Canon projector REALiS SX80 Maprojector Rk II D User Manual

151
Appendix
Relationship between Screen Size and Projecting Distance
* The values in the table above are approximations rounded off.Screen size at 4:3 aspect ratio
Type - W x D cmProjecting distance
m (feet)
Max. zoomingProjecting distance
m (feet)
Min. zoomingScreen size at 16:9 aspect ratio
W x D cm
40 (81 x 61)1.2(3.9)1.7(5.6)81 x 46
50 (102 x 76) 1.5 (4.9) 2.2 (7.1) 102 x 57
60 (122 x 91)1.8(5.9)2.6(8.5)122 x 69
70 (142 x 107) 2.1 (6.9) 3.1 (10.0) 142 x 80
80 (163 x 122)2.4(7.9)3.5(11.4)163 x 91
90...

152
Glossary
* is only applicable to SX80 MarkII
An international standard of color repre-
sentation (color space) which is applied to 
general digital cameras, displays and oth-
ers. In this projector, if you select [sRGB] 
in the [Image mode] setting, the projector 
can project the best-quality image con-
forming to the sRGB Standard.
A digital video signal connection interface 
for a computer. This interface allows digi-
tal data to be transmitted without convert-
ing to analog data, assuring high...

Glossary
153
Appendix
The aspect ratio is the ratio of the horizon-
tal dimension (width) to the vertical dimen-
sion (height) of a screen. It is expressed 
as width : height.
The following aspect ratios are normally 
used in Computer or AV equipment.
[4:3]
The aspect ratio for SXGA+ (1400 x 1050) 
and XGA (1024 x 768) display resolution in 
PC or for the traditional television screen.
The aspect ratio for this projector is 4:3.
[5:4]
The aspect ratio for SXGA (1280 x 1024) 
display resolution.
[16:9]...

Glossary
154
Number of dots in each resolution
If you select SXGA+ (1400 dots x 1050 
dots) as the display resolution for the con-
necting computer, this projector can 
project high-resolution images. If your 
computer does not have the SXGA+ 
option, select the maximum resolution 
among the selectable options.
An image display system used to display 
the entire screen per scan. For an inter-
lace signal (video signal) that displays one 
screen by two scans (one for odd lines 
and one for even lines) is...

Glossary
155
Appendix
A parameter that adjusts the reproduction 
range of a brightness signal from black to 
white within the image signal to naturally 
reproduce it on the screen. The reproduc-
ibility of the bright tone is mainly changed. 
Since you can adjust the gain for each 
RGB color in this projector, you can also 
adjust colors. The gain is normally 
adjusted with the offset.
A memorized color is a color in our mem-
ory. The memorized color such as blue for 
the sky is more vivid than the real...

156
Specifications
■Projector
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteris-
tics of the LCD panel. 
* Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
■Remote Control
Model name SX80 MarkII/SX800
Display system RGB liquid crystal system
Optical systemColor separation by dichroic mirror/polarizing beam splitter and color composition by 
prism...

157Specifications
Appendix
■External View
■ANALOG PC-1 (SX800), ANALOG PC-2/COMPONENT IN terminal
This terminal is used as a computer analog PC input or component input terminal. Use a 
D-sub computer cable for connection.
The terminal specifications for the analog PC input and component input are the same.
Mini D-sub 15-pin
45 mm (1.80)59.3 mm (2.37)
332 mm (13.28)340 mm (13.60)
121 mm (4.84)
135.9 mm (5.44)
136.8 mm
(5.47) 133.0 mm
(5.32)
Screw Holes for Installation 
of ceiling-mount hanger 
(M4 x 5)...

Specifications
158
■Service Port (CONTROL)
D-sub 9pin
Control Commands
Function ASCII Representation Binary Representation
Power 
supplyOn POWER ON 50h 4Fh 57h 45h 52h 20h 4Fh 4Eh 0Dh
Off POWER OFF  50h 4Fh 57h 45h 52h 20h 4Fh 46h 46h 0Dh
Get GET POWER 47h 45h 54h 20h 50h 4Fh 57h 45h 52h 0Dh
Input 
signalsDigital PC 
(SX80 II)INPUT=D-RGB 49h 4Eh 50h 55h 54h 3Dh 44h 2Dh 52h 47h 42h 0Dh
HDMI 
(SX80 II)INPUT=HDMI 49h 4Eh 50h 55h 54h 3Dh 48h 44h 4Dh 49h 0Dh
Analog PC-1 INPUT=A-RGB1 49h 4Eh 50h 55h 54h 3Dh...

159Specifications
Appendix
Lamp 
modeNormal LAMP=NORMAL 4Ch 41h 4Dh 50h 3Dh 4Eh 4Fh 52h 4Dh 41h 4Ch 0Dh
Quiet LAMP=SILENT 4Ch 41h 4Dh 50h 3Dh 53h 49h 4Ch 45h 4Eh 54h 0Dh
Get GET LAMP 47h 45h 54h 20h 4Ch 41h 4Dh 50h 0Dh
BLANKBlank On BLANK=ON 42h 4Ch 41h 4Eh 4Bh 3Dh 4Fh 4Eh 0Dh
Blank Off BLANK=OFF 42h 42h 4Ch 41h 4Eh 4Bh 3Dh 4Fh 46h 46h 0Dh
Get GET BLANK 47h 45h 54h 20h 42h 4Ch 41h 4Eh 4Bh 0Dh Function ASCII Representation Binary Representation 

160
Index
Numerics
6-axis color adjust (SX80 II) ......... 100, 155
A
Adjustable foot ...................................... 37
Adjusting keystone distortion
 ................ 60
Adjusting the focus
 ............................... 59
Adjusting the volume
 ............................ 71
Air filter
 ................................................ 144
Ambient light (SX80 II)
 ........................ 101
ANALOG PC
 .................................... 40, 54
Analog PC...