Canon scanner CanoScan LiDE 35 User Manual

							Using the Scanner Buttons
11
English
Using the Scanner Buttons
You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily 
with a single touch of the button. Place an item on the scanner before pressing a button.
 
• To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoStudio and Acrobat 
Reader should be installed from the CanoScan Setup Utility CD-ROM.
 COPY Button
To print (copy) the scanned image with a printer:
1Press the [COPY] button.
The scanner will scan the item.
The scanned image will print.
• The printer driver should be installed and the 
printer should be on-line to use this function.
 FILE Button
To save the scanned image as a PDF file:
1Press the [FILE] button.
The scanner will scan the item.
The scanned image will be saved as a PDF 
document and appear in Adobe Acrobat 
Reader. 
A PDF (Portable Document Format) document is 
a file format that can be displayed and printed 
with application program such as Adobe 
Acrobat Reader/ Adobe Reader. It is easy to 
create PDF files for your images by using the 
FILE Button on the scanner or the FILE Button in 
CanoScan Toolbox. You can also make PDF files 
with multiple pages and create text-searchable 
PDF files.
• If you press the [Cancel] button while scanning, you can change the default settings for 
scanning. For changing settings, refer to the Scanning Guide (HTML format manual).
• To use the E-MAIL Button, one of the following e-mail programs should be installed and 
enabled.
For Windows:  Microsoft Outlook Express, Microsoft Outlook, Eudora or Netscape
Messenger. (Some mail programs are required to set the MAPI function on.)
For Macintosh:  Mail (Mac OS X 10.2 or later), Eudora or MS Entourage.
 SCAN Button
To open the scanned image in the PhotoStudio 
window:
1Press the [SCAN] button.
The scanner will scan the item.
The scanned image will appear in the 
PhotoStudio window.
 E-MAIL Button
To attach the scanned image to a new e-mail 
message:
1Press the [E-MAIL] button.
2The [E-mail software selection] dialog 
will appear. Select an option from the 
list and click [OK].
This step is required only for the first scan.
The e-mail software will start and the scanned 
image will be attached in a new message 
window.
The scanner will scan the item. 
						

							Using the USB 2.0 Interface expansion cards (Windows Only)
12
Using the USB 2.0 Interface expansion cards  (Windows Only)
To Switch to USB 2.0
If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning 
by purchasing and installing one of the USB 2.0 expansion cards available on the market. Please note that 
Macintosh computer with USB 2.0 Hi-Speed interface expansion card is not supported.
Compatible USB Expansion Cards/Hubs 
Please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility.
Expansion Cards
• Adaptec USB2connect 5100: PCI bus
• Adaptec USB2connect 3100LP: PCI bus
• Adaptec USB2connect 2000LP: PCI bus
• Adaptec DuoConnect: PCI bus
Hubs
• Adaptec XHUB4
• Adaptec XHUB4PLUS
• Adaptec XHUB7PLUS
For installation procedures, please read the instructions that accompany the USB expansion card/hub.
Confirming the USB Version
Use the following procedures to confirm whether your computer is 
equipped with a USB version 1.1 or 2.0 interface.
1Start ScanGear CS.
2Click the information icon   in the upper portion of the 
ScanGear CS window.
3Read the contents of the Interface category in the displayed 
window. USB 1.1 will show as “USB 1.1” and USB 2.0 as “USB 2.0.”
4Click the close box   to close the window.
Troubleshooting the USB2.0 Hi-Speed Interface
If the scanner is not operating correctly via the USB2.0 Hi-Speed interface, follow the steps below to 
troubleshoot it. 
1Ensure that you use the USB cable supplied with the scanner.
2Connect the scanner directly to a USB port on the computer, not through a USB hub.
3With the Microsoft USB 2.0 driver, if the scanner is not recognized by the computer 
after installing ScanGear CS:
• Detach the USB cable and attach it again.
4Use the following procedures to confirm that the computer correctly recognizes the 
USB expansion card and the scanner. 
1. Open the Windows [Device Manager] and confirm that your scanner name appears below the [Imag-
ing Device] category.
2. Confirm that [Adaptec AUA-xxxx], [NEC PCI to USB Enhanced Host Controller] or [Intel PCI to USB 
Enhanced Host Controller] appears below the [USB (Universal Serial Bus) Controllers] category.
3. Confirm that the USB expansion card is correctly installed into the computer and that the scanner is 
attached to its port. 
4. If you use more than two devices via USB2.0 Hi-Speed interface, try to disconnect other devices than 
the scanner.  
						

							Specifications
13
English
Specifications
*1 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.*2 Calibration processing time is not included.*3 Note that Macintosh computer with USB 2.0 Hi-Speed interface expansion card is not supported.
• Specifications are subject to change without notice.CanoScan LiDE 35
Scanner TypeFlatbed
Scanning ElementCIS (Contact Image Sensor)
Light Source3-color (RGB) LED
Optical Resolution1200 x 2400 dpi
Selectable Resolution25 - 9600 dpi
Scanning Bit DepthColor 16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale
16 bit input / 8 bit output
Scanning Speed
*1
(Photo or Document)Color6.4 msec./line (600 dpi), 12.7 msec./line (1200 dpi)
Grayscale, B&W3.1 msec./line (600 dpi), 4.2 msec./line (1200 dpi)
Preview Speed
*2Approximately 9 sec. 
InterfaceUSB 2.0 Hi-Speed 
*3
USB  (USB 1.1 equivalent)
Maximum Document SizeA4/Letter: 216 x 297 mm
Scanner Buttons4 buttons: COPY, SCAN, FILE, E-MAIL
Operating RangeTe m p e r a t u r e
5
°C to 35°C (41°F to 95°F)
Humidity10% to 90% RH (without condensation formation)
Power Requirements
Supplied via USB port
Power Consumption In operation: 2.5 watts maximum, Stand-by: 1.5 watts
Maximum Exterior Dimensions258 x 374 x 38 mm
WeightApproximately 1.8 kg
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall 
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the 
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows 
XP with these programs still installed. After upgrading to Windows XP, reinstall 
ScanGear CS and CanoScan Toolbox according to the steps on page 4. For details, please 
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).  
						

							System Information
14
System Information
This form should be used to record the operating environment for the purchased scanner. 
If any problems occur with the scanner, you will need this information when you contact our Customer 
Support Help Desk. Be sure to record the information and store it in a safe location.
• This information is also required to request a repair under warranty. Make sure you record the information 
and store it in a safe location.
• Guaranteed servicing for this equipment will expire five years after production ceases. 
• About the Computer UsedDate of Purchase:
Dealer Tel:
Dealer Address:
Scanner Model: CanoScan LiDE 35
Serial Number (on the back of the equipment):
Manufacturer: Model:
CPU: Clock Speed: MHz
Memory Capacity (RAM): MB
Space Available: MB Hard Disk Capacity: MB
OS:     Windows  XP  Me  2000  98
Macintosh OS X v10.1 OS X v10.2 OS X v10.3
Monitor Type: Monitor Size: inches
Printer: Manufacturer:
Type of Printer: Printer Resolutions:
Installed Virus Protection Program:
Installed Compression Program:
On-Board Expansion Cards:
Attached Peripherals:
Connected Network System: