Canon Selphy Cp780 User Guide

							
11

Do not handle the power cords with wet hands.
Installing the color ink cassette and the Paper Cassette
1Open the covers.
Open the covers for the color ink cassette and 
paper cassette compartments. 

2Insert the color ink cassette.
Insert the color ink cassette as shown in the 
illustration until it clicks and locks.
Close the compartment cover.


3Insert the paper cassette.
Make sure that the outer lid is open. (p. 10)  
Insert the paper cassette as shown in the 
illustration all the way into the compartment.

1Plug the cord into SELPHY.
Fully insert the adapter plug into SELPHY.
Connect the power cord.
Connect the power cord to the compact power 
adapter, then plug the other end into a power 
outlet.
2
Connecting SELPHY

C
O
P
Y  
						

							
12

You can change the language displayed in the LCD monitor menus and messag\
es.
1Display the setting screen.
Press the m(MENU) button.
Press the u or d buttons to select [Printer 
Setup], then press o.


Setting the Display Language
3Select a language.
Press the u , d , l or r buttons to select a 
language, then press o.
Pressing the m(BACK) button twice will restore 
the image display screen.


2Display the language setting screen.
Press the u or d buttons to select [Language].
Press o.



C
O
P
Y  
						

							
13

Printing Images
You can print images on a memory card when it is inserted into SELPHY.
Memory Card Slots(SELPHY memory card slots)
Memory Cards That Can be  Used Without an AdapterMemory Cards That Require an Adapter (commercially available)
 CompactFlash Card   Microdrive
 
 xD-Picture Card*1
 
 SD Memory Card	 MMCplus Card miniSD Card	 HC MMCplus Card  SDHC Memory Card	 MMCmobile Card  miniSDHC Card	 RS-MMC Card*2
 MultiMediaCard microSD Card  microSDHC Card  MMCmicro Card
 
 Memory Stick  Memory Stick PRO  Memory Stick Duo  Memory Stick PRO Duo
 Memory Stick micro
*1 Purchase the CompactFlash Card Adapter for xD-Picture Card.  *2 Reduced-Size MultiMediaCard
For memory cards requiring an adapter, be sure to first insert the memory card into the adapter before inserting the adapter into the appropriate card slot. If you inse\
rt the memory card into a card slot without using an adapter, you may not be able to remove the memory card from SELPHY.Use a memory card formatted in the device used for taking the images. A memory card formatted in the computer may not be recognized.


Refer to the user guide included with your memory card and adapter for h\
andling instructions.
Compatible Memor y Cards
The following image types can be printed with SELPHY. 
JPEG type data conforming to the Exif standard.
Irregularly sized images, or images that have been edited on a computer \
may not display or print properly.

Images that Can Be Printed

C
O
P
Y  
						

							
1

You can select an image and specify the number of copies for printing. SD\
 memory cards will be used 
as an example.
Selecting and Printing Images
1Turn on the power. 
Press and hold the q button until the screen on 
the left displays. 
To turn the power off, press and hold the q 
button again until the screen on the left displays.


2Insert a single memory card into the slot.
Insert a single memory card containing the 
images you want to print all the way into the 
appropriate memory card slot.
The screen in Step 3 appears.  


Label side
Select an image.
Press the l or r buttons to select an image to 
print. 
If you hold the l or r buttons pressed, the 
display jumps by 5 images. 


Select the number of copies.
Press the u or d buttons to select a value.
If you hold the u or d buttons pressed, the 
number increases or decreases by 5 copies.
You can specify 99 copies per image (or a total 
of 999 copies). 
To print another image, repeat Steps 3 and 4.




4
3
Number of copies of the displayed image
Total number of prints(Number of sheets required)

C
O
P
Y  
						

							
1

Print.
Press the p button to start printing.
During printing, the paper will pass in and out 
from the back of SELPHY several times. Do not 
touch the paper until printing has finished and 
the printed sheet collects on the print output tray 
(on top of the paper cassette).
Do not let 19 or more printed sheets (13 or more 
for Wide size) collect on the print output tray.
To cancel printing, press the m(BACK) button.




5
Insert the paper.
When the paper is depleted, remove the paper 
cassette from SELPHY.
Refill new paper, and reinsert the paper cassette 
into SELPHY (p. 11).


6
Never pull out the paper cassette, open the color ink cassette cover or \
remove the memory card during printing or directly after turning on the printer.  This may cause the printer to malfunction.
When the total number of copies (p. 14) is set to 0 and you press the p button, the currently displayed image will print once.
7Change the color ink cassette.
When the color ink is depleted, open the color 
ink cassette compartment cover and move the 
lock as shown in the illustration. The color ink 
cassette will be ejected.
Insert a new color ink cassette (p. 11).



C
O
P
Y  
						

							
1

You can print all images on a memory card at once.
Printing All Images
3Select the number of copies.
Press the u or d buttons to set the number of 
copies.
You can specify 99 copies per image (or a total 
of 999 copies).  


Total number of prints (Number of sheets required)
1Display the menu.
Press the m(MENU) button.
2Display the setting screen.
Press the u or d buttons to select [Print All 
Images], then press o.

Number of copies
Print.
Press the p button to start printing.
To cancel printing, press the m(BACK) button.


