Canon Selphy Cp750 User Guide

							11
Getting ReadyPrinting Appendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
4Close the lid.
• Use paper specified for use by Canon with this printer. You cannot use 
commercially sold paper such as regular postcards or paper specified for 
use in SELPHY ES series printers.
• Placing 19 or more sheets in the paper cassette (13 or more Wide Size 
sheets) will lead to mis-feeds or paper jams.
• Mistakenly reversing the paper in the cassette will result in a poor print 
and may lead to malfunctions.
• Do not bend the paper at the perforations or separate it before printing.
• Do not use label sheets that have begun to peel or label sheets with 
portions peeled back.
• Do not reprint a sheet that has been through the printer.
• Do not write on a sheet before printing with the printer. It may lead to a 
malfunction.
1Open the paper cassette slot cover.
2Hold the paper cassette as illustrated and insert it all the 
way in.
1Push down on the lid in the 
direction indicated by the 
arrow until it clicks shut.2Slide the paper cassette lid until it stops.
Correct Position
On cassettes with two lids, close 
only the inner lid then insert the 
cassette fully into the slot until it 
clicks into place.
The lid is 
slanted
Slightly open
Installing the Paper Cassette
Hold it here
Paper visible 
through opening
 
						

							12
Getting Ready Appendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
Printing Precautions
This section explains the precautions that should be observed 
when printing. 
These precautions are applicable to all of the printing methods, 
including “Printing from Memory Cards,” “Printing from Cameras,” 
“Printing from Computers” and “Wireless Printing.”
• Do not pull out the paper cassette or open the ink cassette cover just after 
turning on the printer or while printing. This will lead to malfunctions. 
• During printing, the paper will pass in and out four times. Do not touch or 
pull on the paper during this process. It may lead to injuries or 
malfunctions. 
• Placing 19 or more sheets in the paper cassette (13 or more Wide Size 
sheets) will lead to mis-feeds or paper jams. Moreover, do not let 10 or 
more sheets of printed paper collect on top of the paper cassette.
• Printing temporarily ceases if the printer interior rises past a certain 
temperature. Since printing will automatically resume when the 
temperature lowers, please wait a moment. (This may occur when the 
ambient temperature is high or numerous prints have been produced 
continuously.) 
• Do not print on printed paper.
Printing
 
						

							13
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
Printing from Memory Cards
• SELPHY printers support image data conforming to the Design rule for 
Camera File system (Exif compliant) and DPOF (Ver. 1.00) standard.
• Use memory cards that have been initialized in a camera. The images may 
not be recognized on memory cards formatted in a computer. 
Please refer to the user guide included with your memory card for handling 
instructions.
1Press and hold the printer’s power button until the start-
up image appears on the LCD monitor. 
2Insert the memory card into the appropriate card slot 
with the label facing up. 
The memory card will project slightly from the card slot. An image 
saved onto the memory card will appear in the LCD monitor.
Do not insert more than one card at a time into the card slots.
1Grasp the protruding portion of the card 
and pull it out.
Inserting Memory Cards
Press and hold until the image appears.
Removing Memory Cards
SD Slot
• SD Memory Card
• miniSD Card*1
•microSD Card*2
• SDHC Memory Card
• miniSDHC Card*1
• microSDHC Card*2• MultiMediaCard
•MMCplus Card
•MMCmobile Card
•MMCmicro Card *2
• RS-MMC Card
MS Slot
• Memory Stick
• Memory Stick PRO
• Memory Stick Duo
• Memory Stick PRO Duo
• Memory Stick micro*2
CF Slot
•CF Card
• Microdrive
• xD-Picture Card*2*1 Align the card with the guides on the lower portion of 
the slot and insert.
*2 A specialized adapter is required (For xD-Picture Cards, 
purchase a CompactFlash card Adapter for xD-Picture 
Cards separately.)
 
