Canon scanner CanoScan LiDE 220 User Manual

Scanned Image Is Surrounded by Extra White Areas
Check Specify the scan area.
Click 
 (Auto Crop) in whole image view of ScanGear (scanner driver) to automatically display the cropping
frame (scan area) according to the item size.
You can also manually specify the scan area in thumbnail view or when there are white margins along the item
(for example, in photos), or when you want to create custom cropping frames.
Adjusting Cropping Frames in the Image Stitch Window
Note
•
Refer to "Adjusting Cropping...

Cannot Scan at the Correct Size
Check Make sure that the items are placed correctly.
Placing Items (When Scanning from a Computer)
252 

Item Is Placed Correctly, but the Scanned Image Is Slanted
Check When  Document  or Magazine  is selected for  Select Source, deselect the
Correct slanted text document  checkbox and scan the item again.
Settings (Document Scan) Dialog Box
Settings (Custom Scan) Dialog Box
Settings (PDF) Dialog Box
Settings (SEND) Dialog Box
253 

Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Check 1 Change the display setting in the application.
Refer to the application's manual for details. If you have any questions, contact the manufacturer of the application.
Note
•
You cannot reduce the image size in Paint. To reduce the display size, open the images in an application.
Check 2  Change the resolution setting in ScanGear (scanner driver) and scan again.
The higher the resolution, the larger the resulting image will be....

Software Problems
The E-mail Client You Want to Use Does Not Appear in the Screen for Selecting
an E-mail Client
255 

The E-mail Client You Want to Use Does Not Appear in the Screen
for Selecting an E-mail Client
Check  Check that the e-mail client's MAPI is enabled.
Refer to the e-mail client's manual for how to set MAPI.
If the problem is not solved even when MAPI is enabled, select  None (Attach Manually) in the screen for
selecting an e-mail client, then manually attach the image to the outgoing e-mail.
256 

Problems with Installation/Downloading
Cannot Install the MP Drivers
The Found New Hardware Screen Appears When the Scanner Is Connected to a
Computer
Installation Is Unsuccessful (Insufficient Free Hard Disk Space)
Installation Is Unsuccessful (Insufficient Memory)
About Inkjet Printer/Scanner/Fax Extended Survey Program
257 

Cannot Install ScanGear (Scanner Driver)If the installation does not start even after the Setup CD-ROM is insertedinto your computer's disc drive:
Start the installation following the procedure below.1.
Follow the procedures as shown below.
•
In Windows 8.1 or Windows 8, select the  Explorer icon in taskbar on Desktop, then select
Computer  from the list on the left.
•
In Windows 7 or Windows Vista, click  Start then  Computer .
•
In Windows XP, click  Start then  My Computer .
2.
Double-click the...

Note•
The scanner is not detected. Check the connection. may be displayed depending on the
computer you use.
Check 1  Make sure that the USB cable is securely connected to the machine and the
computer.
Check 2  Disconnect the USB cable from the machine and the computer, then connect
it again.
Check 3  If you cannot resolve the problem, follow the procedure below to reinstall
ScanGear.
1.
Click  Cancel .
2.
Click Start Over  on the Installation Failure  screen.
3.
Click Exit on the "CanoScan XXX"...

The Found New Hardware Screen Appears When the Scanner Is
Connected to a Computer
Check  The scanner may have been connected before installing the applications from
the Setup CD-ROM or the web page.
Disconnect the USB cable from the computer, then click  Cancel in the Found New Hardware  (Windows XP:
Found New Hardware Wizard ) screen to close it. Then install the applications from the Setup CD-ROM or the
web page.
260