Canon scanner CanoScan LiDE 700F User Manual

							Using the Scanner Buttons
9
Using the Scanner Buttons
Scanner buttons allow you to copy, scan, e-mail, and save scanned images  in PDF format with a press 
of a button. Simply place your document on t he scanner, and then press the scanner button for the 
required function. For more information, see the on-screen manual:  Scanning Guide.
• Before using scanner buttons, make sure that the required software programs for each function are installed on 
your computer using the supplied CD-ROM. See Setup CD-ROM on page 3.
If the scanner buttons do not work properly, see Troubleshooting in the on-screen manual: Scanning Guide.
•For Mac OS X v.10.3.9:  Before using the scanner buttons, you need to set Image Capture (in  Applications folder) 
to open MP Navigator EX automatically when a scanner button is pressed.
Start Image Capture, and then click  Options and select MP Navigator EX in  Application to launch when scanner 
button is pressed: .
 COPY Button
Prints (copies) the scanned image with a 
printer.
PDF Button
Saves the scanned image as a PDF file.
 SCAN Button
Discriminates the document type 
automatically, then scans and saves it with 
appropriate settings.
 E-MAIL Button
Attaches the scanned image to a new 
e-mail message.  
						

							Scanning with MP Navigator EX
10
Scanning with MP Navigator EX
MP Navigator EX enables you to perform various tasks, such as compositing images, scanning with the
scanner driver (ScanGear), and correcting/editing scanned images, as well as simply scanning.
Starting MP Navigator EX
1Click Scan/import photos or documents in the Solution Menu.
You can also start it by following procedure.
For Windows: Select Start – (All) Programs – Canon Utilities – MP Navigator EX 2.1, and click 
MP Navigator EX 2.1.
For Macintosh: Open Applications – Canon Utilities folders, then double-click the MP Navigator 
EX 2.1 icon.
The navigation mode window of MP Navigator EX is displayed.
Features of MP Navigator EX
MP Navigator EX is constituted of the following three sheets by the function.
• For more information on MP Navigator EX, see the on-screen manual: Scanning Guide.
Scan/Import Documents or Images sheetView & Use Images on your Computer sheet
Custom Scan with One-click sheet 
						

							Scanning Film
11
Scanning Film
This scanner can scan 35 mm film strip one frame at a time. Follow the procedure below when scanning
film.
1Attach the cable for the Film Adapter Unit to the 
FAU connector on the scanners side panel.
2Open the document cover and place the Film 
Guide on the document glass of the scanner.
Align the Film Guides tab with the FAU symbol on the 
document glass of the scanner.
3Remove the cap from the Film Adapter Unit and 
gently set the Film Adapter Unit over the first 
frame in the Film Guide.
Align the tab on the Film Adapter Unit with the Film 
Guide.
• Do not connect other than the accompanying Film Adapter Unit to the FAU connector. Use of 
other units may lead to malfunctions of the connected unit and the scanner.
• Do not touch the metallic parts of the FAU connector.
• Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can 
affect image quality or damage the film.
Insert the cable plug of the Film Adapter Unit 
all the way into the FAU connector.
You need to calibrate the scanner before scanning film for 
the first time. Do not place a film strip in the Film Guide at 
this point as it is not required for calibration. 
						

							Scanning Film
12
4Gently close the document cover.
5Start MP Navigator EX.
Follow the step 2 in Try Scanning on page 8.
6Click Film.
7Click  Scan.
8Click  OK on the calibration message window.
9When the scanning message window appears, 
open the document cover, remove the Film 
Adapter Unit, and then attach the cap to the unit.
Do not move the scanner while it is 
operating. 
						

							Scanning Film
13
10Place the film in the Film Guide.
Place the film face up in the Film Guide (images and 
words should read correctly from above) with the 
spaces between frames aligned with the guidelines on 
the guide.
11Remove the cap from the Film Adapter Unit 
and gently set the unit over the frame you 
wish to scan.
Align the tab on the Film Adapter Unit with the Film 
Guide.
12Gently close the document cover.
13Click OK on the scanning message window.
The scanned image is displayed in the preview area.
14Confirm the scanning image, and then click 
Scan to start scanning.
15When prompted that the scanning completed, 
click Exit.
Do not move the Film Adapter Unit once it 
has been placed on the Film Guide. Sliding it 
may scratch the film.
The document cover does not touch the document glass. Be careful not to force the 
document cover down.
Do not move the scanner while it is 
operating.
Do not move the scanner while it is 
operating.
Guidelines 
						

							Scanning Film
14
16Click Save to save the image and close MP 
Navigator EX.
• After the scanning is finished, remove the 
Film Adapter Unit, and then attach the cap to 
the unit. Remove the film and the Film Guide 
from the document glass.
• Do not leave the film strip in the Film Guide 
for an extended period of time as heat from 
the unit may damage the film.
• For more information on scanning film, see 
Scanning Film in the on-screen manual: 
Scanning Guide. 
						

