Canon projector REALiS SX80 Maprojector Rk II User Manual

							11Table of Contents
Table of ContentsSupported Computer Signal Types ........................................................................ 150
Relationship between Screen Size and Projecting Distance ............................... 151
Glossary .................................................................................................................... 152
Specifications ........................................................................................................... 156
■ Projector ........................................................................................................................ 156
■ Remote Control .............................................................................................................. 156
■ External View ................................................................................................................. 157
■ ANALOG PC-1 (SX800), ANALOG PC-2/COMPONENT IN terminal ............................. 157
■ Service Port (CONTROL) ............................................................................................... 158
Index ..........................................................................................................................160
Menu Configuration ................................................................................................. 164 
						

							12
Safety Instructions
Before operating this projector, read this manual thoroughly in order to operate the 
projector properly.
This projector offers many convenient features and functions. Operating the projector 
properly enables you to manage those features and maintain it in good condition for a 
long period.
Improper operation may result in not only reducing the product-life, but also malfunctions, 
fire hazards, or other accidents.
If your projector is not operating correctly, read this manual again, check operations and 
cable connections, and try the solutions shown in the Troubleshooting section at the end 
of this booklet. If the problem still persists, contact the service center or the dealer where 
you purchased the projector.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 
COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS 
INSIDE EXCEPT LAMPS. REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE 
CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN 
THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING 
AND MAINTENANCE INSTRUCTIONS FOR THIS UNIT IN THE 
OWNERS MANUAL.
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of Electronic 
Computer/Data Processing Equipment, ANSI/NFPA 75.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN 
						

							13Safety Instructions
Safety Instructions
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
 This projector projects intense light from the projection lens. Do not stare directly into 
the lens if possible, as doing so may result in eye damage. Be especially careful that 
children do not stare directly into the beam.
 Install the projector in an appropriate position.
Installing the projector in an inappropriate position may result in a fire hazard.
 Allow for appropriate space above beside and behind of the projector cabinet for 
allowing air circulation and cooling of the projector. Minimum clearances must be 
maintained. If the projector is to be built into a compartment or similarly space, the 
minimum distances must be maintained. Do not cover the ventilation slot on the 
projector. Heat build-up can reduce the service life of your projector, and can also be 
dangerous.
 Do not put any flammable objects or spray cans near the projector, as the hot air 
exhausted from the ventilation holes may result in an explosion.
 If the projector is not to be used for an extended period of time, unplug it from the 
power outlet.
SIDE and TOP REAR
1 m (3.3) 1 m (3.3) 1 m (3.3)
1 m (3.3) 
						

							Safety Instructions
14
■READ AND KEEP THIS OWNERS MANUAL FOR LATER USE.
All the safety and operating instructions should be read before beginning to operate the 
product.
Read all of the instructions given here and retain them for later use. Unplug this projector 
from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the 
projector. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection of the projector during a lightning storm, or when it is left 
unattended or unused for long periods of time, unplug it from the wall outlet. This will 
prevent damage due to lightning and power surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a 
swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may result in 
hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, 
causing serious injury to a child or adult, and serious damage to the projector. Use only 
with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or 
shelf mounting should be carried out in accordance with the manufacturers directions, 
and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause the 
appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided 
for ventilation, to insure reliable operation of the equipment and to 
protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom 
opening should not be blocked by placing the projector on a bed, sofa, rug, or other 
similar surface. This projector should never be placed near or over a radiator or heat 
register.
This projector should not be placed in a built-in installation such as a book case unless 
proper ventilation is provided. 
						

							15Safety Instructions
Safety Instructions
Never push objects of any kind into this projector through cabinet slots as they may touch 
dangerous voltage points or short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind onto the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on the 
marking label. If you are not sure of the type of power supplied, consult your authorized 
dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. 
Do not allow anything to rest on the power cord. Do not locate this projector where the 
cord may be damaged by people walking on it.
Do not attempt to service this projector yourself as opening or removing covers may 
expose you to dangerous voltages or other hazards. Refer all servicing to qualified 
service personnel.
Unplug this projector from the wall outlet and refer servicing to qualified service 
personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally after following the operating instructions. 
Adjust only those controls that are covered in the operating instructions as improper 
adjustment of other controls may result in damage and will often require extensive 
work by a qualified technician to restore the projector to normal operating condition.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a need 
for servicing.
When replacement parts are required, be sure the service technician uses replacement 
parts specified by the manufacturer that have the same characteristics as the original 
parts. Unauthorized substitutions may result in fire, electric shock, or injury.
Upon completion of any service or repairs to this projector, ask the service technician to 
perform routine safety checks to determine that the projector is in safe operating 
condition. 
						

