Canon Selphy Cp770 User Guide

							
11

 Press .
The menu screen appears.
 Press  or  to select [Print Settings].
 Press .
The Print Settings menu appears.
 Press  or  to select an item you wish to set.
 Press  or  to change the setting value.
To change multiple settings, repeat the steps  and .
 Press .
Returns to the menu screen. 
Press  again to return to image display.
When printing with a camera connected, the print settings made with the \
camera will be used.Depending  on  the  selected  layout,  some  settings  may  not  be  available.  You  can  check  the  available settings when [Info Display] is set to [On] on the LCD monitor (p. 9).\
Correct Red-EyeDepending  on  the  image,  red-eye  may  not  be  automatically  detected  or  optimally  corrected.  In  the following examples red-eye may not be corrected.Faces that appear extremely small, large, dark or bright in relation to the overall image.Faces turned to the side or at a diagonal, or faces with a portion hidden.Images could have portions other than the eyes mistakenly corrected. Set [Correct Red-Eye] to [On] only when printing images with red-eye.
Page LayoutThe position of the image in the layout cannot be selected.When you select [Index] and the print mode is set to [Print All Images] (p. 13), all images in the memory card can be printed out as a thumbnail index.
••
•
−−•
••
[DPOF  Print]  displays  only  when  you  insert  a  memory  card  with  DPOF settings made with the camera.

C
O
P
Y  
						

							
1

  Printing with the Date
Print  images  with  the  date  when  the  images  were  taken.  Follow  the  steps  below  before  selecting images.
  Press .
 Select [Print Settings] with  or , then press 
.
 Press  or  to select [Date].
 Press  or  to set [Date] to [On].
 Press .
Returns to the menu screen. 
Press  again to return to image display.
An image in the memory card appears.
You can change the display order of the date in [Date Format] (p. 14).Printing with the date may not be possible depending on the selected layout (p. 10). Make sure that [Info Display] is set to [On] in the LCD monitor and check if [Date] is availa\
ble (p. 9).
••

C
O
P
Y  
						

							
1

 Other Printing Modes
  Press  and select [Print All Images] with 
 or .
 Press  and check the settings.
Press  or  to specify the number of copies of the selected image.You can specify up to 99 copies (or total of 999 prints).
•
•
Print image
Number of copies 
Number of sheets required
 Press .
Printing starts.
 Printing Images Using Camera Specified Settings (DPOF Print)
Select images or specify print settings with the camera before printing. For details on the DPOF settings, refer to the user guide provided with your camera.
  Insert a memory card, containing DPOF settings made with the camera 
into the card slot.
The confirmation screen for the DPOF settings appears.
 Press  and check the settings.
Print type set with the camera : Index : Standard
Number of sheets required
[Date] and [File No.] set with the camera
 Press .
Printing starts.
The date and file number reflect the DPOF settings. These settings cannot be changed with the pr\
inter.The  screen  of  step   also  appears  if  you  press   to  select  [DPOF  Print]  and  press .  Be sure  to  insert  a  memory  card  containing  DPOF  settings,  otherwise  [DPOF  Print]  will  not  appear  on  the LCD monitor.
••
 Print All Images
Print all the images on the memory card.

C
O
P
Y  
						

							
14

 Making Printer Settings
You can make printer settings such as the display language.
The default setting is marked as . 
ItemDescriptionSettingsDate FormatSets the date format used when printing out with the date.yy/mm/dd,mm/dd/yy,dd/mm/yy ()
LanguageSets the display language of the LCD monitor.See  below.
Info DisplayDisplays  the  properties  of  the  print  settings  or  file  number  of the image.On (),Off*
*  The image display will be large but it will take some time until it disp\
lays.
 Press .
 Select [Printer Setup] with  or , then press 
.
 Press  or  to select an item you wish to set.
 Press  or  to change the setting value.
 Press .
Returns to the menu screen. 
Press  again to return to image display.
Changing the [Language] setting
1  Select [Language] in step , then press .
2 Press , ,  or  to select the language you wish to set.
3 Press . Returns to the [Printer Setup] screen.
To change multiple settings, repeat steps  and .