4

C
O
P
Y  
						

							
Storing the Printed Photos 
When both sides of a print have perforations, you can remove the edges b\
y bending them.
Use an oil-based pen to write on prints.
Avoid storing photos in places with high temperatures (40°C/104°F \
or higher), places with high 
humidity or dust, or places subject to direct sunlight. 
Avoid actions that may result in color change, color fading or color blee\
ding, such as the following: 
Sticking any type of adhesive tape on a print surface, allowing print su\
rfaces to come into contact 
with vinyl or plastic, applying alcohol or other volatile solvents to a \
print surface, leaving print 
surfaces tightly pressed against other surfaces or objects for prolonged\
 periods.
If you wish to mount prints in an album, select an album with photo cove\
rs made of nylon, 
polypropylene or cellophane.
Color may change over time or depending on storage conditions. Canon ass\
umes no liability for color changes.





1
After you finish printing, follow the steps below for cleaning and storing SELPHY .
Turn the power off (p. 14).
Unplug the power cord from the power outlet and disconnect the adapter p\
lug from SELPHY.
If the compact power adapter is hot, wait until it has cooled down befor\
e you store it.
Remove the memory card and paper cassette and close the paper cassette c\
ompartment cover. 
Keep the remaining paper inside the cassette and store the paper cassett\
e so that it is protected 
from dust and light. Also, do not unpack paper before it is used, and keep it in a dark place\
.
Keep the color ink cassette inside SELPHY. If you store the color ink cassette outside SELPHY, put 
it in a bag so that dust does not stick to the sheet.
Store SELPHY flat so that dust does not enter.






Cleaning Up After Printing
If dust enters SELPHY and sticks to the paper or color ink, print quality deteriorates.

C
O
P
Y  
						

							
1

Printing a Variety of  Images
You can use various printing features, such as imprinting the shooting da\
te or adjusting the color of 
an image. You even do not need to repeat the settings for each image because once t\
he settings are 
made, they are applied for all images.
Inserting the Date 
You can print images with the shooting date showing on the lower right. S\
ince the date printed will be 
the date the image was recorded by the camera, it cannot be changed on S\
ELPHY.
1Display the menu.
Press the m(MENU) button.
2Display the setting screen.
Press the u or d buttons to select [Print 
Settings], then press o.

3Setting [Date] to [On].
Press the u or d buttons to select [Date] .
Press the l or r buttons to select [On] .
Pressing the m(BACK) button twice will restore 
the image display screen.
Select an image and print (p. 14).
The printed image will show the shooting date 
on the lower right.





You can change the ordering for the date in [Date Format] in [Printer Set\
up] (p. 28).Depending on the layout (p. 19), imprinting the date may not be possible. Select [Info Display] and set to [On]. Check the print settings that are now displayed (p. 28).

05/05/2009

C
O
P
Y  
						

							
1

Various Functions 
In addition to the date imprint feature, SELPHY has a variety of other functions.*Default setting
 Changing the Color Tone and Printing (My Colors)
You can change the look of an image to sepia or black and white.
 Off*– Positive FilmIntense, natural colors like those obtained with positive film
 VividEmphasizes the contrast and color saturation for a vivid impression SepiaTones the image into sepia
 NeutralTones down the contrast and color saturation for neutral hues B/WBlack and white
The image position cannot be specified. Depending on the layout, other settings may be canceled. Select [Info Di\
splay] and set to [On]. Check the print settings that are now displayed (p. 28).
 
If you select [Print All Images] in [Index] (p. 16), you can print all images on a memory card as an index print.


  Correcting Red Eyes and Printing (Correct Red-Eye) 
Correct images with red-eye.
 Off* /   On


Red-eye may not be automatically detected or optimally corrected when fa\
ces appear extremely small, large, dark or bright in relation to the overall image, with face\
s turned to the side or at a diagonal, or faces with a portion hidden.Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [On] only when printing images with red-eye.
 
If you set [Page Layout] to [Index], red-eye will not be corrected.



 1-up*– 8-upPrint eight images on one sheet
 2-upPrint two images on one sheet IndexPrint as index
 4-upPrint four images on one sheet
 Choosing a Layout and Printing (Page Layout)
Set the number of images that you want to print 
on one sheet. The number of images that you 
specified (p. 14) will be printed in the layout set.
Set the layout to 8-up  when using color ink 
cassette/label set KC-18IL (8-label sheet) (p. 4).



C
O
P
Y  
						

							
20

 Getting the Best Results with Auto Correction (Image Optimize)
Dark images will be adjusted to the proper 
brightness. At the same time, people’s faces, 
and overall brightness will be adjusted.
 Off /   On*


 Printing With or Without Border (Borders)
Set images to print with or without a border.
 Borderless* /   Bordered


Some images may not be adjusted correctly.
Setting Various Functions
Set the functions introduced in the “Various Functions” section. (p. 19) You can set various functions 
using the same operation. 
Display the settings screen.
Press the m(MENU) button.
Press the u or d buttons to select [Print 
Settings], then press o.


1
Select the item and change the settings.
Press the u or d buttons to select an item.
Press the l or r buttons to change the 
settings, then press the m(BACK) button to make 
the setting.
Pressing the m(BACK) button again will restore 
the image display screen.



2

C
O
P
Y