							
Safety Instructions16
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the 
country you purchased it.
THE SOCKET-OUTLET SHOULD BE IN STALLED NEAR THE EQUIPMENT AND 
EASILY ACCESSIBLE.
AC Power Cord for the United States and Canada:
The AC Power Cord used in t he United States and Canada is 
listed by the Underwriters Labora tories (UL) and certified by the 
Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug. This is a 
safety feature to ensure the plug fits into the power outlet. Do not 
try to tamper with this safety fe ature. Should you be unable to 
insert the plug into the outlet, contact your electrician.
NOTE FOR CUSTOMERS IN THE US
LAMP(S) INSIDE THIS PRODUCT CONTAI N MERCURY AND MUST BE RECYCLED 
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
European Union (and EEA) only.
These symbols indicate that this product  is not to be disposed of with 
your household waste, according to  the WEEE Directive (2002/96/EC), 
the Battery Directive (2006/66/EC ) and/or your national laws 
implementing those Directives. If a chemical symbol is printed beneath 
the symbol shown above, in accorda nce with the Battery Directive, this 
indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = 
Lead) is present in this battery or accumulator at a concentration above 
an applicable threshold specified in the Battery Directive. This product 
should be handed over to a designat ed collection point, e.g., on an 
authorized one-for-one basis when yo u buy a new similar product or to 
an authorized collection site for recycling waste electrical and 
electronic equipment (EEE) and batt eries and accumulators. Improper 
handling of this type of waste  could have a possible impact on the 
environment and human health du e to potentially hazardous 
substances that are generally associ ated with EEE. Your cooperation in 
the correct disposal of this product  will contribute to the effective usage 
of natural resources. For more information about the recycling of this 
product, please contact your local city office, waste authority, approved 
scheme or your household waste  disposal service or visit 
www.canon-europe.com/environment
.
(EEA: Norway, Iceland and Liechtenstein)
Ground 
						

							17Safety Instructions
Safety Instructions
Federal Communication Commission Notice
Multimedia Projector, Mo
del: SX80 MarkII/SX800
This device complies with Part 15 of the FCC Ru les. Operation is subject to the following 
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may  cause undesired operation.
Note: This equipment has been tested and foun d to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful  interference in a residential installation. 
This equipment generates, uses and can ra diate radio frequency energy and, if not 
installed and used in accordance with the  instructions, may cause harmful interference 
to radio communications. However, there is  no guarantee that interference will not occur 
in a particular installation. If this equipmen t does cause harmful interference to radio or 
television reception, which can be determined  by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures:
 Reorient or relocate the receiving antenna. 
 Increase the separation between the equipment and receiver. 
 Connect the equipment into an outlet on a circuit different from that to which the  receiver is connected.
 Consult the dealer or an experie nced radio/TV technician for help.
The cable with a ferrite core provided with  the projector must be used with this 
equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC 
rules.
Use of a shielded cable is required to compl y with class B limits in Subpart B of Part 15 
of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified 
in the instructions. If such changes or mo difications should be made, you could be 
required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003. 
						

							Safety Instructions
18
Precautions on Handling the Batteries in the Remote Controller
Lamp Handling Precautions
This projector uses a high-pressure mercury lamp which must be handled carefully and 
correctly as mentioned below.
The mercury lamp has the following characteristics.
 A lamp may explode with a loud sound or burn out due to a shock, scratch, or use 
beyond its expiry date.
 The lamp life may differ from lamp to lamp and according to the usage environment. 
There is no guarantee that all lamps will last for the same period of time. Some lamps 
may fail in a shorter period of time than other similar lamps.
 A lamp gradually becomes darker over time. Observe the following precautions when handling the batteries. Failure to do so 
may cause explosion, heat generation, fire, or leakage of the battery fluid.
 Do not heat or disassemble the batteries, or throw them into fire.
 Do not attempt to recharge the batteries.
Observe the following precautions when handling the batteries. Failure to do so 
may cause explosion, heat generation, fire or leakage of the battery fluid.
 Remove the batteries when they have been exhausted or not in use for an 
extended period of time.
 Be sure to replace both batteries at the same time. Do not mix batteries of 
different types.
 Insert batteries correctly according to the + and – markings.
 If a fluid from a battery leaks and comes in contact with your skin, rinse the 
affected skin thoroughly as soon as possible.
If a Lamp Explodes
 If a lamp explodes, gas or dust may come out of the exhaust vent. Open win-
dows and doors for ventilation.
 The gas contains toxic mercury. Always keep your face away from the 
exhaust vent when the projector is operating to avoid inhaling mercury 
vapors or to prevent it from getting in your eyes or mouth.
 If you inhale the gas or the shards of the broken lamp contact your eyes or 
mouth, consult a doctor immediately.
 If a lamp explodes, its shards may scatter inside the projector. Ask the Canon 
service representative to clean and check the inside of the projector and 
replace the lamp.
If the projector indicates that the lamp should be replaced (i.e., the LAMP 
REPLACE indicator lights up twice), 
 The chances of an explosion increase. Replace the lamp with a new one 
immediately if such is the case.
Caution
War ning
War ning
Caution 
						

