Canon Projector SX50 User Manual
Here you can view all the pages of manual Canon Projector SX50 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
SETTING UP FUNCTIONS USING MENUS
Selecting from the Menu
(Example: Screen setup)
Making an Adjustment Using
the Slide Bar
(Example : Adjustment of Contrast)
Making a Setting in a Different
Window
(Example : Registration of User Logo)
Select the item you want to set.
Make a setting.
Make an adjustment or choice.
Select an item from the menu, make an
adjustment using the slide bar, or make
a setting in a different window accord-
ing to the purpose of setting.
Press the [OK] button.
The setting takes...](http://img.usermanuals.tech/thumb/14/98689/w300_projector_manual_2639_d-50.png "Page 51
51
SETTING UP FUNCTIONS USING MENUS
Selecting from the Menu
(Example: Screen setup)
Making an Adjustment Using
the Slide Bar
(Example : Adjustment of Contrast)
Making a Setting in a Different
Window
(Example : Registration of User Logo)
Select the item you want to set.
Make a setting.
Make an adjustment or choice.
Select an item from the menu, make an
adjustment using the slide bar, or make
a setting in a different window accord-
ing to the purpose of setting.
Press the [OK] button.
The setting takes...")
51 SETTING UP FUNCTIONS USING MENUS Selecting from the Menu (Example: Screen setup) Making an Adjustment Using the Slide Bar (Example : Adjustment of Contrast) Making a Setting in a Different Window (Example : Registration of User Logo) Select the item you want to set. Make a setting. Make an adjustment or choice. Select an item from the menu, make an adjustment using the slide bar, or make a setting in a different window accord- ing to the purpose of setting. Press the [OK] button. The setting takes...
Page 52
52 SETTING UP FUNCTIONS USING MENUS The projector automatically detects the input signal (ANALOG RGB) from the connected computer to make the optimum settings for the total number of dots, tracking, and so on. Perform the auto PC adjust- ment function. • Most computers can project an image optimally using an auto PC function. • Signal types supported by the computers that can use the auto PC function are listed in the table on page 84. • If an image cannot be projected correctly even with the auto PC...
Page 53
53 SETTING UP FUNCTIONS USING MENUS Adjust the total number of horizontal dots. Increase the total number of dots. Reduce the total number of dots. This adjustment is required when the auto PC adjustment cannot project images correctly. Adjusting the Total Number of Dots Adjust the tracking when the projected image flickers due to a tracking error. Increases the set value. Decreases the set value. • This adjustment is required when the auto PC adjustment cannot project images correctly. • The setting is...
Page 54
![Page 54
54
SETTING UP FUNCTIONS USING MENUS
Adjust the horizontal position of the
screen when the projected image is
shifted horizontally.
Moves the screen to the right.
Moves the screen to the left.
• This adjustment is required when
the auto PC adjustment cannot
project images correctly.
• The setting is recorded for the
[ANALOG RGB-1] signal and
[ANALOG RGB-2] signal
separately.
Adjusting the
Horizontal Position
Adjust the vertical position of the screen
when the projected image is shifted
vertically.
Moves...](http://img.usermanuals.tech/thumb/14/98689/w300_projector_manual_2639_d-53.png "Page 54
54
SETTING UP FUNCTIONS USING MENUS
Adjust the horizontal position of the
screen when the projected image is
shifted horizontally.
Moves the screen to the right.
Moves the screen to the left.
• This adjustment is required when
the auto PC adjustment cannot
project images correctly.
• The setting is recorded for the
[ANALOG RGB-1] signal and
[ANALOG RGB-2] signal
separately.
Adjusting the
Horizontal Position
Adjust the vertical position of the screen
when the projected image is shifted
vertically.
Moves...")
54 SETTING UP FUNCTIONS USING MENUS Adjust the horizontal position of the screen when the projected image is shifted horizontally. Moves the screen to the right. Moves the screen to the left. • This adjustment is required when the auto PC adjustment cannot project images correctly. • The setting is recorded for the [ANALOG RGB-1] signal and [ANALOG RGB-2] signal separately. Adjusting the Horizontal Position Adjust the vertical position of the screen when the projected image is shifted vertically. Moves...
Page 55
![Page 55
55
SETTING UP FUNCTIONS USING MENUS
When the vertical size of the screen is too
large or small, adjust it to the screen size.
Increase the number of horizontal
pixels.
Decrease the number of horizontal
pixels.
• This adjustment is required when
the auto PC adjustment cannot
project images correctly.
• The setting is recorded for the
[ANALOG RGB-1] signal and
[ANALOG RGB-2] signal
separately.
Adjusting the Number
of Vertical Pixels
When the horizontal size of the screen is
too large or small, adjust it...](http://img.usermanuals.tech/thumb/14/98689/w300_projector_manual_2639_d-54.png "Page 55
55
SETTING UP FUNCTIONS USING MENUS
When the vertical size of the screen is too
large or small, adjust it to the screen size.
Increase the number of horizontal
pixels.
Decrease the number of horizontal
pixels.
• This adjustment is required when
the auto PC adjustment cannot
project images correctly.
• The setting is recorded for the
[ANALOG RGB-1] signal and
[ANALOG RGB-2] signal
separately.
Adjusting the Number
of Vertical Pixels
When the horizontal size of the screen is
too large or small, adjust it...")
55 SETTING UP FUNCTIONS USING MENUS When the vertical size of the screen is too large or small, adjust it to the screen size. Increase the number of horizontal pixels. Decrease the number of horizontal pixels. • This adjustment is required when the auto PC adjustment cannot project images correctly. • The setting is recorded for the [ANALOG RGB-1] signal and [ANALOG RGB-2] signal separately. Adjusting the Number of Vertical Pixels When the horizontal size of the screen is too large or small, adjust it...
Page 56
56 SETTING UP FUNCTIONS USING MENUS When images from AV equipment is not projected correctly (irregular color or no image), you can select an input signal type manually. The input signal is automatically set. If images are not projected correctly in the Auto mode, select one of input signal types shown on the left. Confirm the input signal type according to the Users Manual that came with the AV equipment connected. Selecting an Input Signal Type (2) When two or more types of input signals are found...
Page 57
57 SETTING UP FUNCTIONS USING MENUS When the projected image size is larger/ smaller than the screen size. An image from the computer is projected fully on the screen. An image is projected in the maximum size with the aspect ratio unchanged. An image is projected at 16:9 aspect ratio with its width matching to the width of the screen. An image is projected in its original size (no enlargement/ reduction). • Set the display resolution of the computer to 1400 x 1050 dots or lower. • When Full screen is...
Page 58
![Page 58
58
SETTING UP FUNCTIONS USING MENUS
You can select the position of the menu
displayed on the screen.
Using [^], [], and [v] buttons, move
the menu position.
When the menu position is
determined, press the [OK] button
(the menu will disappear 30 seconds
later if no button is pressed).
Selecting a
Menu Position
Select a screen mode according to the
size of the image to be projected.
The screen mode is automat-
ically switched between [Nor-
mal] and [Wide Screen]
depending on the image from
the AV...](http://img.usermanuals.tech/thumb/14/98689/w300_projector_manual_2639_d-57.png "Page 58
58
SETTING UP FUNCTIONS USING MENUS
You can select the position of the menu
displayed on the screen.
Using [^], [], and [v] buttons, move
the menu position.
When the menu position is
determined, press the [OK] button
(the menu will disappear 30 seconds
later if no button is pressed).
Selecting a
Menu Position
Select a screen mode according to the
size of the image to be projected.
The screen mode is automat-
ically switched between [Nor-
mal] and [Wide Screen]
depending on the image from
the AV...")
58 SETTING UP FUNCTIONS USING MENUS You can select the position of the menu displayed on the screen. Using [^], [], and [v] buttons, move the menu position. When the menu position is determined, press the [OK] button (the menu will disappear 30 seconds later if no button is pressed). Selecting a Menu Position Select a screen mode according to the size of the image to be projected. The screen mode is automat- ically switched between [Nor- mal] and [Wide Screen] depending on the image from the AV...
Page 59
![Page 59
59
SETTING UP FUNCTIONS USING MENUS
A user’s unique image (logo) can be dis-
played when the power is turned on, there
is no input signal, or the image is blacked
out temporarily.
The image to be captured is
displayed on the screen. Place
the red frame on the capture
range and press [OK]. The
image in the red frame will be
captured.
Cancel registration of the image.
• The image on only one screen can
be captured.
• To display the captured image,
select “Logo capture” on the
“Projector on”, “No signal”,...](http://img.usermanuals.tech/thumb/14/98689/w300_projector_manual_2639_d-58.png "Page 59
59
SETTING UP FUNCTIONS USING MENUS
A user’s unique image (logo) can be dis-
played when the power is turned on, there
is no input signal, or the image is blacked
out temporarily.
The image to be captured is
displayed on the screen. Place
the red frame on the capture
range and press [OK]. The
image in the red frame will be
captured.
Cancel registration of the image.
• The image on only one screen can
be captured.
• To display the captured image,
select “Logo capture” on the
“Projector on”, “No signal”,...")
59 SETTING UP FUNCTIONS USING MENUS A user’s unique image (logo) can be dis- played when the power is turned on, there is no input signal, or the image is blacked out temporarily. The image to be captured is displayed on the screen. Place the red frame on the capture range and press [OK]. The image in the red frame will be captured. Cancel registration of the image. • The image on only one screen can be captured. • To display the captured image, select “Logo capture” on the “Projector on”, “No signal”,...
Page 60
![Page 60
60
SETTING UP FUNCTIONS USING MENUS
A logo can be displayed on the screen
when there is no input signal.
No logo is displayed (black
screen).
No logo is displayed (blue-
back).
The logo captured on the
“Logo capture” screen is dis-
played.
”User logo” cannot be selected
when no logo has been captured.
Displaying a Logo
(No signal screen)
A logo can be displayed on the screen
when the image is blacked out temporarily
by pressing the [NO SHOW] button.
No logo is displayed (black
screen).
No logo is...](http://img.usermanuals.tech/thumb/14/98689/w300_projector_manual_2639_d-59.png "Page 60
60
SETTING UP FUNCTIONS USING MENUS
A logo can be displayed on the screen
when there is no input signal.
No logo is displayed (black
screen).
No logo is displayed (blue-
back).
The logo captured on the
“Logo capture” screen is dis-
played.
”User logo” cannot be selected
when no logo has been captured.
Displaying a Logo
(No signal screen)
A logo can be displayed on the screen
when the image is blacked out temporarily
by pressing the [NO SHOW] button.
No logo is displayed (black
screen).
No logo is...")
60 SETTING UP FUNCTIONS USING MENUS A logo can be displayed on the screen when there is no input signal. No logo is displayed (black screen). No logo is displayed (blue- back). The logo captured on the “Logo capture” screen is dis- played. ”User logo” cannot be selected when no logo has been captured. Displaying a Logo (No signal screen) A logo can be displayed on the screen when the image is blacked out temporarily by pressing the [NO SHOW] button. No logo is displayed (black screen). No logo is...