Canon scanner CanoScan LiDE 35 User Manual

							1
English
Quick Start Guide Quick Start Guide
Setup and Scanning
Try the Additional Features
Check the Package Contents
Install the Software
Windows
Macintosh
Unlock the Scanning Unit
Connect the Scanner
Try Scanning
p.3
p.4
p.5
p.6
p.7
p.8
Using the Scanner Buttonsp.11
Using the USB 2.0 Interface 
expansion cards (Windows Only)p.12
Be sure to install the software programs before connecting the scanner 
to the computer!
Please read this guide before operating this scanner. After you finish reading this guide, store it in
a safe place for future reference. 
						

							Guide to the Manuals
2
Guide to the Manuals
• CanoScan and ScanGear are trademarks of Canon Inc.
• Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated. 
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
• Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
• ScanSoft and OmniPage are trademarks of ScanSoft, Inc.
• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.
In this guide, Windows XP screen shots are used to illustrate explanations common to all operating systems.
Open the Package
Quick Start Guide (this guide)
This guide describes a series of processes, from opening the package to using the 
scanner.
READ THIS GUIDE FIRST!
Scanning Guide (HTML format manual)
Refer to this guide when you have finished setting up the scanner according to the procedures 
in the Quick Start Guide
. It describes how to utilize the scanner with the bundled software, 
and how to solve problems when they occur. You can install this manual onto the hard disk 
together with the software programs. When you install it, the Scanning Guide
 icon will appear 
on the desktop. Double-click the icon to view it with a browser program, such as Internet 
Explorer.
User’s Guides for Application Programs (PDF format manuals)
• ArcSoft PhotoStudio
• ScanSoft OmniPage SE
Select the “View the Electronic Manuals” menu on the CanoScan Setup Utility CD-ROM. To 
read these manuals, Adobe Acrobat Reader should be installed on your computer.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Use of a shielded cable with the ferrite core(s) provided with the scanner is necessary to comply with the technical 
requirements of the EMC Directive.
War ning
When you use this product, you should pay attention to the following legal issues:
• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be 
prohibited by law and may result in criminal and/or civil liability.
• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to 
the item being scanned. 
If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.
HTML
PDF 
						

							Check the Package Contents
3
English
Check the Package Contents
Scanner and Accessories
Documents and Software Programs
• Quick Start Guide (this guide)
• Additional Documents
• CanoScan Setup Utility CD-ROM
• The two figures in the brackets below indicate the respective sizes of the Windows/
Macintosh versions of the software.
• Approximately 200 MB/ 160 MB (for Windows/Macintosh) of hard disk space on your 
computer is required to install all the programs. Additional free hard disk space is 
required to operate the programs.
ScanGear CS (25 MB / 10 MB) - Scanner Driver
It allows you to scan and load images from the scanner.
CanoScan Toolbox (15 MB / 10 MB) - Scanning Utility Program
It enables you to scan images and copy (print), attach images to e-mail messages or save images with 
simple steps. It also works with the scanner buttons.
ArcSoft PhotoStudio (35 MB / 20 MB) - Image Editing Program
It allows you to load images from the scanner, edit and retouch them, and apply special effects and 
enhancements.
ScanSoft OmniPage SE (90 MB / 80 MB) - OCR (Optical Character Recognition) Program 
It converts characters scanned from a book, magazine or newspaper into text data for editing or 
digital transmission.
Adobe Acrobat Reader (25 MB / 30 MB) - PDF File Reader Program
Electronic manuals for the above software programs (HTML (10 MB) and PDF manuals)
CanoScan LiDE 35USB Interface CableStand  (P. 7)  
						

							Install the Software (Windows)
4
Install the Software   (Windows)
1Turn the computer on.
2Place the CanoScan Setup Utility CD-ROM in the drive.
After you select your language, the CanoScan Setup Utility main 
menu will display.
3Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if 
you accept the terms.
The [Install] window will display.
4Click [Start Installation].
You will install five software programs and the Scanning Guide
 
(HTML format manual).
5The installation procedure will start.
Follow the on-screen message prompts and click [Next] or [Yes] 
to continue the installation.
6When the installation is complete, click [Yes].
The computer will restart.
7After Windows restarts, remove the CD-ROM from 
the drive and store it in a safe place.
 Continue on P. 6.
• With Windows XP/2000, you should log on with 
an administrator user name when you install or 
uninstall software programs.
• If you are using a computer which does not 
equip USB 2.0 interface by standard, refer to 
P. 1 2 .
If the Found New Hardware Wizard or 
Add New Hardware Wizard appears, click [Cancel].
• In few cases, your operating system may 
require a restart. Follow the on-screen 
messages to restart and resume installation.
Windows 
						