							19Safety Instructions
Safety Instructions
Carrying/Transporting the Projector
Installation Precautions
Disposal of Waste Lamp
 Dispose of the projectors mercury lamp according to local regulations just 
like the fluorescent lamps.
 This projector is a precision machine. Do not subject the projector to strong 
shocks or vibrations or turn it down.
 Install the lens cap to protect the lens and put the projector in the carrying 
bag to protect it from dust and scratches on the surface of it when you carry 
the projector. For details, see P23.
 Wait until the cooling fan stops before putting the projector in the carrying 
bag. Do not put the projector in the carrying bag until the cooling fan stops 
rotating. The projector may be damaged due to the heat.
 Replace the adjustable foot before putting the projector in the carrying bag. 
The projector may be damaged if you put it in the bag without replacing the 
adjustable foot.
 The carrying bag is not designed to protect the projector from external 
shocks. When carrying the projector with it put in the carrying bag, do not 
give a shock to it, drop it, or place anything on it. The projector may be dam-
aged or malfunctioned.
 Do not transport the projector through a courier or transport service with the 
carrying bag. Put the projector in an impact-resistant transport case if such is 
the case.
The area around the exhaust vent and the cabinet above the exhaust vent 
become hot when the projector is operating.
 Do not touch these areas, or you may get burnt. In particular, keep children 
away from these areas. Do not put anything that may deform or discolor due 
to heat on the projector.
Hot air is exhausted from the exhaust vent. Observe 
the following:
 Do not put any metallic object on the projector. It 
may become hot, resulting in accident or injury.
 Do not seat anyone near the exhaust vent. Other-
wise, you may get burned.
When placing the projector on a castered stand or table, be sure to lock the 
casters.
 Failure to do so may cause the projector to move or topple, resulting in an 
injury.
Caution
Caution
Caution
Hot air 
						

							Safety Instructions20
Position the projector in a horizontal position. Incorrect installation may cause 
troubles and accidents.
 Do not tilt the projector more than 20 degrees above and below the horizontal.
 When you want to use your projector point- ing up or down, make sure to place the pro-
jector straight up or down.
Do Not Use in the Following Environments
 Do not place the projector on an unsta ble or slanted surface. The projector 
may fall causing a personal injury.
 Do not place it in an oily, smoky, or damp location (e.g., near a cooking table  or a humidifier). It may cause a fire or an electric shock.
 Place the projector with a minimum distance of 1 m (3.3) from its left, right,  rear, and top panels to the neighboring  object such as a wall. Otherwise, it 
may damage the projector due to bad exhaust ventilation.
 Do not put anything near the exhaust ve nt that may deform or deteriorate 
due to heat.
 Do not install the projector in a humid  or dusty location or a position where 
there is a lot of oily or cigarette smoke. Optical parts such as a lens and mir-
ror may be stained, resulting in poor picture quality.
 Do not place it near an exhaust outlet  of air-conditioning equipment. Other-
wise, it may be damaged.
If the projector is carried from a cold place to a warm place or the room tem-
perature is raised rapidly, condensation  may form on the lens and mirror due to 
the moisture in the atmosphere, resultin g in a blurred picture. Wait until con-
densation evaporat es and normal picture is shown.
Do not use the projector in a place subject to either very high or very low tem-
peratures. Doing so may cause malfunct ion. The ranges of the operating and 
storage temperatures  are as shown below:
Operating temperature: +5°C to +35°C (Humidity: 85% or below)
Storage temperature: -10°C to +60°C
Using the Projector at 1900 Meters or More Above Sea Level
 If you use the projector at 1900 meters or more above sea level, the special  configuration is required to cool down  the projector properly. Contact your 
dealer.
Caution
20°
20°