Canon projector LXMU500 User Manual

11
ENGLISH
Precautions on the lamp
This projector uses a high-pressure mercury lamp, which must be handled carefully and correctly as 
described below.
The mercury lamp has the following characteristics.
• Impact, abrasion, or use after the lamp’s useful life has expired may damage lamps (which may be 
accompanied by a loud noise) or cause them to burn out.
• Useful life of lamps varies widely from lamp to lamp and depending on the environment of use. 
Lamps are not guaranteed to last for the same amount...

12
Precautions for the remote control battery
• Be sure to remove the power plug from the power outlet before replacing the lamp.
• When the lamp is damaged, shards of glass may be scattered inside the projector. Contact the Canon 
Customer Support Center for cleaning and inspection of the projector interior and lamp 
replacement.
When handling the lamp, pay attention to the following points.
•Be sure not to handle the lamp immediately after it has been used. Be sure to switch off the 
power and wait for...

13
ENGLISH
Caution for viewing 3D content
Pay attention to the following points when viewing 3D content.
• Photosensitive patients, patients with heart disease, pregnant women, elderly people, and people 
with serious illness and/or with a history of epilepsy should not view 3D content.
• We advise that you should refrain from viewing 3D content if you are in bad physical condition, 
need sleep or have been drinking alcohol.
• Stop watching 3D content if you experience the following symptoms. If you...

14
For Safe Use
Pay attention to the following points when carrying or transporting the projector.
• This projector is a precision instrument. Do not knock it over or subject it to impacts. Doing so may 
cause a malfunction.
• If the packaging or shock-absorbent materials are damaged at the time of purchase, do not reuse 
them for transporting or shipping the projector. Protection of the projector cannot be guaranteed if 
the packaging or shock-absorbent materials are damaged. Fragments from...

15
ENGLISH
Contents of package
Projector Power cord 1.8 m (70.8) Computer cable 1.8 m (70.8)
(5K.1VC09.501)
CD & QSG Important Information Warranty card Remote control 
(type number: LV-RC08) 
Battery (type number: CR2025)
(US)
(EU)
(China)
  

16
Projector exterior view
1. External control panel 
(See Projector on page 17 for details.)
2. Lamp cover
3. Vent (heated air exhaust)
4. Speaker
5. Adjuster foot
6. Projection lens
7. Front IR remote sensor
8. Lens shift wheel
9. Focus ring and Zoom ring
10. Vent (air intake)
11. Filter cover
12. LAN port/HDBaseT input terminal
13. CONTROL port
14. SERVICE port**
15. USB power out
16. HDMI input terminal
17. HDMI/MHL input terminal
18. Monitor output terminal
19. PC input terminal x 2
20. S-Video...

17
ENGLISH
Controls and functions
Projector
13. AUTO PC
Automatically determines the best picture 
timings for the displayed image. See Auto-
adjusting the image on page 38 for details.
14. OK/IMAGE
Enacts the selected On-Screen Display (OSD) 
menu item.
Selects an available picture setup mode. See 
Selecting a image mode on page 42 for details.
15. Right/
Activates panel key lock. See Locking control 
keys on page 46 for details.
When the On-Screen Display (OSD) menu is 
activated, the #10, #12, and #15...

18
Remote control: LV-RC08
1. POWER (ON/STANDBY)
Toggles the projector between standby mode and 
on. See Starting up the projector on page 33 and 
Shutting down the projector on page 47 for 
details.
2. INPUT
Displays the source selection bar. See Switching 
input signal on page 37 for details.
3. Left
Selects the desired menu items and makes 
adjustments. See Using the menus on page 34 for 
details.
4. BLANK
Used to hide the screen picture. See Hiding the 
image on page 46 for details.
5. TIMER...

19
ENGLISH
Using the remote control for the first time
Pull the tab before using the remote control.
Remote control effective range
Infra-Red (IR) remote control sensors are located on the front and top 
of the projector. The distance between the remote control and the 
sensors should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and 
the IR sensors on the projector that might obstruct the infra-red beam.
• You may not be able to perform operations if...

20
Third party software
This product includes third party software modules.
• uIP (micro IP) version 0.9
Please see the below licence text concerning the licence condition.
Copyright © 2001-2003, Adam Dunkels.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided 
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the 
following disclaimer.
2....