Canon projector REALiS SX6 User Manual

							101
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality
Adjusting the Brightness
[Brightness]
You can adjust the brightness of an image when
it is too bright or dark.
T
T
Press the [MENU] button when you finish.
Adjusting the Contrast
[Contrast]
You can adjust the contrast of an image if you
want to make it more or less vivid, adjust the dif-
ference in tone between the lightest and darkest
portions of the image.
T
T
Press the [MENU] button when you finish.
Image adjustment
Brightness
Increases the brightness of an
image.
Decreases the brightness of an
image.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
>

< 
						

							102
SETTING UP FUNCTIONS FROM MENUS
Adjusting the Sharpness
[Sharpness]
You can adjust the sharpness when you want to
make an image sharper or softer.
T
T
Press the [MENU] button when you finish.
Making a Gamma Correction
[Gamma]
You can make a gamma correction if light or
dark portions of an image are obscure.
T
T
Press the [MENU] button when you finish.
Image adjustment
Sharpness
Increases the sharpness of an
image.
Decreases the sharpness of an
image.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
>

< 
						

							103
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality
Making Color Adjustment (1)
[Color adjustment]
You can make color adjustment for each color
(red, green, and blue).
T
T
Press the [MENU] button when you finish.
Making Color Adjustment (2)
[Color adjustment]
You can adjust color level and color balance and
make color adjustment for each color (red,
green, and blue).
T
T
Press the [MENU] button when you finish.
Image adjustment
Color adjustment
Adjusts the intensity of each color.
[>] Increases the color intensity.
[] Increases the color reproducibil-
ity of color.
[] Increases the intensity of color.
[] Corrects a reddish image.
[
						

							104
SETTING UP FUNCTIONS FROM MENUS
Making Advanced Color Adjustment (1)
[Dynamic gamma]
You can adjust the gradation representation of
light and dark portions of an image automati-
cally.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Making Advanced Color Adjustment (2)
[Mem. color correct]
You can correct colors (e.g. blue sky) in our
memory so that they can be projected more viv-
idly.
T
T
T
Press the [MENU] button when you finish.
Image adjustment
Advanced adjustment
Dynamic gamma
Enables dynamic gamma.
Disables dynamic gamma.
zDynamic gamma automatically opti-
mizes image quality.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
On
OffImage adjustment
Advanced adjustment
Mem. color correct
Disables the memorized color cor-
rection function.
Specifies the intensity of the memo-
rized color correction in three steps.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
L
M
H 
						

							105
SETTING UP FUNCTIONS FROM MENUS
Setting the Image Quality
Making Advanced Color Adjustment (3)
[6-axis color adjust]
You can make fine color adjustment with the 6-
axis color adjustment box (RGB (red/green/blue)
and CMY (cyan/ magenta/yellow)).
Refer to Glossary for information on the 6-axis
color adjustment.
T
T
T
The 6-axis color adjustment box appears on the
screen if you select [Adjust].
Press [ ] / [ ] to select the [Hue] or [Saturation]
slider, and press [] to make an adjust-
ment.
Press the [MENU] button when you finish.
Reducing the Lamp Brightness
[Lamp mode]
You can reduce the lamp brightness if you want
to make the image darker or reduce the fan
noise.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Image adjustment
Advanced adjustment
6-axis color adjust
Enables the 6-axis color adjustment.
Disables the 6-axis color adjust-
ment.
zThis setting is saved for the currently
selected input signal and image
mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Adjust
Off

						

							106
SETTING UP FUNCTIONS FROM MENUS
Resetting the Image Settings
[Reset]
You can reset the current image settings to the
default settings if you want to make all image
settings all over again.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Image adjustment
Reset
Resets the image settings.
Cancels resetting of the image set-
tings.
zThe projector stores the image set-
tings for each input signal (8) and
image mode (up to 5) separately. If
you select [OK], the settings saved for
the currently selected set of the input
signal and image mode are reset.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
OK
Cancel
Performing [Color adjustment] or [Advanced
adjustment]:
A check mark ( ) appears on the Image
Adjustment menu if you perform [Color
adjustment] or [Advanced adjustment
(Dynamic gamma, Mem. color correct, or
6-axis color adjust)]. 
						

