Canon recording software RM9 V10 User Manual

Chapter 2
Setup
❏How to install the software
❏Settings after installation 

32
Before Installation
About Licenses
You must have one license per installed computer.
To add Viewers, you must purchase the required number 
of licenses separately (p. 18).
Use an NTFS Formatted Drive
The drive you install the software on and the drive for 
saving recorded images must be in NTFS format.
Set Up the Cameras
You must set up any cameras that you will use with this 
software before starting operation. For details, refer to the 
camera manual.
Stop Other Applications
Stop other applications...

Installation
33
Setup
2
Note
 You can click [Change] to change the destination folder. 
However, we recommend that you do not change the 
destination.
 To check the available disk space on each drive of the 
computer and the disk space required for installation, click 
[Space].
 A dialog box asking you to specify the software to be 
installed is displayed. If you click [All], proceed to the step 6. If 
you click [Custom], the sample dialog box above is displayed. 
Select which application to install, the...

34
Configure the following settings after installing this 
software according to the operating system you are using:
(3: Required, 
—: Not required)
Windows Firewall Settings
If you install the Storage Server and the Viewer on 
different computers, you must change the Windows 
Firewall settings on the computer used for the Storage 
Server.
The changes to the settings are already complete if you 
selected the [Add storage server programs to the 
Windows Firewall exception list.] check box during...

Settings After Installation
35
Setup
2
Security Level Setting
In Internet Explorer, the default security level setting for 
Internet or intranet sites in Windows Server 2008 and 2008 
R2 is “High”. Therefore, you are not able to configure 
settings in the configuration or top page of the camera. 
Follow these steps to register the site as a trusted site.
Note
 For details on registration with trusted sites, click [Learn more 
about Internet Explorer’s Enhanced Security Configuration] in 
the [Internet...

36 

Chapter 3
Storage Server Settings
❏Adding cameras
❏Configuring the Storage Server Group
❏Adding users 

38
Flow of Storage Server Settings
Start the Viewer (p. 39)
Configure a Storage Server Group
Display the [Storage Server Group Settings] dialog box (p. 41)
Change the Storage Server Group name (p. 41)
Configure the recording settings (p. 41)
Configure the event priority and e-mail notifications (p. 42)
Configure a Storage Server
Display the [Servers] tab (p. 45)
Specify the storage period for recorded images (p. 45)
Change the destination of the recording file and the maximum disk usage (p. 46)
Add a...

39
3
Storage Server Settings
Double-click the [RM-Lite Viewer v1.1] icon on your 
desktop
Note
If the [User Account Control] dialog box appears, click [Yes] (or 
[Continue]).
➀[Host Name]
Enter the host name or the IP address of the Storage 
Server Group. If the Viewer and the Storage Server are 
installed on the same computer, enter “localhost”.
➁[Port]
Normally, leave [80] unchanged.
➂[User Name], [Password]
Enter your user name and password.
The default user name and password are:
User Name:...

40
„Specify the Storage Server Group for Starting 
the Viewer
You can start the Viewer using a Storage Server Group 
name instead of the host name of the server.
Double-click the [RM-Lite Viewer v1.1] icon on your 
desktop
Note
If the [User Account Control] dialog box appears, click [Yes] (or 
[Continue]).
➀[Group Name]
Display the Storage Server Group name.
➁[User Name] and [Password]
Enter the use name and password.
The default user name and password are:
User Name: administrator
Password: NVR...