Canon recording software RM9 V10 User Manual
Here you can view all the pages of manual Canon recording software RM9 V10 User Manual. The Canon manuals for Recording Software are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41
3
Storage Server Settings
You can configure the recording method and event
priority.
Display the [Storage Server Group Settings]
Dialog Box
The [Storage Server Group Settings] dialog box is
displayed.
➀[Storage Server Group]
Display the Storage Server Group name.
➁[Edit]
Change the name of Storage Server Group.
➂[Recording Settings] tab
Make settings for recording files and notifications of
available disk space.
[Maximum File Size/Duration] and [Reduce
recording frame rate when disk is under high...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-40.png "Page 41
41
3
Storage Server Settings
You can configure the recording method and event
priority.
Display the [Storage Server Group Settings]
Dialog Box
The [Storage Server Group Settings] dialog box is
displayed.
➀[Storage Server Group]
Display the Storage Server Group name.
➁[Edit]
Change the name of Storage Server Group.
➂[Recording Settings] tab
Make settings for recording files and notifications of
available disk space.
[Maximum File Size/Duration] and [Reduce
recording frame rate when disk is under high...")
41 3 Storage Server Settings You can configure the recording method and event priority. Display the [Storage Server Group Settings] Dialog Box The [Storage Server Group Settings] dialog box is displayed. ➀[Storage Server Group] Display the Storage Server Group name. ➁[Edit] Change the name of Storage Server Group. ➂[Recording Settings] tab Make settings for recording files and notifications of available disk space. [Maximum File Size/Duration] and [Reduce recording frame rate when disk is under high...
Page 42
![Page 42
42
Note
Select [Reduce recording frame rate when disk is under high
load] to trigger an event and send an e-mail notification when the
recording frame rate decreases.
[Reduce recording frame rate when disk is under
high load] is always enabled. You cannot disable it. You
can confirm whether the frame rate has been
automatically reduced by checking the [Live Events Log].
(An e-mail notification is not sent.)
Configure Event Priorities and E-mail
Notifications
Configure the priority of an event that...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-41.png "Page 42
42
Note
Select [Reduce recording frame rate when disk is under high
load] to trigger an event and send an e-mail notification when the
recording frame rate decreases.
[Reduce recording frame rate when disk is under
high load] is always enabled. You cannot disable it. You
can confirm whether the frame rate has been
automatically reduced by checking the [Live Events Log].
(An e-mail notification is not sent.)
Configure Event Priorities and E-mail
Notifications
Configure the priority of an event that...")
42 Note Select [Reduce recording frame rate when disk is under high load] to trigger an event and send an e-mail notification when the recording frame rate decreases. [Reduce recording frame rate when disk is under high load] is always enabled. You cannot disable it. You can confirm whether the frame rate has been automatically reduced by checking the [Live Events Log]. (An e-mail notification is not sent.) Configure Event Priorities and E-mail Notifications Configure the priority of an event that...
Page 43
![Page 43
Configure a Storage Server Group
43
3
Storage Server Settings
„Configure the Mail Server
➀[SMTP Server] and [Port]
Enter an SMTP server name and change the port
number, as required.
➁[Authentication]
Specify an SMTP server authentication method
([None], [POP before SMTP], [SMTP-AUTH]).
➂[User Name]
If [POP before SMTP] or [SMTP-AUTH] is selected in
[Authentication], enter a user name to be used for
authentication.
➃[Password]
Enter a password to be used for authentication with the
user name entered...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-42.png "Page 43
Configure a Storage Server Group
43
3
Storage Server Settings
„Configure the Mail Server
➀[SMTP Server] and [Port]
Enter an SMTP server name and change the port
number, as required.
➁[Authentication]
Specify an SMTP server authentication method
([None], [POP before SMTP], [SMTP-AUTH]).
➂[User Name]
If [POP before SMTP] or [SMTP-AUTH] is selected in
[Authentication], enter a user name to be used for
authentication.
➃[Password]
Enter a password to be used for authentication with the
user name entered...")
Configure a Storage Server Group 43 3 Storage Server Settings „Configure the Mail Server ➀[SMTP Server] and [Port] Enter an SMTP server name and change the port number, as required. ➁[Authentication] Specify an SMTP server authentication method ([None], [POP before SMTP], [SMTP-AUTH]). ➂[User Name] If [POP before SMTP] or [SMTP-AUTH] is selected in [Authentication], enter a user name to be used for authentication. ➃[Password] Enter a password to be used for authentication with the user name entered...
Page 44
![Page 44
44
„Specify the Event Priority
Change the priority depending on the event type using
[Event Priorities] in the [Events] tab. E-mail notification is
performed according to the specified priorities.
Click or drag the slider for each event to change the
priority.