						

							14
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
The following types of information appear on the LCD monitor.
SELPHY CP750
SELPHY CP740
Although there are some differences in the information displayed by the 
SELPHY CP750 and SELPHY CP740 as shown above, the fundamental 
elements are the same. Therefore, the examples that follow use only the 
SELPHY CP750 monitor to explain the procedures.
When selecting images, you can hide the image data and show the 
image so that it fills the monitor. Use this function when you wish to 
check detailed portions of images.   
1Press the  (Display) button. 
Pressing the  (Display) button again restores the standard view.
LCD Monitor
Card slot with 
memory card 
inserted
Mode
Print LayoutDate
My ColorsPrint Image
Total Number of Prints Number of Prints of Selected 
Image Installed Ink Cassette Type
(in this example, [P] for 
Postcard-Size)
Selected Image
Image Number
Card slot with 
memory card 
inserted
Image Number
Selected Image
Mode
Print 
LayoutDate
Print Image
Number of Prints of Selected 
Image
Total Number of Prints
Installed Ink Cassette Type
Button Functions
Full Screen Display
(Power) Button
Date Button
Switches between 
date imprint 
modes.
Layout Button
Switches between 
print layouts.
Mode Button
Switches between 
operating modes.
Print/Stop Button
Starts and stops printing. (Display) Button
Displays images at 
full size on the 
monitor.
(Trimming) Button
Enlarges and prints 
a portion of the 
image (CP750 only)
W X + – Buttons
Switches between 
images and sets the 
number of prints.
(My Colors) Button
Switches between My Colors modes (CP750 only).
(Red-Eye Correction) 
Button
Corrects the red-eye in 
images shot with a flash.
 
						

							15
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
Select a mode to set the print operation.
SELPHY printers use the shooting data recorded when the image is shot to 
print a finer quality print. To switch this special processing function off, press 
and hold the Date button while pressing the Print/Stop button to start 
printing. 
Printing One Copy of the Displayed Image (Single 
Mode)
1Confirm that   (Single) mode is selected in the LCD 
monitor.
2Press W or X to select an image to print. 
Keeping the button pressed advances the images more quickly.
3Configure the print layout, date imprint, trimming and 
My Colors settings as desired.
The trimming and My Colors settings are only available on the 
SELPHY CP750.
4Press the Print/Stop button.
The printer will begin to print.
Selecting Modes and Print Operations
 (Single)Prints one copy of the displayed image.
 (Select)Prints the specified number of copies of the selected 
images.
 (All)Prints a copy of all images on a memory card, one to a 
sheet.
 (DPOF)Prints according to the DPOF (Digital Print Order 
Format) settings selected in the camera. See your 
camera user guide for the instructions on DPOF settings.
Selecting an Operation Mode
1. Press the Mode button.
The operation mode list will display.
2. Press W or X to select an operation mode.
3. Press the Mode button again.
 
						

							16
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
Printing the Specified Number of Copies of the 
Selected Images
1Confirm that   (Select) mode is selected in the LCD 
monitor.
2Press W or X to select images to print. 
Keeping the button pressed advances the images more quickly.
3Press + or – to select the number of copies to print. 
Keeping the button pressed advances the values more quickly.
4Repeat Steps 2 and 3 to select and set the number of 
copies for the desired images.
5Configure the print layout, date imprint and My Colors 
(color effects) settings as desired.
These settings apply to all of the images selected in Steps 3 and 4. 
The My Colors setting is only available on the SELPHY CP750.
6Confirm the settings displayed on the LCD monitor.
Confirm that the required number of sheets is in the paper cassette.
7Press the Print/Stop button.
The printer will begin to print. When the printing is complete, all of 
the copy settings will reset to zero.
When you select   (Index) for the print layout, set the number of copies 
to print to 1. Even if you set a multiple number of copies to print,  only one 
image at a time will print.Number of copies of the 
displayed image
Total Number of Prints 
to Be Printed
 
						

