Canon projector REALiS SX80 Maprojector Rk II D User Manual

101Setting the Image Quality
Setting Up Functions from Menus
Correcting the Image According to the 
Ambient Light (SX80 II)
[Ambient light]
You can correct and project an image 
more appropriately according to the ambi-
ent light on the screen if you have 
selected [Photo] 
for [Image mode]. An Example of the Ambient Light Setting
Press the 
OK button to accept your setting 
and then press the  MENU button.
 [Off] is the factory default.
 You can set this if you have selected  [Photo] for [Image mode]....

Setting the Image Quality
102
Reducing the Lamp Brightness
[Lamp mode]
Reducing the lamp brightness reduces 
power consumption and cooling fan noise. 
You can enable or disable this mode also 
with the LAMP button on the remote con-
trol.
SX80 MarkII
Press the OK button to accept your setting 
and then press the MENU button.
 [Normal] is the factory default.
 The setting you have made is stored as 
a setting value of input signals being 
projected in an image mode.
Resetting the Image Settings
[Reset]...

103
Setting Up Functions from Menus
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an items you want to enable 
in the auto setup function.
SX80 MarkII
Select [On] for the items if you want to 
enable in auto setup function.
Press the OK button to accept your setting 
and then press the MENU button.
 The factory default settings are as follows:
[Auto focus*]: [On]
[Auto keystone]: [On]
[Auto input]: [On]
[Auto screen color*]: [Off]
 You cannot change any items in [Auto...

Setting Various Function
104
Skip the POWER Button Operation
[Direct power on]
You can turn on the projector only by con-
necting the power cable without pressing 
the POWER button.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
Enabling/Disabling the Beep
[Beep]
You can select whether a beep sounds or 
not when you operate the projector.
Press the OK button to accept your setting 
and then press the MENU button.
 [On] is the factory default....

105Setting Various Function
Setting Up Functions from Menus
Prohibiting the Projector Operation
[Key lock]
You can prohibit the operation of the projector 
from either the top control or remote control.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
Selecting a Display Language
[Language]
You can select the language in which the 
menu is displayed.
Use [ ] / [ ] / [] to select the lan-
guage to be used in the menu, then press 
the OK button....

Setting Various Function
106
Showing/hiding the Guide Screen
[Guide]
You can select whether to show or hide the 
guide screen which explains operations.
Press the OK button to accept your setting 
and then press the MENU button.
 [On] is the factory default.
 The guide screen is shown when:
- Power is turned off by pressing the 
POWER button (P68).
- No input signal can be detected 
(P51).
- An invalid button is pressed in the 
[BLANK], [FREEZE], or [D.ZOOM] 
mode (P70, 72).
Turning on/off LED...

107Setting Various Function
Setting Up Functions from Menus
Setting for Slideshow (SX80 II)
[Slideshow interval]
You can project the images stored in a 
PictBridge-compatible device (P114) or a 
USB flash memory (P118) in the slide-
show.
Use [] to set the interval (minutes: 
seconds) of projection (60 minutes = max-
imum).
Set [-- : --] if no slideshow is performed.
When the setting is completed, press the 
MENU button.
 [-- : --] is the factory default.
 The maximum length of slideshow time 
is 60...

Setting Various Function
108
Extending the Menu Display Time
[Other settings] - [Menu display time]
You can extend the menu display time, 
which is 30 seconds usually, to 3 minutes.
Press the OK button to accept your setting 
and then press the MENU button.
 [Normal] is the factory default.
 You cannot extend the display time for 
the window indicating the completion of 
Auto setup (P53), the guide window 
(P106), the lamp replacement window 
(preparation) (P145), or the lamp 
replacement window...

109Setting Various Function
Setting Up Functions from Menus
Registering a Password
[Other settings] - [Register password]
You can register a password for starting 
projection.
Press the OK button after selecting [Reg-
ister password], and the following screen 
for registering a password appears:
Enter a 4-digit password using [ ] / [] (e.g.,  , 

Setting Various Function
110
Select [OK] on the screen for confirmation, 
press the OK button, and the lamp counter 
is reset.
Press the MENU button.
■About the Display of the Lamp Counter
The lamp counter displays the hours of 
use of the lamp in the following way:
Less than 1,800 hours
Displayed in green bar.
1,800 – less than 2,000 hours
Displayed in green and yellow bar.
For 1,800 – less than 2,000 hours, a mes-
sage Obtain a new lamp. appears when 
power is turned on.Over 2,000 hours
Displayed in...