The priority can be set to one of the following five levels:
Level ValueColor
Highest Red
High Orange
Medium Yellow
Low Light Green
Lowest Green](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-43.png "Page 44
44
„Specify the Event Priority
Change the priority depending on the event type using
[Event Priorities] in the [Events] tab. E-mail notification is
performed according to the specified priorities.
Click or drag the slider for each event to change the
priority.
The priority can be set to one of the following five levels:
Level ValueColor
Highest Red
High Orange
Medium Yellow
Low Light Green
Lowest Green")
44 „Specify the Event Priority Change the priority depending on the event type using [Event Priorities] in the [Events] tab. E-mail notification is performed according to the specified priorities. Click or drag the slider for each event to change the priority. The priority can be set to one of the following five levels: Level ValueColor Highest Red High Orange Medium Yellow Low Light Green Lowest Green
Page 45
![Page 45
45
3
Storage Server Settings
You can specify the storage period of the recorded
images and the maximum disk usage.
Display the [Servers] Tab
The [Servers] tab is displayed in the [Settings] dialog
box.
➀[Storage Server Group]
Display the Storage Server Group name.
➁List of Storage Servers
Display a list of Storage Servers.
➂[Edit]
Edit a Storage Server.
➃[Recorded Video Settings]
Specify the minimum and maximum storage period for
recorded images.
➄[Close]
Close the dialog box.
„Specify the Storage...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-44.png "Page 45
45
3
Storage Server Settings
You can specify the storage period of the recorded
images and the maximum disk usage.
Display the [Servers] Tab
The [Servers] tab is displayed in the [Settings] dialog
box.
➀[Storage Server Group]
Display the Storage Server Group name.
➁List of Storage Servers
Display a list of Storage Servers.
➂[Edit]
Edit a Storage Server.
➃[Recorded Video Settings]
Specify the minimum and maximum storage period for
recorded images.
➄[Close]
Close the dialog box.
„Specify the Storage...")
45 3 Storage Server Settings You can specify the storage period of the recorded images and the maximum disk usage. Display the [Servers] Tab The [Servers] tab is displayed in the [Settings] dialog box. ➀[Storage Server Group] Display the Storage Server Group name. ➁List of Storage Servers Display a list of Storage Servers. ➂[Edit] Edit a Storage Server. ➃[Recorded Video Settings] Specify the minimum and maximum storage period for recorded images. ➄[Close] Close the dialog box. „Specify the Storage...
Page 46
![Page 46
46
Change the Destination of the Recording File
and the Maximum Disk Usage
Specify a drive for recording or change the maximum disk
usage.
Click [Do not limit] for each drive to display the
maximum disk usage. Select the [Maximum Disk
Space Used] check box and specify a maximum disk
usage that does not exceed the total disk capacity.
1Select a Storage Server from the list of Storage
Servers.
2Click [Edit] to display the [Storage Server Settings]
dialog box.
3Clear the check boxes next to the...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-45.png "Page 46
46
Change the Destination of the Recording File
and the Maximum Disk Usage
Specify a drive for recording or change the maximum disk
usage.
Click [Do not limit] for each drive to display the
maximum disk usage. Select the [Maximum Disk
Space Used] check box and specify a maximum disk
usage that does not exceed the total disk capacity.
1Select a Storage Server from the list of Storage
Servers.
2Click [Edit] to display the [Storage Server Settings]
dialog box.
3Clear the check boxes next to the...")
46 Change the Destination of the Recording File and the Maximum Disk Usage Specify a drive for recording or change the maximum disk usage. Click [Do not limit] for each drive to display the maximum disk usage. Select the [Maximum Disk Space Used] check box and specify a maximum disk usage that does not exceed the total disk capacity. 1Select a Storage Server from the list of Storage Servers. 2Click [Edit] to display the [Storage Server Settings] dialog box. 3Clear the check boxes next to the...
Page 47
![Page 47
47
3
Storage Server Settings
You can add a camera to be used for displaying images
or recording to a Storage Server.
Note
The number of cameras you can add to a Storage Server
depends on the version of this software product.
You can add up to four cameras.
Display the [Cameras] Tab
Display the [Cameras] tab in the [Settings] dialog box to
start adding a camera.
➀[Storage Server Group]
Display the Storage Server Group name.
➁List of cameras
Displays a list of already added cameras.
➂[Find]
Search for...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-46.png "Page 47
47
3
Storage Server Settings
You can add a camera to be used for displaying images
or recording to a Storage Server.
Note
The number of cameras you can add to a Storage Server
depends on the version of this software product.
You can add up to four cameras.
Display the [Cameras] Tab
Display the [Cameras] tab in the [Settings] dialog box to
start adding a camera.