							Positioning the Scanner
15
Positioning the Scanner
Horizontal Position
The document cover fully opens to allow easy scanning of
large or bound documents. An oversized document can be
scanned section by section into a single image using the
stitch-assist function of MP Navigator EX. For details, see the
on-screen manual: Scanning Guide.
Hold the document cover with one hand, and press and hold
 at the base hinge as you carefully lower the cover
all the way down.
Upright Position
If you are scanning thin documents (i.e., a single sheet or
double-folded sheet), this position saves the most space.
Thick documents or films cannot be scanned in this position.
Pull out the stand on the bottom of the scanner until it clicks,
and set the scanner upright on a flat stable surface. Gently
open the document cover as far as it goes (stops at
approximately 40°) and slide down the document along the
document cover.
Do not place items that weigh 2.0 kg (4.4 
lbs.) or more on the scanner. The scanner 
may not work or you may break the 
document glass if you press down the 
document glass firmly.
Cover the scanner with a black cloth if external light enters 
around the scanned item.
• Do not force the document cover open; it 
does not fully open when the scanner is in 
the upright position.
• Always close and secure the document 
cover first when lifting the scanner in the 
upright position.
To p
Alignment Mark
Bottom
Approximately 40°
Alignment 
Mark
Thin Item
Document 
Cover 
						

							Specifications
16
Specifications
*1Optical Resolution represents the maximum sampling rate based on ISO 14473.*2For the document types other than films, the resolution is up to 4800 x 4800 dpi.*3For film scanning only.*4The fastest speed in Hi-Speed USB mode on Windows PC. Transfer time is not included. Scanning 
speed varies according to the document types, scan settings, or specifications of the computer.
*535 mm slides are not supported.*6USB connection to PC.*7Film adapter unit weight is included.
• Specifications are subject to change without notice.
Model Name: K10337 (CanoScan LiDE 700F)CanoScan LiDE 700F
Scanner TypeFlatbed
Sensor TypeCIS (Color Contact Image Sensor)
Light Source3-color (RGB) LED
Optical Resolution 
*19600 x 9600 dpi *2
Selectable Resolution25-19200 dpi (ScanGear)
Scanning Bit DepthColor
48 bit input (16 bit input for each color (RGB))
48 bit or 24 bit output (16 bit or 8 bit output for each color (RGB))
Grayscale
16 bit input / 16 bit *3 or 8 bit output 
Scanning Speed 
*4
(Photo or Document)Color33.5 msec./line (4800 dpi), 33.8 msec./line (2400 dpi),
8.6 msec./line (1200 dpi), 4.5 msec./line (600 dpi),
2.4 msec./line (300 dpi)
Grayscale, B&W11.3 msec./line (4800 dpi), 5.9 msec./line (2400 dpi),
2.9 msec./line (1200 dpi), 1.8 msec./line (600 dpi),
2.3 msec./line (300 dpi)
Scanning Speed 
*4 (Film)2.8-223.9 msec./line
Interface
Hi-Speed USB
*4
Maximum Document SizeA4/Letter: 216 x 297 mm
Film Type/Number of Frames
35 mm strip (negative/positive)
*5 / 1 frame
Scanner Buttons4 buttons (COPY, SCAN, PDF, E-MAIL)
Operating RangeTemperature
5 
°C to 35 °C (41 °F to 95 °F)
Humidity10 % to 90 % RH, 20 % to 80 % RH for film scanning 
without condensation formation
Power RequirementsSupplied via USB port (No external adapter required)
Power ConsumptionIn operation: 2.5 W maximum, Stand-by: 1.5 W
*6,
Suspend: 11 mwatts*6
Exterior Dimensions (W) x (D) x (H)292 x 409 x 44 mm (11.5 x 16.1 x 1.8 in.)
Weight
Approximately 2.1 kg (4.6 lbs.)
*7 
						

							Quick Start Guide Quick Start Guide
QT5-2200-V01 ©CANON INC. 2009 PRINTED IN VIETNAM
XXXXXXXX
Please read this guide before operating this scanner. After you finish reading this guide, 
store it in a safe place for future reference.
Table of Contents
Safety Precautions.............................. 1 Using the Scanner Buttons ................. 9
Package Contents............................... 3 Scanning with MP Navigator EX ......... 10
Installing the Software......................... 4 Scanning Film ..................................... 11
Preparing the Scanner ........................ 7 Positioning the Scanner ...................... 15
Try Scanning ....................................... 8 Specifications ...................................... 16
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042 U.S.A.
CANON AUSTRALIA PTY LTD
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LIMITED
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand