Canon scanner CanoScan N656U User Manual

							61 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index6.
Click the down-arrow for Image Type and select a setting from the
drop-down list. (
p.31)
Note
Your selection automatically sets the mode for the
scanning job.
7.Review the settings you see below the Image Type selection (Color
Mode, Resolution, Width, Height, Size, Paper Size). (
p.32-35)
If you are satisfied with these settings go on to the next step.
Note
•On the Simple Mode sheet you click one of the flat
buttons (the black inverted triangles) to open a
pop-up menu and select another setting.
•You can click the Edit Image Type button and
define up to 12 custom Image Types in the Image
Type Settings dialog box. (
p.34)
•Click the Magazine check box (
p.35) on when
scanning magazine pages to enable moiré
reduction and reduce dot patterns. 
						

							62 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index8.
Click the Preview button to pre-scan the image and display it in the
Preview Area. 
						

							63 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index9.
Click a button in the Toolbar (
p.27) to manipulate the image.
Note
You can click the Auto Tone button (
p.29) to have
ScanGear CS-U automatically adjust the color tones of
the scanned image. This is the only color adjustment
you can make in the Simple Mode. To perform more
detailed color adjustments, click the Advanced Mode
button then click the Tone tab to open the Tone
Sheet.(
p.40)
10.Specify the scanning area.
Point to one corner of the area of the image that you want to scan.
Click the left mouse button and, while holding the mouse button
down, drag the mouse pointer to the opposite corner of the area
you want to scan. Release the mouse button.
The area will be boxed in by a rectangle.
11.Click the Scan button to scan the image.
The image is acquired in the software application.
12.Close the ScanGear CS-U window. You can edit or save the image
with the application software.   
						

							64 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index
Scanning in the Advanced Mode
This is a brief overview of the general procedure for previewing and
scanning an original in the Advanced Mode.
1.Place the original on the scanner.
Note
For details about positioning the original on the
scanner, see your scanner users manual.
2.Start the software application you are going to use.
3.Confirm that your scanner is selected in the Select Source (or its
equivalent) dialog box. (
p.59)
4.Start ScanGear CS-U as a TWAIN driver. (TWAIN 
p.97)
Refer to your software application users manual for details about
acquiring an image with a scanner. For example, click the File menu and
select Acquire or Scan. 
						

							65 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index5.
The ScanGear CS-U main window opens.
If the Simple Mode main window appears, click the Advanced Mode
button.
Note
If you see an image in the Preview Area this means one
of the preview settings has been switched on with the
Preferences sheet. : her wise, the Preview Area is
empty.
6.In the Main sheet adjust the settings for the Color Mode, Output
Resolution, Selection (Scanning area), and Scale. 
						

							66 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index7.
In the Scanner sheet, specify a variety of settings for operation of
the scanner. (
p.52)
8.Click the Preview button to pre-scan the image and display it in the
Preview Area.
9.Click a button in the Toolbar (
p.27) to manipulate the image. 
						

							67 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index10.
Adjust the image quality with the tools and options provided on
the Tone (
p.40) or Halftone (
p.51) sheet.
11.Specify the scanning area.
Point to one corner of the area of the image that you want to scan.
Click the left mouse button and, while holding the mouse button
down, drag the mouse pointer to the opposite corner of the area
you want to scan. Release the mouse button.
The area will be boxed in by a rectangle.
12.After performing all the settings, click the Scan button to scan the
image.
The image is acquired in the software application.
13.Close the ScanGear CS-U window. You can edit or save the image
with the application software. 
						

							68
Top  Page
Glossary
Contents
Index chapter
6
Settings in the
Windows Control Panel
Opening Scanners and Cameras Properties
General Settings
Events Settings
Preferences Settings
Color Management Settings 
						

							69 chapter 6
Preferences
Settings
Top  Page
Glossary
Contents
Index
Opening Scanners and
Cameras Properties
You can specify some settings for ScanGear CS-U with using Scanners
and Cameras properties in Windows Control Panel.
Scanners and Cameras Properties dialog can be opened with the
following procedures. Be sure to close ScanGear CS-U for this operation.
1.On the Windows desktop click the Start button, point to Settings,
and click Control Panel.
2.In the Control Panel window double-click the Scanners and
Cameras icon.
3.In the Scanners and Cameras Properties window, click the name of
the scanner, and click the Properties button. 
						

							70 chapter 6
Preferences
Settings
Top  Page
Glossary
Contents
Index4.
In the Properties window, click the appropriate tab (General,
Events, Preferences or Color Management) to open the respective
sheet.
5.Confirm that the settings are apropriate. Otherwise make changes
as necessary. After the changes are made, click the Apply button to
validate the changes.
6.Click the OK button. The dialog is closed and the Scanners and
Cameras properties dialog is activated.
7.Click the OK button. The setting are completed. The changes will
be effective the next time you launch the ScanGear CS-U.