn SELPHY off or remove the memory card before printing them. OYou can set up to 99 images with cropping ranges. OYou cannot crop images when you are printing with [Print All Images] or [DPOF Print], or you have selected [ Index] 
or [ shuffle] in [Page Layout] (p.  22). O You cannot change the vertical and horizontal ratio of the cropping frame\
 on the screen. OYou can change the number of copies by pressing the  ud buttons in the image display screen in Step 3. The 
cropping range setting is not cleared by setting the number of copies to\
 0.
1
2
3
4

COPY  
						

							19
Printing ID Photos
You can print your image as an ID photo. You can 
select the size from [Multi-size], [Standard]*, and 
[Custom].
Also, you can select up to 2 types of images to be 
printed on 1 sheet.
* The Standard size conforms to the ICAO international 
standards.
Set to print ID photos.
 OPress the k button. OPress the ud buttons to select [ID Photo], and then 
press the o button.
Specify the ID photo size.
 OPress the lr buttons to select the size, and then press 
the o button.
 OIf you have selected [Custom], press the ud buttons to 
select [Long Side], press the lr buttons to specify the 
length, then specify the length for [Short Side], and then 
press 

o again. The values which can be specified in 
[Short Side] change automatically according to the value 
you have specified in [Long Side].
 O If you have selected [Multi-size], the size of the image to 
be printed is displayed.
Select and print the images.
 OSelect the image by pressing the  lr buttons, and press 
the u button.  is displayed at the bottom right of the 
screen (up to 2 images).
 O Press the EDIT button to set the cropping range (p.  18). OPrint as described in Step 6 on  p.  14. XSettings are cleared when printing is finished.
 O The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please 
contact the appropriate institution for regulation details.
 OYou cannot use card size paper. O[Borders] settings will be ignored. Also, the date is not printed. OIf you have selected 2 types of images in Step 3, these 2 types are prin\
ted in equal numbers for the number of 
columns in the layout. If you have selected 2 types of images and the nu\
mber of columns is an odd number, 
nothing will be printed in the center column.
Crop the image for the passport.
 OIf you display the cropping range  (p.  18) while the 
[Standard] size is selected for [ID Photo], 2 lines are 
displayed.
 O Adjust so that one line is at the top of the head and the 
other line is under the chin to print a passport photo 
conforming to the passport standards.
 O Please contact the appropriate institution for regulation details other \
than regarding position and size of the face.
1
2
3

COPY  
						

							20
Printing a Variety of  Images
You can use various printing features, such as imprinting the shooting da\
te or adjusting the color of an image. 
You do not need to make settings for each image because once the settings\
 are made, they are applied for 
all images.
Making Settings
Display the settings screen.
 OPress the k button. OPress the ud buttons to select [Change Settings], and 
then press the o button.
Select the item and change the settings.
 OPress the ud buttons to select an item. OPress the lr buttons to change the settings, then press 
the v
 button to complete the setting.
 OPressing the v button again will restore the image 
display screen.
 ORefer to pp.  21 –  24 for information about each setting.
Print.
 OSelect an image for printing  (p.  13) and the number of 
copies (p.  13), and then press the p button to print.
1
2
3

COPY