							17
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
Printing One Copy of All Images on the Card
1Confirm that   (All) mode is selected in the LCD 
monitor.
2Configure the print layout, date imprint and My Colors 
settings as desired.
These settings apply to all of the images. The My Colors setting is 
only available on the SELPHY CP750.
3Confirm the settings displayed on the LCD monitor.
Confirm that the required number of sheets is in the paper cassette.
4Press the Print/Stop button.
The printer will begin to print. 
You can create an index of all the images on a memory card by selecting the 
 (All) mode, setting the print layout to   (Index) and printing.
Printing According to the DPOF Settings Selected in 
the Camera
1Use the camera to select the images and number of 
copies you desire. 
Methods for configuring print settings may vary between camera 
models. See your camera user guide. 
2Confirm that   (DPOF) mode is selected in the LCD monitor.
You will not be able to select the DPOF mode if DPOF data is not 
contained on the memory card.
3Press the Print/Stop button.
The printer will begin to print. 
The date imprint will print according to the DPOF settings. You cannot 
configure the date imprint with the printer’s Date button in this case. Neither 
can you specify a print layout. 
Total Number of Prints 
to Be Printed
Total Number of Prints to 
Be Printed
The [Print Type] selected in 
the camera will display. 
 
						

							18
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
Select a print layout.
 (1 Image Borderless)Prints without borders.
 (1 Image Bordered)Prints with a white border.
 (2 Images Borderless)Prints two images without 
borders on a single sheet.
 (2 Images Bordered)Prints two images with a 
white border on a single 
sheet.
 (4 Images Borderless)Prints 4 images without 
borders on a single sheet. (4 Images Bordered)Prints 4 images with a 
white border on a single 
sheet.
 (8 Images Borderless)Prints 8 images without 
borders on a single sheet.
 (8 Images Bordered)Prints 8 images with a 
white border on a single 
sheet.
(This layout setting cannot 
be selected when using 
card sized sheets.)
 (Index)Prints eight images on a 
single sheet along with 
their image numbers. 
(Image numbers do not 
print on the card sized 
sheets.)
Print Layout Settings
Example on a 
card sized sheet.
 
						

							19
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
1Press the Layout button and select a print layout from the 
list that displays, then press the Layout button again. 
The total number of 
sheets will change 
according to the print 
layout selection.
• Layouts which can be selected will differ according to the printing mode.
{: selectable
—: cannot be selected
U: selectable with conditions
*1 The print type will depend on the camera settings. The print type cannot be 
configured from the printer.
*2 This layout can be selected only when the camera’s print type is configured to 
“standard”. Prints one image without borders.
*3 This layout can be selected only when using card sized sheets.
*4 This layout cannot be selected when using card sized sheets.
*5 This layout can be selected only when the camera’s print type is configured to 
“index”
Mode
Layout (Single) (Select) (All)
(DPOF)*1
(1 Image Borderless){{{U*2
(1 Image Bordered){{{—
(2 Images Borderless)—{{—
(2 Images Bordered)—{{—
(4 Images Borderless)—{{—
(4 Images Bordered)—{{—
(8 Images Borderless)U
*3{{—
(8 Images Bordered)—U
*4U*4—
(Index)*4—{{U
*5
 
						

							20
Getting ReadyPrintingAppendices Overview
Troubleshooting Tasks and Index
Next Back
Return to Cover Page
You can select whether or not to include the date imprint and its format.
 (No Imprint)
 (Year/Month/Day)
 (Month/Day/Year)
 (Day/Month/Year)
1Press the Date button. Press W or X to select whether or 
not to include the date imprint, then press the Date 
button again. 
• The date used in the date imprint is the shooting date in the Exif data 
included with each image data.
• If the image data does not contain Exif information, the file modification 
date is used as the date imprint.
• The date imprint cannot be used when the   (Index) print layout is 
used. 
• The date imprint cannot be printed on card sized sheets using the   
(8 Images) print layout.
Date Imprint Settings
Does not include the date 
imprint.
2007/04/30
Prints the date in the Year/
Month/Day format.
2007/04/30
04/30/2007
Prints the date in the Month/
Day/Year format.
04/30/2007
30/04/2007
Prints the date in the Day/
Month/Year format.
30/04/2007