							107
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an item you want to enable in the
auto setup function.
T
T
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector automati-
cally for saving power.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Auto setup
Enables/disables the auto focusing.
Enables/disables the auto keystone
correction.
Enables/disables the auto input
selection.
Enables/disables the auto screen
color correction.
zA confirmation screen appears during
the auto setup so that you can check
which functions are enabled/disabled
(P44, 68).
zYou can manually adjust each item.
[Auto focus]: [FOCUS] button (P49)
[Auto keystone]: [KEYSTONE] button
(P50)
[Auto input]: [INPUT] button (P46, 68)
[Auto screen color]: Menu function
(P96)
zIf you select [16:9 D. image shift] for
[Screen aspect], you cannot change
the setting of each item. The auto
setup function will also be disabled.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Auto focus
Auto keystone
Auto input
Auto screen colorSystem settings
Power management mode
Disables the power management
mode.
Enters the power management
mode. The projector restarts projec-
tion when a signal is inputted or any
operation button is pressed.
Enters the exit mode and turns off
the projector automatically.
zYou cannot enable the [Direct Power
on] function if you select [Off].
zThe [POWER] indicator flashes red
and green during the power manage-
ment mode.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
Standby
Exit 
						

							108
SETTING UP FUNCTIONS FROM MENUS
Skip the POWER Button Operation
[Direct power on]
You can set the projector to be turned on when
you connect the power cord.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Beep
[Beep]
You can enable/disable the beep when you
press a button on the top control or remote con-
trol.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Direct power on
Enables the direct power on func-
tion.
Disables the direct power on func-
tion.
zWait at least 5 minutes before turning
on the projector when you turn off the
projector with the direct power on
function. It may shorten the lamp life if
you turn on the projector immediately
after turning it off.
zSet the previous [Power management
mode] to [Standby] or [Exit] in addi-
tion to this setting if you want to
enable the direct power on function.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
OnSystem settings
Beep
Disables the beep.
Enables the beep.
zIt does not beep if you mute the pro-
jector sound temporarily with the
[MUTE] button.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
On 
						

							109
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Selecting a Display Language
[Language]
You can select a language to be used in the
menu from 20 different languages.
T
T
Press the [OK] button and all words in the menu
will be displayed in the selected language.
Press the [MENU] button when you finish.
System settings
Language
English
Germany
French
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Tu r k i s h
Polish
Hungarian
Czech
Danish
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Simplified Chinese
Traditional Chinese
Korean
Japanese 
						

							110
SETTING UP FUNCTIONS FROM MENUS
Prohibiting the Projector Operation
[Key lock]
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Guide Message
[Guide]
You can enable/disable the guide message
showing how to use the projector.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Key lock
Disables the key lock function.
Prohibits the use of the top control.
Prohibits the use of the remote con-
trol.
zThe key lock function becomes effec-
tive from the moment when the [OK]
button is pressed after selecting [Main
unit] or [Remote control]. Be sure to
press the [OK] button on the top con-
trol or remote control which is not
locked.
zTo unlock the key lock function forc-
ibly, remove the power plug from the
AC outlet after the projection, and
then insert the power plug while hold-
ing down the [OK] button until the pro-
jector beeps.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
Main unit
Remote controlSystem settings
Guide
Disables the guide message.
Enables the guide message.
zThe guide message appears on the
screen when:
- The projector is turned on (P38).
- The projector is turned off (the 
[POWER] button is pressed) (P58).
- No input signal is confirmed (P34, 
62).
- The invalid button is pressed under 
NO SHOW, FREEZE, or D.ZOOM 
(P76, 77, 79).
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Off
On