Canon projector REALiS SX80 Maprojector Rk II User Manual

							81Setting Display Status
Setting Up Functions from Menus
Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
You can select a proper component signal 
type, if a video image from AV equipment 
is not projected correctly.
Press the OK button to accept your setting 
and then press the MENU button.
 [Auto] is the factory default.
 Refer to the Users Manual of your AV 
equipment connected to the projector to 
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) – 
Total Dots
[Input signal settings] - [Total dots]
You can adjust the total number of dots in 
the horizontal direction. 
Adjust it when stripes are displayed on the 
screen.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
 Perform this adjustment if the [AUTO 
PC] function (P57) cannot adjust the 
project image correctly.
 You can make adjustment either for 
[ANALOG PC-1] or [ANALOG PC-2].
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal select
Display settings
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal settings
Display settings
Total dots 
						

							Setting Display Status
82
Adjusting Input Signal (ANALOG PC) – 
Tracking
[Input signal settings] - [Tracking]
You can fine-tune the timing for generating 
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
 Perform this adjustment if the [AUTO 
PC] function (P57) cannot adjust the 
project image correctly.
 You can make adjustment either for 
[ANALOG PC-1] or [ANALOG PC-2].
Adjust Input Signal (ANALOG PC) – Hori-
zontal position
[Input signal settings] - [Horizontal position]
You can adjust the horizontal position of 
the screen when the projected image is 
shifted in the horizontal direction.
Use [] to select a value. As the value 
increases, the screen moves to the left.
When you have completed the adjust-
ment, press the MENU button.
 Perform this adjustment if the [AUTO 
PC] function (P57) cannot adjust the 
project image correctly.
 You can make adjustment either for 
[ANALOG PC-1] or [ANALOG PC-2].
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal settings
Display settings
Tracking
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal settings
Display settings
Horizontal position 
						

							83Setting Display Status
Setting Up Functions from Menus
Adjust Input Signal (ANALOG PC) – Vertical 
position
[Input signal settings] - [Vertical position]
You can adjust the vertical position of the 
screen when the projected image is 
shifted in the vertical direction.
Use [] to select a value. As the value 
increases, the screen moves upward.
When you have completed the adjust-
ment, press the MENU button.
 Perform this adjustment if the [AUTO 
PC] function (P57) cannot adjust the 
project image correctly.
 You can make adjustment either for 
[ANALOG PC-1] or [ANALOG PC-2].
Adjust Input Signal (ANALOG PC) – Hori-
zontal pixels
[Input signal settings] - [Horizontal pixels]
You can adjust the number of the pixels in 
the horizontal direction if the length of the 
screen is too long or too short in the hori-
zontal direction.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
 Perform this adjustment if the [AUTO 
PC] function (P57) cannot adjust the 
project image correctly.
 You can make adjustment either for 
[ANALOG PC-1] or [ANALOG PC-2].
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal settings
Display settings
Vertical position
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal settings
Display settings
Horizontal pixels 
						

							Setting Display Status
84
Adjust Input Signal (ANALOG PC) – Vertical 
pixels
[Input signal settings] - [Vertical pixels]
You can adjust the number of the pixels in 
the vertical direction if the length of the 
screen is too long or too short in the verti-
cal direction.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
 Perform this adjustment if the [AUTO 
PC] function (P57) cannot adjust the 
project image correctly.
 You can make adjustment either for 
[ANALOG PC-1] or [ANALOG PC-2].
Selecting HDMI Input Level (SX80 II)
[HDMI input level]
You can select this as required when you 
project visual software with the HDMI sig-
nals.
Press the OK button to accept your setting 
and then press the MENU button.
 [Auto] is the factory default.
 You can select this only when the type of 
signal sent from AV equipment is RGB.
 The signal level is select automatically in 
[Auto] mode. (Some AV equipment may 
not support this.)
 If the HDMI output of your AV equipment 
allows switching between [Normal] and 
[Expanded], we recommend you to set 
[Expanded]. The contrast of images will 
be improved and dark scenes will be 
rendered more realistically. In this case, 
select [Auto] or [Expanded] for the 
HDMI input level.
For more detailed information, refer to 
the Users Manual of your AV equipment 
connected to the projector.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal settings
Display settings
Vertical pixels
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
HDMI input level
Display settings 
						

							85Setting Display Status
Setting Up Functions from Menus
Select HDMI Over Scan (SX80 II)
[HDMI over scan]
You can select this as required when you 
project visual software with the HDMI sig-
nals.
Press the OK button to accept your setting 
and then press the MENU button.
 [On] is the factory default.
Performing Progressive Processing
[Progressive]
You can select this as required when the 
images have low resolution.
Press the OK button to accept your setting 
and then press the MENU button.
 [Auto] is the factory default.
 You can set this mode for either [HDMI 
(SX80 II)], [COMPONENT], [VIDEO] or 
[S-  VIDEO (SX80 II)].
 Select [Off] when flickers and horizontal lines 
are noticeable on a fast-moving picture.
 For the details of the progressive pro-
cessing, refer to the page 154.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffThe entire input signals (100%) are pro-
jected.
The images projected may be smaller 
than the full projection screen.
OnImages are projected with disorders at 
their peripheral section of images 
trimmed off. (The central 95% of the 
images are projected.)
A part of peripheral sections of images 
may be cut out depending on the resolu-
tion of the signals. In such a case, select 
[Off].
HDMI over scan
Display settings
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffDo not perform the progressive pro-
cessing.
OnPerforms the progressive processing.
This mode is available when the 
HDMI signal is 1080i or, VIDEO/S-
VIDEO or COMPONENT signal is 
1080i, 1035i, 576i, or 480i.
AutoPerforms the appropriate progres-
sive processing according to the 
input signal.
Progressive
Display settings 
						

							Setting Display Status
86
Selecting a Menu Position
[Menu position]
You can change the position of menu dis-
played.
Move the menu to the desired position with [ ] / 
[].
When the menu has been moved to the desired 
position, press the OK or MENU button.
Correcting the Screen Color
[Screen color]
You can adjust the color quality of the images 
projected corresponding to the color of the pro-
jection screen.
Press the OK button to accept your setting and 
then press the MENU button.
 [Normal] is the factory default.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Menu position
Display settings
<
<
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
NormalSelect this if a standard type of projec-
tion screen is used. The images are 
projected in the light quality similar to 
that of natural light.
Green-
board
Select this if a greenboard (in dark 
green color) is used for the projection 
screen. The color quality similar to [Nor-
mal] is obtained on the greenboard.
AdjustSelect this if you make detailed adjust-
ment. The following popup screen will 
appear.
Use [ ] / [ ] to select a primary color.
[>] makes the color selected darker.
[
						

							87Setting Display Status
Setting Up Functions from Menus
Reversing projection
[Image flip H/V]
You can make this setting if you want to 
hang the projector from the ceiling or 
project an image from behind the screen.
Press the OK button to accept your setting 
and then press the MENU button.
 [None] is the factory default. To hung the projector from the ceiling, 
use the optional bracket. Contact your 
Canon dealer.
 The keystone distortion adjustment will 
be reset.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
NoneSelect this if you project an image 
normally.
Ceiling 
mountedSelect this if you project an image 
with the projector hung from the 
ceiling.
The projected images is inverted 
in both vertical and horizontal 
directions.
RearSelect this if you project an image 
from behind the screen.
The projected images is inverted 
in the horizontal direction.
Rear, Ceil-
ing mountedSelect this if you project an image 
from behind the screen with the 
projector hung from the ceiling.
The projected image is inverted in 
the vertical direction.
Image flip H/V
Display settings
None (Normal image)
Ceiling mounted
Rear
Rear, Ceiling mounted 
						

							Setting Display Status
88
Capturing a Logo (SX800)
[User screen settings] - [Logo capture]
You can capture a part of the images 
being projected as [User logo].
A screen for capturing images is dis-
played.
 For projecting the captured log on a 
screen, select [User logo] on the [Pro-
jector on], [No signal screen], [Screen 
when blank].
 You may not capture an image depend-
ing on the resolution and scan system.
 You cannot capture an image when 
[16:9] or [16:9 D. image shift] is 
selected for [Screen aspect].
Selecting the User Logo Display Position 
(SX800)
[User screen settings] - [Logo position]
You can select a log display position.
Press the OK button to accept your setting 
and then press the MENU button.
 [Center] is the factory default.
 You cannot select [Logo position] if you 
have not captured a user logo on the 
[Logo capture] screen.
ANALOG PC
COMPONENT
VIDEO
OKPress the OK button, and the image 
in the red frame is captured as [User 
logo].
CancelCancels the image capturing.
User screen settings
Display settings
Logo capture
ANALOG PC
COMPONENT
VIDEO
Upper L
Upper R
Center
Lower L
Lower RSelect a position you want to dis-
play a user logo and press the 
OK button.
User screen settings
Display settings
Logo position 
						

							89Setting Display Status
Setting Up Functions from Menus
No Signal Screen (SX80 II)
[User screen settings] - [No signal screen]
You can display either of a black or blue 
screen when there is no input signal.
Press the OK button to accept your setting 
and then press the MENU button.
 [Blue] is the factory default.
Screen When Blank (SX80 II)
[User screen settings] - [Screen when blank]
You can display a black or blue screen 
when the projected image is blanked off 
temporarily by pressing the BLANK button 
on the remote control.
Press the OK button to accept your setting 
and then press the MENU button.
 [Black] is the factory default.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
BlackThe screen is all black.
BlueThe screen is blue background.
User screen settings 
Display settings
No signal screen
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
BlackThe screen is all black.
BlueThe screen is blue background.
User screen settings
Display settings
Screen when blank 
						

							Setting Display Status
90
Selecting a Logo at Startup (SX80 II)
[User screen settings] - [Projector on]
You can display a specified logo on a 
screen from the moment the projector is 
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting 
and then press the MENU button.
 [Canon logo] is the factory default.
No Signal Screen (SX800)
[User screen settings] - [No signal screen]
You can display a user logo on a screen 
when there is no input signal.
Press the OK button to accept your setting 
and then press the MENU button.
 [Blue] is the factory default.
 [User logo] is available only when a 
users logo has been registered.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
SkipProjects an input signal immedi-
ately after turning on the projec-
tor.
Canon logo
Displays the Canon logo cap-
tured at the factory.
User screen settings 
Display settings
Projector on
ANALOG PC
COMPONENT
VIDEO
BlackThe screen is all black.
Displays no user logo.
BlueThe screen is blue background.
Displays no user logo.
User logoDisplays a user logo.
User screen settings 
Display settings
No signal screen