Canon scanner CanoScan LiDE 700F User Manual

							Quick Start Guide Quick Start Guide
QT5-2200-V01 ©CANON INC. 2009 PRINTED IN VIETNAM
XXXXXXXX
Please read this guide before operating this scanner. After you finish reading this guide, 
store it in a safe place for future reference.
Table of Contents
Safety Precautions.............................. 1 Using the Scanner Buttons ................. 9
Package Contents............................... 3 Scanning with MP Navigator EX ......... 10
Installing the Software......................... 4 Scanning Film ..................................... 11
Preparing the Scanner ........................ 7 Positioning the Scanner ...................... 15
Try Scanning ....................................... 8 Specifications ...................................... 16
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042 U.S.A.
CANON AUSTRALIA PTY LTD
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LIMITED
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand 
						

							• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
• Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
• Adobe, Adobe RGB and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated 
in the United States and or other countries.
• ©ArcSoft, Inc. All rights reserved for PhotoStudio.
• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.FCC Notice (U.S.A. Only)Model Number : K10337This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or 
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
As an ENERGY STAR
® Partner, Canon Inc. has determined that this product meets 
the ENERGY STAR guidelines for energy efficiency.
WarningWhen you use this product, you should pay attention to the following legal issues:
• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be 
prohibited by law and may result in criminal and/or civil liability.
• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the 
item being scanned. 
If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance. 
						

							Safety Precautions
1
Safety Precautions
Please read and take note of the following precautions before using the scanner and accessories.
WARNINGIndicates a warning concerning operations that may lead to death or injury to persons if not performed
correctly. In order to use the scanner safely, always pay attention to these warnings.
CAUTIONIndicates a caution concerning operations that may lead to injury to persons or damage to property if not
performed correctly. In order to use the scanner safely, always pay attention to these cautions.
About Locations
WARNING• Do not place the scanner near flammable liquids such as alcohol or thinners. If the internal electrical 
parts come in contact with flammable liquids, fire or electrical shock may result.
CAUTION• Do not place the scanner in areas with high humidity, areas subject to direct sunlight, areas with high 
temperatures and areas near flame sources. Fire or electrical shock may result.
• Do not place the scanner on shaky stands, unstable surfaces or surfaces subject to frequent 
vibrations. If the scanner falls, it may cause injury.
• When setting up the stand, read this guide carefully to place the scanner correctly. Keep the 
document cover close except when necessary. Setting the stand incorrectly may result the scanner 
to fall sideways and cause injury.
• Do not push the scanner into a narrow cabinet or put a tablecloth on it or place on a thick rug. If the 
scanner has heat, it may cause fire or damage.
About the Power Supply
WARNING• Do not place heavy objects on, pull or excessively bend, twist or tie the USB cable. Damaged wires 
may cause fire or electrical shock.
• Always plug the USB cable in all the way. If it is not plugged in completely, fire or electrical shock may 
result.
• Do not use cables other than the one supplied. Fire or electrical shock may result.
• If lightning strikes in your neighborhood, unplug the USB cable from the scanner and refrain from 
using it. Lightning strikes could cause a fire, electric shock, or damage to the scanner.
CAUTION• When unplugging the USB cable, always pull on the main body. Pulling the cable may damage the 
wires and lead to fire or electrical shock.
WA R N I N GThis product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor. 
						

							Safety Precautions
2 General Handling Precautions
WARNING• Do not take apart or modify the scanner and supplies. Fire or electrical shock may result from 
improper handling of its components.
• If you hear unusual noises, see smoke, feel excessive heat or smell anything unusual, immediately 
unplug the USB cable and contact your retailer or Canon Customer Support Help Desk. Continued 
use may result in fires or electrical shock.
• Do not use flammable sprays near the scanner. Do not spill water or liquids into the scanner. Also do 
not drop metallic pieces such as paper clips or staples into the scanner. If they enter and contact the 
inner electrical parts, fire or electrical shock may result.
• When cleaning the scanner, always unplug the USB cable. Wipe with a soft dry cloth. When it is still 
dirty, use a cloth damped with water and wrung well, and then wipe off moisture with a soft dry cloth. 
Do not use flammable liquids such as alcohol, benzene or thinners. If a flammable liquid enters the 
inner electrical parts or the cables are damaged by plugging/unplugging, fire or electrical shock may 
result.
• When transporting the scanner, always unplug the cables. Damaged cables could cause fire or 
electrical shock.
If anything enters the scanner, immediately unplug the USB cable and contact your retailer or Canon
Customer Support Help Desk.
CAUTION• Do not release the document cover until it completely opens/closes. If the document cover falls, it 
may lead to pinch your hands or damage the scanner and result in injury.
• Do not place heavy objects on the scanner. Objects may fall and cause injury.
• Do not place items that weigh 2.0 kg (4.4 lbs.) or more on the document glass. Also, do not press 
heavily (i.e., more than 2.0 kg (4.4 lbs.)) on the document cover or the document glass. The 
document glass may break and cause personal injury.
• Do not bump the document glass or drop heavy books or objects on it. The document glass may 
break and injure you.
• When not in use for extended periods, unplug the USB cable for safety.
• Do not use the supplied CD-ROM in regular CD players. It produces excessively loud sound that may 
cause hearing damage.
Setup and Operating Conditions
• Do not set up in areas where there are excessive fluctuations in temperature. Also do not move the 
scanner from low-temperature areas to high temperature areas. Condensation may cause image 
errors. Leave the scanner enough time to gradually adapt to the new conditions before use.
• Do not place the scanner in areas subject to direct sunlight or strong room light. It may cause 
damage to the scanner or decrease image quality. If you have to place the scanner in direct sunlight, 
make sure to use a thick curtain to block the light.
• Leave enough space (approximately 20 cm (8 in.)) around the scanner when setting up. 
						

