Canon Selphy Cp770 User Guide

							
1

Compact Power Adapter CA-CP  00
Rated Input100 – 240 V AC (50/60 Hz)1.5 A (100 V) – 0.75 A (240 V)
Rated Output24 V DC, 2.2 A
Operating Temperatures0 – 45°C (32 – 113°F)
Dimensions122.0 x 60.0 x 30.5 mm (4.80 x 2.36 x 1.20 in.)(excluding power cord)
WeightApprox. 310 g (10.9 oz.)
Battery Pack NB-CP L (Sold Separately)
TypeRechargeable lithium-ion battery
Nominal Voltage22.2 V DC
Nominal Capacity1200 mAh
Charge CyclesApprox. 300 times
Number of Prints*
Postcard SizeApprox. 36 prints
L SizeApprox. 36 prints
Card SizeApprox. 72 prints
Wide SizeApprox. 24 prints
Operating Temperatures5 – 40°C (41 – 104°F)
Dimensions110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)
WeightApprox. 230 g (8.11 oz.)
*  Test conditions:  Normal temperature (23°C/73°F), Canon images, continuous print. The above data ma\
y vary according to the printing environment and the image to be printed.
When connecting to and using a household power outlet, use only “Comp\
act Power Adapter CA-CP200”  (rated input: 100-240 V AC 50/60 Hz, rated output: 24 V DC). Using any\
thing else can cause fire, overheating, or electrical shock.
USA and Canada only:The Lithium ion/polymer battery that powers the product is recyclable.Please call 1-800-8-BATTERY for information on how to recycle this battery.
Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/o\
r explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.

C
O
P
Y  
						

							
FCC Notice(Printer, Model CD1037 Systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditi\
ons;(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in  a  residential  installation.  This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do  not  make  any  changes  or  modifications  to  the  equipment  unless  otherwise  specified  in  the  manual.  If  such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.One Canon Plaza, Lake Success, NY 11042, U.S.A.Tel No. (516) 328-5600
••••
Canadian Radio Interference RegulationsThis Class B digital apparatus complies with Canadian ICES-003.
Réglementation canadienne sur les interférences radioCet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
As an ENERGY STAR Partner, Canon Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. For voltages of 100 to 120V only.
Microsoft, Windows Vista and the Windows Vista logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.Macintosh and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.The SDHC logo and miniSDHC logo are trademarks.Corel, the Corel logo, Ulead and Ulead Photo Express are trademarks or registered trademarks of Corel Corporations and/or its subsidiaries.Portions of the code used in this firmware are based in part on the work of the Independent JPEG Group. 
No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the printer, the software, the memory cards, personal computers, peripheral devices, or use of non-Canon memory cards.
•
•
•••
•
•
•
•

C
O
P
Y