➀[Storage Server Group]
Display the Storage Server Group name.
➁List of cameras
Displays a list of already added cameras.
➂[Find]
Search for...")
47 3 Storage Server Settings You can add a camera to be used for displaying images or recording to a Storage Server. Note The number of cameras you can add to a Storage Server depends on the version of this software product. You can add up to four cameras. Display the [Cameras] Tab Display the [Cameras] tab in the [Settings] dialog box to start adding a camera. ➀[Storage Server Group] Display the Storage Server Group name. ➁List of cameras Displays a list of already added cameras. ➂[Find] Search for...
Page 48
![Page 48
48
The camera is added in the list of cameras on the
[Cameras] tab.
Images from a video camera connected to a multi-
terminal VB-EX50 cannot be displayed or recorded by this
software.
Assign Camera Tags
You can assign keywords, such as the installation
location, called camera tags, to the camera.
Click [Edit] in the [Add Camera] dialog box when you are
adding the camera to display the [Edit Tags] dialog box.
➀List of camera tags
Displays a list of assigned camera tags. Select the
check box of the...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-47.png "Page 48
48
The camera is added in the list of cameras on the
[Cameras] tab.
Images from a video camera connected to a multi-
terminal VB-EX50 cannot be displayed or recorded by this
software.
Assign Camera Tags
You can assign keywords, such as the installation
location, called camera tags, to the camera.
Click [Edit] in the [Add Camera] dialog box when you are
adding the camera to display the [Edit Tags] dialog box.
➀List of camera tags
Displays a list of assigned camera tags. Select the
check box of the...")
48 The camera is added in the list of cameras on the [Cameras] tab. Images from a video camera connected to a multi- terminal VB-EX50 cannot be displayed or recorded by this software. Assign Camera Tags You can assign keywords, such as the installation location, called camera tags, to the camera. Click [Edit] in the [Add Camera] dialog box when you are adding the camera to display the [Edit Tags] dialog box. ➀List of camera tags Displays a list of assigned camera tags. Select the check box of the...
Page 49
![Page 49
Add a Camera
49
3
Storage Server Settings
Note
You can only search for cameras on the same subnet as the
Storage Server. For details on how to add cameras on a
different subnet, see “Add Cameras One at a Time” (p. 47).
The names of the cameras (stored on the camera) are
displayed in the list in the [Camera Search Results] dialog box.
However, the VB-C300 camera name is not displayed.
Cameras that have already been added are also found.
However, a check box is not displayed next to the camera.
If...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-48.png "Page 49
Add a Camera
49
3
Storage Server Settings
Note
You can only search for cameras on the same subnet as the
Storage Server. For details on how to add cameras on a
different subnet, see “Add Cameras One at a Time” (p. 47).
The names of the cameras (stored on the camera) are
displayed in the list in the [Camera Search Results] dialog box.
However, the VB-C300 camera name is not displayed.
Cameras that have already been added are also found.
However, a check box is not displayed next to the camera.
If...")
Add a Camera 49 3 Storage Server Settings Note You can only search for cameras on the same subnet as the Storage Server. For details on how to add cameras on a different subnet, see “Add Cameras One at a Time” (p. 47). The names of the cameras (stored on the camera) are displayed in the list in the [Camera Search Results] dialog box. However, the VB-C300 camera name is not displayed. Cameras that have already been added are also found. However, a check box is not displayed next to the camera. If...
Page 50
![Page 50
50
Note
➀ to ➃ can only be changed if the camera is disabled
using [Disable Camera].
If a camera is not working, you can disable it to prevent
communication error notifications from being sent repeatedly.
If you replace a camera that is not working with another
camera, the host name, etc, is changed to that of the new
camera, so there will be no effect on existing recording
schedules and settings. (The replacement should be the same
model as the original camera.)
„Change the Thumbnail Image of a...](http://img.usermanuals.tech/thumb/14/1413/w300_recording-software-rm9-v10-1478297941_d-49.png "Page 50
50
Note
➀ to ➃ can only be changed if the camera is disabled
using [Disable Camera].
If a camera is not working, you can disable it to prevent
communication error notifications from being sent repeatedly.
If you replace a camera that is not working with another
camera, the host name, etc, is changed to that of the new
camera, so there will be no effect on existing recording
schedules and settings. (The replacement should be the same
model as the original camera.)
„Change the Thumbnail Image of a...")
50 Note ➀ to ➃ can only be changed if the camera is disabled using [Disable Camera]. If a camera is not working, you can disable it to prevent communication error notifications from being sent repeatedly. If you replace a camera that is not working with another camera, the host name, etc, is changed to that of the new camera, so there will be no effect on existing recording schedules and settings. (The replacement should be the same model as the original camera.) „Change the Thumbnail Image of a...