							Package Contents
3
Package Contents
Scanner and Accessories
Documentation
•Quick Start Guide (this document)
•Additional Documents
Setup CD-ROM
•Software Programs- ScanGear (scanner driver)
- MP Navigator EX (utility software)
- Solution Menu (menu panel software)
- ArcSoft PhotoStudio (image editing software)
•On-screen Manuals-Scanning Guide (for ScanGear, MP Navigator EX, and troubleshooting)
- Manuals for bundled application programs
*In this guide, Windows Vista operating system Ultimate Edition (hereafter referred to as Windows 
Vista) screenshots are used to illustrate explanations common to all operating systems.
Scanner USB Cable Film Adapter UnitFilm Guide
 (for 35mm film strip) 
						

							Installing the Software
4
Installing the Software
1Place the Setup CD-ROM in the drive.
For Macintosh: Double-click the Setup icon. Enter the administrator ID and password on the 
authentication dialog box.
For Windows 2000/XP and Macintosh, skip step 2 and go to step 3.
2For Windows Vista, when the AutoPlay dialog box 
appears, run the setup program, and then click Continue 
to proceed when the User Account Control dialog box 
appears.
3If prompted, select your language and place of residence, and then click Next.
In some countries, these dialog boxes will not appear.
• Do NOT connect the scanner to a computer before installing the software. If you connect the 
scanner and the Found New Hardware screen appears, unplug the USB cable from the 
computer and click Cancel. The screen may close automatically when the USB cable is 
unplugged.
• Quit all running applications before installation.
• To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the 
Canon scanner.
• Log in as an administrator to install the software.
• Do not switch users during the installation process. 
						

							Installing the Software
5
4Click Easy Install on the main menu.
5Click Install to start installation.
Carefully read the License Agreement, and then click Ye s to 
proceed.
For Macintosh, skip step 6 and go to step 7.
6For Windows, carefully read the Please Allow All Install 
Wizard Processes screen, and then click Next.
7Follow the on-screen instructions to perform the 
installation.
8For users in the U.S.A., when the User Registration 
screen appears, follow the on-screen instructions to 
ensure product support.
For Macintosh, skip step 9 and go to step 10. 
						

							Installing the Software
6
9For Windows, when the Extended Survey Program 
screen appears, confirm it.
If you can agree, click Agree.
10When the installation is complete, click Restart to 
restart your computer.
For Windows: After restarting the computer, Solution Menu will 
appear.
For Macintosh: After restarting the computer, Solution Menu 
icon will be registered in the Dock.

You can select either MP Navigator EX, the Scanning Guide 
(on-screen manual), or the Online Registration.
* The Online Registration is available for users in the U.S.A. 
only.
• Make sure to remove the CD-ROM from the drive and store it in a safe place.
• If you encounter a problem during installation, see Troubleshooting in the on-screen manual: Scanning Guide. 
						

							Preparing the Scanner
7
Preparing the Scanner
Unlocking the Scanner
1Peel the shipping tapes off the scanner.
2Slide the lock switch on the bottom of the scanner toward the unlock mark ( ).
Connecting the Scanner
1Connect the scanner to your computer with the supplied USB cable.
• Handle the scanner with both hands. Be careful not to drop the scanner.
• When you carry or transport the scanner, make sure to slide the lock switch toward the lock 
mark ( ) to fasten the scanning unit.
• Only use the USB cable provided with the scanner. Use of other cables may lead to a 
malfunction.
• Do not touch the metallic parts of the USB connector.
• The scanner does not have a power switch. The power is activated as soon as the computer is 
turned on.
• When the scanner is connected to the USB 1.1 port and HI-SPEED USB Device Plugged 
into non-HI-SPEED USB Hub message appears, ignore the message. The scanner operates 
in this condition without problems.
Unlock Mark 
						

							Try Scanning
8
Tr y Scanning
This section explains the basic scanning procedures using MP Navigator EX.
1Place a color photo document with the side to 
be scanned facing down on the document 
glass at least 1 cm (0.4 in.) away from the 
edges of the document glass, and then close 
the document cover.
2Start MP Navigator EX.
For Windows: Double-click the Canon Solution 
Menu icon, then click Scan/import photos or 
documents.
For Macintosh: Click the Solution Menu icon in the 
Dock, then click Scan/import photos or 
documents.
3Click Photos/Documents (Platen) (*1).
4Select Color Photo in Document Type.
5Click Scan to start scanning.
6When prompted that the scanning completed, click Exit.
7Click Save to save the image and close MP 
Navigator EX (*2).
• Do not move the scanner while it is 
operating.
• Do not see the light source directly during a 
scan job.
• For more information on scanning using MP Navigator EX, bundled applications, and troubleshooting, see the on-
screen manual: Scanning Guide. To open the on-screen manual: Scanning Guide, double-click the on-screen 
manual icon on the desktop, or click on  in ScanGear or MP Navigator EX.
Bottom
To p
*1
*2