							Install the Software (Macintosh)
5
English
Install the Software   (Macintosh)
1Turn the computer on.
Make sure to log in with the first created administrator to install the software. You cannot install the 
software when logged in using added administrator accounts. 
2Place the CanoScan Setup Utility CD-ROM in the 
drive.
3Double-click the CD-ROM icon.
4Double-click the [SetUp] icon.
After you select your language, the CanoScan Setup Utility 
main menu will display. 
5Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if 
you accept the terms.
The [Install] window will display.
6Click [Start Installation].
You will install five software programs and the Scanning Guide
 
(HTML format manual)
7The installation procedure will start.
Follow the on-screen message prompts and click [Next], [Yes] 
or [Install] to continue the installation.
If a verification dialog appears, input the Administrator’s name 
and password.
8When the installation is complete, click [Yes].
The computer will restart.
9After restarting, remove the CD-ROM from the drive 
and store it in a safe place.
Macintosh 
						

							Unlock the Scanning Unit
6
Unlock the Scanning Unit
1Peel the seals off the scanner.
2Gently turn the scanner over.
3Push the lock switch toward the unlock mark ( ). 
4Return the scanner to a horizontal position.
• Unlock the scanning unit before connecting the scanner to the computer. If it is left 
locked, a malfunction or other problem may occur.
• Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.
• When locking the scanner, do not lift up the back and tilt the front (scanner button 
location) downward. You may be unable to set the lock.
• When carrying or transporting the scanner, always lock the scanning unit by pushing the 
lock switch toward the lock mark ( ).
Lock Switch
Unlock Mark 
						

							Connect the Scanner
7
English
Connect the Scanner
1Peel the caution seal from the back of the scanner.
2Connect the scanner to the computer with the supplied USB interface cable.
Using the Scanner in the Upright Position
Installing the Stand Removing the Stand 
Positioning an item
• Make sure that the scanning unit is unlocked. (P. 6)
• Only use the USB interface cable provided with the scanner. Use of other cables may 
lead to a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the 
computer is turned on.
• When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the 
HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub message appears. You can 
operate the scanner in this condition without problems. 
USB Interface Cable Wide Flat Connector
Small Square Connector
USB Connector
Removing the stand.
Press the hook. 
						

							Try Scanning
8
Try Scanning 
The following steps explain how to scan with ArcSoft PhotoStudio.
1Place a photo or a picture on the glass 
by aligning its top edge with the 
alignment mark, and close the 
document cover.
Alignment 
Mark
Bottom
To p
2Select [Start], [Programs] or [All 
Programs], [ArcSoft PhotoStudio 5.5] 
and [PhotoStudio 5.5]. 
PhotoStudio will start.
Windows
2Double-click the [Applications] folder 
followed by the [PhotoStudio] folder 
and the [PhotoStudio] icon.
PhotoStudio will start.
Macintosh 
						

							Try Scanning
9
English
3Click the [File] menu and choose [Select Source].
Select your scanner model name and click the [Select] button 
for Windows or the [OK] button for Macintosh.
4Click the Acquire icon   or click the [File] menu 
and select [Acquire].
ScanGear CS will start.
5Select the [Select Source].
You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document 
(Grayscale).
6Click [Preview]. 
After calibration, the preview scan will start and gradually 
display the image.
The image is automatically cropped at its original size.
If you want to trim the image further, drag the mouse 
diagonally to select the area.
7Select the [Destination].
You can select [Print] or [Image display].
When [Print] is selected, the output resolution is set to 300 dpi. 
When [Image display] is selected, it is set to 150 dpi.
[Print] is selected in this example.
• After you set this setting the first time, you 
do not need to set it from the second time 
onward with the same scanner.
• You will need to reset this setting if you 
select a different scanner or a digital 
camera.
• Do not open the document cover while a 
scan is in progress. 
						

							Try Scanning
10
8Select the [Output Size].
You can select from the following options.
• If you selected [Print] in Step 7:
Flexible / 4x6 / A4 / Letter / Custom Settings
• If you selected [Image display] in Step 7:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 
2048 x 1536 / Custom Settings
With the [Flexible] option, the scan area enclosed by the 
dotted line (cropping frame) will be scanned at the same scale 
as the original. You can change the cropping frame.
If you selected [Print] in Step 7, you can select the 4 x 6, A4, 
Letter, and Custom Settings options. Expand or decrease the 
cropping frame to correspond to the size of the paper for 
printing.
If you selected [Image Display] in Step 7, you can select an 
output size in pixels to match the sizes used by computer monitors and digital cameras. 
9Click [Scan].
The final scan will start. 
10Click close box   (Windows) or   (Macintosh) in 
the ScanGear CS window to close it.
The scanned image will appear in the PhotoStudio window.
11Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder 
where you wish to store the image file, enter a file name, 
select a file type (JPEG format is recommended) and click 
[Save].
12Click close box   (Windows) or   (Macintosh) in 
the PhotoStudio window to close it.
• If the scanner does not perform as described above, read the Troubleshooting section 
of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the User’s 
Guide (PDF format manual) for each software program on the CanoScan Setup Utility 
CD-ROM.