C
O
P
Y  
						

							
15

Printing from Digital Cameras, Mobile Phones or Computers
 Printing from a Camera
Print from a camera supporting  (PictBridge*) (p. 11) or  (Canon Direct Print) by connecting it to the  printer.  This  guide  explains  the  procedure  for  printing  with  a  Canon  digital  camera  connected  as an example. 
*  PictBridge is an industry standard that allows any digital camera or video camera, regardless of the manufacturer or model, to print images directly without using a computer.
Make sure that no memory cards are inserted into the printer and that no computer is connected to the printer before connecting a camera.Ensure the camera’s communication settings are configured correctly.Set the print setup with the camera.For camera handling details, refer to the user guide provided with your camera.
•
•••
 Connect a camera with the printer using the USB cable supplied with the 
camera.
 Turn on the power of the printer first, then the camera. Play back the 
images with the camera.
The  or the  icon appears on the LCD monitor of the camera.
 Select the desired image on the camera, and press the  button of the 
camera.
Printing starts.
If  the  camera  does  not  feature  the   button,  make  the  settings  with  the  camera  until  printing.  For details, refer to the user guide provided with your camera.Printing  cannot  be  canceled  with   on  the  printer  while  printing  with  a  camera  connected. Operate the camera to cancel printing.When printing from a  (Canon Direct Print) connected camera on Wide Size paper (100 x 200 mm (4 x 8 in.)), the image will print only up to 100 x 150 mm (4 x 6 in.), a\
ligned to the left.
•
•
•

C
O
P
Y  
						

							
1

  Infrared (IrDA, IrSimple) Wireless Printing 
  Turn the printer’s power on.
 Transmit an image from your mobile phone 
to the printer.
Power lamp blinks green during data transmission.
Printing starts after data transmission is completed.
Within 20 cm (7.9 in.) 
Effective range Approx. 10°
 Printing via Bluetooth
  Install Bluetooth Unit BU-  0, sold separately.
 Turn the printer’s power on.
Up to approx. 10 m (33 ft.)
 Transmit an image from your mobile phone to 
the printer.
Bluetooth unit blinks blue during data transmission.
Printing starts after data transmission is completed.
For instructions for connecting or communication with Bluetooth, refer to the user guide provided with your Bluetooth unit. If prompted by the mobile phone for a device to connect to, select [Canon SELPHY CP770-xx:xx:xx (where x refers to a numerical digit)]. 
 Printing from a Mobile Phone (Wireless Printing)
Print images wirelessly from a mobile phone supporting infrared data communication (IrDA or IrSimple) or Bluetooth. 
Make sure that no memory cards are inserted in the printer, and no camera or computer is connected to the printer during wireless printing.You cannot establish a wireless connection between the printer and a computer.Only image data files up to approx. 2 MB can be transmitted (maximum data size varies depending on the mobile phone).Data  transmission  time  increases  when  data  size  is  large.  Accordingly,  it  may  take  some  time  before printing starts.Movies, E-mails, phone directories, or image data, for example, downloaded from a URL attached to an E-mail may not be printable.The printer may not be able to print images saved onto the memory card of certain mobile phones.Printing cannot be canceled by pressing  during wireless printing.The position and orientation (horizontal or vertical) of images for printing is set automatically by the printer.The edges of the image may be cropped with certain paper sizes.For information on how to use the mobile phone’s wireless functions, refer to the user guide of your mobile phone.
•
••
•
•
•••••

C
O
P
Y  
						

							
17

 Printing from a Computer
Print from a computer connected to the printer.
  System Requirements
WindowsMacintoshOSWindows  Vista,  Windows  XP  Service  Pack  2, Windows 2000 Service Pack 4Mac OS X (v10.3 - v10.4)
ConfigurationThe above OS should be pre-installed on computers with built-in USB ports.
CPUWindows Vista: Pentium 1.3 GHz or higherWindows XP/Windows 2000: Pentium 500 MHz or higher
PowerPC G3/G4/G5 or Intel processor
RAMWindows Vista: 512 MB or moreWindows XP/Windows 2000: 256 MB or more256 MB or more
InterfaceUSB
Free  Hard  Disk Space520  MB  or  more  (when  all  applications  are installed)320  MB  or  more  (when  all  applications  are installed)
Display1,024 x 768 pixels or moreHigh Color (16 bit) or better1,024 x 768 pixels or more32,000 colors or better
Make sure that no memory card is inserted in the printer, and that no camera is connected to the printer before connecting a computer.The  printer  may  not  function  properly  if  other  USB  devices  (with  the  exception  of  a  USB  mouse  or  USB keyboard) are used at the same time as the printer. Disconnect all other USB devices from your computer and then reconnect the printer.Do not put your computer into the standby mode (or sleep mode) while the printer is connected to a USB port. If you accidentally do so, do not disconnect the USB cable from your computer while it is in standby mode.For details on how to use the computer, refer to the user guide of your computer.
•
•
•
•
 Introduction to the Supplied Programs
The software necessary for printing with the printer connected to a computer is included on the supplied Compact Photo Printer Solution Disk.
ZoomBrowser EX (Windows)/ImageBrowser (Macintosh)
Use  this  multi-function  software  not  only  for  printing,  but  also  for  managing,  viewing,  editing, and exporting images.
✤
Ulead Photo Express LE (Windows Vista, Windows XP)
Use this software’s functions to add frames or text to your images, and to easily print them in various ways.
✤

C
O
P
Y  
						

							
1

  Installing the Printer Driver
Do not connect the computer to the printer before placing the CD-ROM in the computer.You must login to the computer as an administrator before beginning installation.••
WindowsMacintosh
  Place the supplied CD-ROM 
in the computer.
 
 Click [Yes], if you consent to the 
software license agreement.
 Connect the computer to the 
printer, and turn the printer’s 
power on.
 Click [Finish].
 Place the supplied CD-ROM 
in the computer and double-
click the  icon in the CD-
ROM window.
 
 Click [Agree], if you consent 
to the software license 
agreement.
 Click  to select [Easy 
Install], then click [Install].
 Restart your computer.
 Connect the computer to the 
printer (see the figure left), 
and turn the printer’s power 
on.
 Register your printer on the 
Printer List in the [Printer 
Setup Utility].
Click to select your printer name.
Click
Click
Commercially available USB cable
The instructions in this section are intended for Windows XP and Mac OS X (v10.4). If you are using another version, actual screen contents and procedures may differ slightly from those indicated here.

C
O
P
Y  
						

							
19

 Installing the Software
WindowsMacintosh
  Place the supplied CD-ROM 
in the computer.
 
Click
 Place the supplied CD-ROM 
in the computer and double-
click the  icon in the CD-
ROM window.
 
Click
 Click [Install].
 Click [Restart] or [Finish], then 
remove the CD-ROM after 
screen returns to the desktop.
 Select [Easy Installation] and 
click [Next].
 Click [OK], then remove the 
CD-ROM.
Refer to the [Help] menu of the software for operations.Download ZoomBrowser EX/ImageBrowser Software Guide (PDF) from:  http://web.canon.jp/imaging/information-e.htmlFor Ulead Photo Express LE customer support, consult the following website. http://ulead.com/events/canon/selphy
••
•
Follow the onscreen instructions to proceed.

C
O
P
Y  
						

							
0

Accessories (Sold Separately)
 Color Ink/Paper Sets and Paper Cassettes
The  color  ink  cassette  and  the  paper  cassette  differ  depending  on  the  paper  size.  Check  the  table below*1.
Paper sizeColor Ink/Paper SetSheetsPaper CassettePostcard SizeColor Ink/Paper Set KP-36IP36Paper Cassette PCP-CP300(Included with the SELPHY)Color Ink/Paper Set KP-72IP72
Color Ink/Paper Set KP-72IN72
Color Ink/Paper Set KP-108IP108
Color Ink/Paper Set KP-108IN108
L SizeColor Ink/Paper Set KL-36IP36Paper Cassette PCL-CP300
Card SizeColor Ink/Paper Set KC-36IP36Paper Cassette PCC-CP300(Included with the SELPHY)Color Ink/Label Set KC-18IF (Full-page labels)18
Color Ink/Label Set KC-18IL (8-label sheets)*218
Wide SizeColor Ink/Paper Set KW-24IP24Paper Cassette PCW-CP100
*1   Some accessories may not be available depending on region.
*2   Set the page layout to [8-up] (p. 10).
 Other Accessories
Bluetooth Unit BU-30: You can print wirelessly from a mobile phone supporting Bluetooth.
Battery Pack NB-CP2L: You can print at locations without a power outlet.
•
•
  Remove the battery cover. Attach the battery pack. Charge the battery.  (Approx 4 hours, charging temperature between 5 - 40°C (41 - 104°F))
 Press and hold down the battery cover lever.
It clicks
To a power outlet
Power lamp  Lights orange: Charging  Off: Charge complete  Blinks orange: Low battery
Number of prints (while using the fully charged battery pack)Postcard/L Size: Approx. 36, Card Size: Approx. 72, Wide Size: Approx. 24
 Remove the cover.
When the battery pack is not used, remove it from the printer, put the terminal cover on the battery pack, and put the battery cover back on the printer.
 Charging the Battery Pack

C
O
P
Y